[Tue Oct 18 07:30:48 2011] Detection parameters:
  Position = (182.2, 605.3) = 2 4 39.32 -5 4 15.0
  Extent = 0.6" x 0.5", rotation angle = 59 degrees
  Source counts = 47.6 +/- 7.1
  Background counts = 3.4
  Rate = 0.0003 +/- 4e-05

[Tue Oct 18 07:30:51 2011] Off-axis axis estimate = 1.57'
[Tue Oct 18 07:33:03 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:33:03 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Tue Oct 18 07:33:03 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.880
[Tue Oct 18 07:33:03 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 0.40"
[Tue Oct 18 07:33:04 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass0_src21.ximg exists
[Tue Oct 18 07:33:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04129_pi14-548_cl_pass0_src21.csv
[Tue Oct 18 07:33:04 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass0_src21_1.ximg exists
[Tue Oct 18 07:33:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04129_pi14-548_cl_pass0_src21.csv
[Tue Oct 18 07:33:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04129_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04129_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:33:05 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Tue Oct 18 07:33:05 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Tue Oct 18 07:33:05 2011] Fit fullrun_ccd2_acisf04129_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Tue Oct 18 07:33:33 2011] Spatial fit model total counts = 65.001500, observed total counts = 65.000000
[Tue Oct 18 07:33:33 2011] Offset between fit and detection position for source 15 = 0.814766 pixels
[Tue Oct 18 07:33:33 2011] 66.891200 total counts/ 21.993700 bgd. counts: snr = 9.573550
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.814766 pixels
  Position = (182.8, 605.8) = 2 4 39.31 -5 4 15.0
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 44.9 +/- 8.2
  Background counts = 22.0
  Rate = 0.0003 +/- 5e-05
[Tue Oct 18 07:33:33 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:33:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:33:33 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:33:33 2011] Source does appear to be extended
[Tue Oct 18 07:33:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:34:17 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:34:17 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Tue Oct 18 07:34:17 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.134
[Tue Oct 18 07:34:17 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 0.45"
[Tue Oct 18 07:34:18 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass1_src21.ximg exists
[Tue Oct 18 07:34:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04129_pi14-548_cl_pass1_src21.csv
[Tue Oct 18 07:34:18 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass1_src21_1.ximg exists
[Tue Oct 18 07:34:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04129_pi14-548_cl_pass1_src21.csv
[Tue Oct 18 07:34:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04129_pi14-548_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04129_pi14-548_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:34:19 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass1_tfrozen_src21.ximg exists
[Tue Oct 18 07:34:19 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass1_tfrozen_src21_1.ximg exists
[Tue Oct 18 07:34:19 2011] Fit fullrun_ccd2_acisf04129_pi14-548_cl_pass1_tfrozen_src21 appears to have run properly
[Tue Oct 18 07:34:44 2011] Spatial fit model total counts = 65.386500, observed total counts = 65.000000
[Tue Oct 18 07:34:44 2011] Offset between fit and detection position for source 15 = 0.002950 pixels
[Tue Oct 18 07:34:44 2011] 66.484600 total counts/ 21.197600 bgd. counts: snr = 9.836265
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.002950 pixels
  Position = (182.8, 605.8) = 2 4 39.31 -5 4 15.0
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 45.3 +/- 8.2
  Background counts = 21.2
  Rate = 0.0003 +/- 5e-05
[Tue Oct 18 07:34:44 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:34:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:34:44 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:34:44 2011] Source does appear to be extended
[Tue Oct 18 07:34:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:38:40 2011] Not overwriting source region fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src15_src.reg
[Tue Oct 18 07:38:40 2011] Extracting stamp from image fullrun_ccd2_acisf04129_pi14-548_cl_sm2.00.img.gz, (162, 585) - (203, 626)
[Tue Oct 18 07:38:40 2011] Writing fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src15.gif
[Tue Oct 18 07:39:39 2011] ../../acisf04129/products/events/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src15_src.evt and ../../acisf04129/products/events/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src15_bgd.evt exist, delete to re-create
[Tue Oct 18 07:39:39 2011] Size of ../../acisf04129/products/events/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src15_src.evt.gz[events] = 48 counts
[Tue Oct 18 07:39:39 2011] Mean chipx,y = (112.90, 880.25)
[Tue Oct 18 07:39:39 2011] Mean tdetx,y = (3941.25, 3973.10)
[Tue Oct 18 07:39:39 2011] chipx,y range = (103.00-137.00, 864.00-898.00)
[Tue Oct 18 07:39:39 2011] Size of ../../acisf04129/products/events/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 19 counts
[Tue Oct 18 07:39:39 2011] ../../acisf04129/products/images/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src15_src.img and ../../acisf04129/products/images/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src15_bgd.img exist, delete to re-create
[Tue Oct 18 07:39:39 2011] ../../acisf04129/products/spectra/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src15_src.pi and ../../acisf04129/products/spectra/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src15_bgd.pi exist, delete to re-create
[Tue Oct 18 07:39:39 2011] Not generating rmf since there are only 45 counts
[Tue Oct 18 07:39:41 2011] ../../acisf04129/products/lightcurves/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src15_src.lc and ../../acisf04129/products/lightcurves/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src15_bgd.lc exist, delete to re-create
[Tue Oct 18 07:40:55 2011] 165.248
[Tue Oct 18 07:43:46 2011] Updating aperture counts using extracted products
[Tue Oct 18 07:43:46 2011] Error reading totcts from fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src15_src.pi.gz
[Tue Oct 18 07:43:46 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 07:43:46 2011] Using photon index=1.80, rate=0.000283, arf fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src15.arf
[Tue Oct 18 07:43:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 07:43:46 2011] Updating source flux to 3.8e-15
[Tue Oct 18 07:44:41 2011] Source 15 has fewer than 100.000000 counts, skipping spectral fitting