[Tue Oct 18 07:30:49 2011] Detection parameters:
  Position = (894.8, 257.2) = 2 4 15.85 -5 7 6.2
  Extent = 1.3" x 0.7", rotation angle = 58 degrees
  Source counts = 88.4 +/- 10.4
  Background counts = 19.6
  Rate = 0.0006 +/- 6e-05

[Tue Oct 18 07:30:51 2011] Off-axis axis estimate = 7.26'
[Tue Oct 18 07:33:03 2011] Using EEF radius (= 2.34 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:33:03 2011] Initial guess for spatial extent in simple fitting = 2.34"
[Tue Oct 18 07:33:03 2011] source mask rpix=4.8, npix_max = 110, mask sum = 100, frac = 0.907
[Tue Oct 18 07:33:03 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 2.34"
[Tue Oct 18 07:33:04 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass0_src14.ximg exists
[Tue Oct 18 07:33:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04129_pi14-548_cl_pass0_src14.csv
[Tue Oct 18 07:33:04 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass0_src14_1.ximg exists
[Tue Oct 18 07:33:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04129_pi14-548_cl_pass0_src14.csv
[Tue Oct 18 07:33:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04129_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04129_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:33:05 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Tue Oct 18 07:33:05 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Tue Oct 18 07:33:05 2011] Fit fullrun_ccd2_acisf04129_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Tue Oct 18 07:33:33 2011] Spatial fit model total counts = 117.782000, observed total counts = 118.000000
[Tue Oct 18 07:33:33 2011] Offset between fit and detection position for source 31 = 0.901948 pixels
[Tue Oct 18 07:33:33 2011] 117.639000 total counts/ 44.044000 bgd. counts: snr = 11.089320
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.901948 pixels
  Position = (895.5, 257.8) = 2 4 15.84 -5 7 6.2
  Extent = 1.9 (1.2-2.5)", rotation angle = 0
  Source counts = 73.6 +/- 10.8
  Background counts = 44.0
  Rate = 0.0005 +/- 7e-05
[Tue Oct 18 07:33:33 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:33:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:33:33 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:33:33 2011] Source does appear to be extended
[Tue Oct 18 07:33:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:34:17 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:34:17 2011] Initial guess for spatial extent in simple fitting = 1.85"
[Tue Oct 18 07:34:17 2011] source mask rpix=3.8, npix_max = 72, mask sum = 72, frac = 0.991
[Tue Oct 18 07:34:17 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 1.85"
[Tue Oct 18 07:34:18 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass1_src14.ximg exists
[Tue Oct 18 07:34:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04129_pi14-548_cl_pass1_src14.csv
[Tue Oct 18 07:34:18 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass1_src14_1.ximg exists
[Tue Oct 18 07:34:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04129_pi14-548_cl_pass1_src14.csv
[Tue Oct 18 07:34:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04129_pi14-548_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04129_pi14-548_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:34:18 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Tue Oct 18 07:34:18 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Tue Oct 18 07:34:18 2011] Fit fullrun_ccd2_acisf04129_pi14-548_cl_pass1_tfrozen_src14 appears to have run properly
[Tue Oct 18 07:34:44 2011] Spatial fit model total counts = 103.506000, observed total counts = 104.000000
[Tue Oct 18 07:34:44 2011] Offset between fit and detection position for source 31 = 1.095487 pixels
[Tue Oct 18 07:34:44 2011] 103.995900 total counts/ 49.188600 bgd. counts: snr = 7.814590
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 1.095487 pixels
  Position = (895.0, 256.8) = 2 4 15.86 -5 7 6.6
  Extent = 1.4 (1.0-2.0)", rotation angle = 0
  Source counts = 54.8 +/- 10.2
  Background counts = 49.2
  Rate = 0.0003 +/- 6e-05
[Tue Oct 18 07:34:44 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:34:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:34:44 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:34:44 2011] Source does appear to be extended
[Tue Oct 18 07:34:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:38:40 2011] Not overwriting source region fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src31_src.reg
[Tue Oct 18 07:38:40 2011] Extracting stamp from image fullrun_ccd2_acisf04129_pi14-548_cl_sm2.00.img.gz, (831, 193) - (959, 321)
[Tue Oct 18 07:38:40 2011] Writing fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src31.gif
[Tue Oct 18 07:39:20 2011] ../../acisf04129/products/events/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src31_src.evt and ../../acisf04129/products/events/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src31_bgd.evt exist, delete to re-create
[Tue Oct 18 07:39:20 2011] Size of ../../acisf04129/products/events/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src31_src.evt.gz[events] = 96 counts
[Tue Oct 18 07:39:20 2011] Mean chipx,y = (908.80, 800.03)
[Tue Oct 18 07:39:20 2011] Mean tdetx,y = (3861.03, 3177.20)
[Tue Oct 18 07:39:20 2011] chipx,y range = (890.00-928.00, 776.00-830.00)
[Tue Oct 18 07:39:20 2011] Size of ../../acisf04129/products/events/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src31_bgd.evt.gz[events] = 150 counts
[Tue Oct 18 07:39:20 2011] ../../acisf04129/products/images/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src31_src.img and ../../acisf04129/products/images/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src31_bgd.img exist, delete to re-create
[Tue Oct 18 07:39:20 2011] ../../acisf04129/products/spectra/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src31_src.pi and ../../acisf04129/products/spectra/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src31_bgd.pi exist, delete to re-create
[Tue Oct 18 07:39:20 2011] Not generating rmf since there are only 54 counts
[Tue Oct 18 07:39:22 2011] ../../acisf04129/products/lightcurves/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src31_src.lc and ../../acisf04129/products/lightcurves/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src31_bgd.lc exist, delete to re-create
[Tue Oct 18 07:40:55 2011] 170.584
[Tue Oct 18 07:43:46 2011] Updating aperture counts using extracted products
[Tue Oct 18 07:43:46 2011] Error reading totcts from fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src31_src.pi.gz
[Tue Oct 18 07:43:46 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 07:43:46 2011] Using photon index=1.80, rate=0.000342, arf fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src31.arf
[Tue Oct 18 07:43:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 07:43:46 2011] Updating source flux to 4.4e-15
[Tue Oct 18 07:44:41 2011] Source 31 has fewer than 100.000000 counts, skipping spectral fitting