[Tue Oct 18 07:30:48 2011] Detection parameters:
  Position = (358.8, 439.7) = 2 4 33.50 -5 5 36.4
  Extent = 0.6" x 0.5", rotation angle = 62 degrees
  Source counts = 126.6 +/- 11.4
  Background counts = 4.4
  Rate = 0.0008 +/- 7e-05

[Tue Oct 18 07:30:51 2011] Off-axis axis estimate = 2.65'
[Tue Oct 18 07:33:03 2011] Using EEF radius (= 0.52 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:33:03 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Tue Oct 18 07:33:03 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.938
[Tue Oct 18 07:33:03 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.52"
[Tue Oct 18 07:33:04 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass0_src11.ximg exists
[Tue Oct 18 07:33:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04129_pi14-548_cl_pass0_src11.csv
[Tue Oct 18 07:33:04 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass0_src11_1.ximg exists
[Tue Oct 18 07:33:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04129_pi14-548_cl_pass0_src11.csv
[Tue Oct 18 07:33:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04129_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04129_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:33:05 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Tue Oct 18 07:33:05 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Oct 18 07:33:05 2011] Fit fullrun_ccd2_acisf04129_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Tue Oct 18 07:33:33 2011] Spatial fit model total counts = 135.995000, observed total counts = 136.000000
[Tue Oct 18 07:33:33 2011] Offset between fit and detection position for source 7 = 0.756892 pixels
[Tue Oct 18 07:33:33 2011] 135.581600 total counts/ 10.096600 bgd. counts: snr = 39.491555
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.756892 pixels
  Position = (359.3, 440.3) = 2 4 33.50 -5 5 36.4
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 125.5 +/- 11.6
  Background counts = 10.1
  Rate = 0.0008 +/- 7e-05
[Tue Oct 18 07:33:33 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:33:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:33:33 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:33:33 2011] Source does appear to be extended
[Tue Oct 18 07:33:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:34:17 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:34:17 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Tue Oct 18 07:34:17 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.909
[Tue Oct 18 07:34:17 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.53"
[Tue Oct 18 07:34:18 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass1_src11.ximg exists
[Tue Oct 18 07:34:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04129_pi14-548_cl_pass1_src11.csv
[Tue Oct 18 07:34:18 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass1_src11_1.ximg exists
[Tue Oct 18 07:34:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04129_pi14-548_cl_pass1_src11.csv
[Tue Oct 18 07:34:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04129_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04129_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:34:18 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Tue Oct 18 07:34:18 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Oct 18 07:34:18 2011] Fit fullrun_ccd2_acisf04129_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Oct 18 07:34:44 2011] Spatial fit model total counts = 135.995000, observed total counts = 136.000000
[Tue Oct 18 07:34:44 2011] Offset between fit and detection position for source 7 = 0.001732 pixels
[Tue Oct 18 07:34:44 2011] 135.931400 total counts/ 10.634400 bgd. counts: snr = 38.422372
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.001732 pixels
  Position = (359.3, 440.3) = 2 4 33.50 -5 5 36.4
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 125.3 +/- 11.7
  Background counts = 10.6
  Rate = 0.0008 +/- 7e-05
[Tue Oct 18 07:34:44 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:34:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:34:44 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:34:44 2011] Source does appear to be extended
[Tue Oct 18 07:34:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:38:40 2011] Not overwriting source region fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src7_src.reg
[Tue Oct 18 07:38:40 2011] Extracting stamp from image fullrun_ccd2_acisf04129_pi14-548_cl_sm2.00.img.gz, (335, 416) - (384, 465)
[Tue Oct 18 07:38:40 2011] Writing fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src7.gif
[Tue Oct 18 07:39:11 2011] ../../acisf04129/products/events/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src7_src.evt and ../../acisf04129/products/events/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Tue Oct 18 07:39:11 2011] Size of ../../acisf04129/products/events/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src7_src.evt.gz[events] = 128 counts
[Tue Oct 18 07:39:11 2011] Mean chipx,y = (357.95, 928.30)
[Tue Oct 18 07:39:11 2011] Mean tdetx,y = (3989.30, 3728.05)
[Tue Oct 18 07:39:11 2011] chipx,y range = (340.00-375.00, 912.00-947.00)
[Tue Oct 18 07:39:11 2011] Size of ../../acisf04129/products/events/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 28 counts
[Tue Oct 18 07:39:11 2011] ../../acisf04129/products/images/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src7_src.img and ../../acisf04129/products/images/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Tue Oct 18 07:39:11 2011] ../../acisf04129/products/spectra/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src7_src.pi and ../../acisf04129/products/spectra/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Tue Oct 18 07:39:14 2011] ../../acisf04129/products/lightcurves/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src7_src.lc and ../../acisf04129/products/lightcurves/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Tue Oct 18 07:40:54 2011] Keeping rmf generated by specextract
[Tue Oct 18 07:40:54 2011] 195.715
[Tue Oct 18 07:43:46 2011] Updating aperture counts using extracted products
[Tue Oct 18 07:43:46 2011] Error reading totcts from fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src7_src.pi.gz
[Tue Oct 18 07:43:46 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 07:43:46 2011] Using photon index=1.80, rate=0.000782, arf fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src7.arf
[Tue Oct 18 07:43:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 07:43:46 2011] Updating source flux to 8.8e-15