[Tue Oct 18 07:30:47 2011] Detection parameters:
  Position = (912.8, 1000.5) = 2 5 2.77 -5 3 46.3
  Extent = 0.8" x 0.5", rotation angle = 132 degrees
  Source counts = 17.3 +/- 4.6
  Background counts = 3.7
  Rate = 0.0001 +/- 3e-05

[Tue Oct 18 07:30:47 2011] Off-axis axis estimate = 4.90'
[Tue Oct 18 07:33:01 2011] Using EEF radius (= 1.14 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:33:01 2011] Initial guess for spatial extent in simple fitting = 1.14"
[Tue Oct 18 07:33:01 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.945
[Tue Oct 18 07:33:01 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 1.14"
[Tue Oct 18 07:33:02 2011] fullrun_ccd1_acisf04129_pi14-548_cl_pass0_src30.ximg exists
[Tue Oct 18 07:33:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04129_pi14-548_cl_pass0_src30.csv
[Tue Oct 18 07:33:02 2011] fullrun_ccd1_acisf04129_pi14-548_cl_pass0_src30_1.ximg exists
[Tue Oct 18 07:33:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04129_pi14-548_cl_pass0_src30.csv
[Tue Oct 18 07:33:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf04129_pi14-548_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf04129_pi14-548_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:33:03 2011] fullrun_ccd1_acisf04129_pi14-548_cl_pass0_tfrozen_src30.ximg exists
[Tue Oct 18 07:33:03 2011] fullrun_ccd1_acisf04129_pi14-548_cl_pass0_tfrozen_src30_1.ximg exists
[Tue Oct 18 07:33:03 2011] Fit fullrun_ccd1_acisf04129_pi14-548_cl_pass0_tfrozen_src30 appears to have run properly
[Tue Oct 18 07:33:27 2011] Spatial fit model total counts = 28.849100, observed total counts = 29.000000
[Tue Oct 18 07:33:27 2011] Offset between fit and detection position for source 45 = 0.389476 pixels
[Tue Oct 18 07:33:27 2011] 28.907200 total counts/ 12.255200 bgd. counts: snr = 4.756705
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 0.389476 pixels
  Position = (912.9, 1000.9) = 2 5 2.79 -5 3 46.4
  Extent = 1.1 (0.4-1.8)", rotation angle = 0
  Source counts = 16.7 +/- 5.4
  Background counts = 12.3
  Rate = 0.0001 +/- 3e-05
[Tue Oct 18 07:33:27 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:33:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:33:27 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:33:27 2011] Source does appear to be extended
[Tue Oct 18 07:33:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:34:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:34:13 2011] Initial guess for spatial extent in simple fitting = 1.06"
[Tue Oct 18 07:34:13 2011] source mask rpix=2.1, npix_max = 28, mask sum = 36, frac = 1.285
[Tue Oct 18 07:34:13 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 1.06"
[Tue Oct 18 07:34:14 2011] fullrun_ccd1_acisf04129_pi14-548_cl_pass1_src30.ximg exists
[Tue Oct 18 07:34:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04129_pi14-548_cl_pass1_src30.csv
[Tue Oct 18 07:34:14 2011] fullrun_ccd1_acisf04129_pi14-548_cl_pass1_src30_1.ximg exists
[Tue Oct 18 07:34:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04129_pi14-548_cl_pass1_src30.csv
[Tue Oct 18 07:34:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf04129_pi14-548_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf04129_pi14-548_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:34:16 2011] fullrun_ccd1_acisf04129_pi14-548_cl_pass1_tfrozen_src30.ximg exists
[Tue Oct 18 07:34:16 2011] fullrun_ccd1_acisf04129_pi14-548_cl_pass1_tfrozen_src30_1.ximg exists
[Tue Oct 18 07:34:16 2011] Fit fullrun_ccd1_acisf04129_pi14-548_cl_pass1_tfrozen_src30 appears to have run properly
[Tue Oct 18 07:34:38 2011] Spatial fit model total counts = 28.998000, observed total counts = 29.000000
[Tue Oct 18 07:34:38 2011] Offset between fit and detection position for source 45 = 0.176249 pixels
[Tue Oct 18 07:34:38 2011] 29.013200 total counts/ 12.258500 bgd. counts: snr = 4.785397
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 0.176249 pixels
  Position = (913.0, 1000.8) = 2 5 2.78 -5 3 46.4
  Extent = 1.0 (0.4-2.0)", rotation angle = 0
  Source counts = 16.8 +/- 5.4
  Background counts = 12.3
  Rate = 0.0001 +/- 3e-05
[Tue Oct 18 07:34:38 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:34:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:34:38 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:34:38 2011] Source does appear to be extended
[Tue Oct 18 07:34:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:36:59 2011] Not overwriting source region fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src45_src.reg
[Tue Oct 18 07:36:59 2011] Extracting stamp from image fullrun_ccd1_acisf04129_pi14-548_cl_sm2.00.img.gz, (866, 954) - (960, 1048)
[Tue Oct 18 07:36:59 2011] Writing fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src45.gif
[Tue Oct 18 07:38:24 2011] ../../acisf04129/products/events/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src45_src.evt and ../../acisf04129/products/events/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src45_bgd.evt exist, delete to re-create
[Tue Oct 18 07:38:24 2011] Size of ../../acisf04129/products/events/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src45_src.evt.gz[events] = 28 counts
[Tue Oct 18 07:38:24 2011] Mean chipx,y = (495.39, 868.39)
[Tue Oct 18 07:38:24 2011] Mean tdetx,y = (4263.61, 4602.39)
[Tue Oct 18 07:38:24 2011] chipx,y range = (480.00-511.00, 843.00-888.00)
[Tue Oct 18 07:38:24 2011] Size of ../../acisf04129/products/events/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src45_bgd.evt.gz[events] = 86 counts
[Tue Oct 18 07:38:24 2011] ../../acisf04129/products/images/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src45_src.img and ../../acisf04129/products/images/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src45_bgd.img exist, delete to re-create
[Tue Oct 18 07:38:24 2011] ../../acisf04129/products/spectra/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src45_src.pi and ../../acisf04129/products/spectra/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src45_bgd.pi exist, delete to re-create
[Tue Oct 18 07:38:24 2011] Not generating rmf since there are only 16 counts
[Tue Oct 18 07:38:27 2011] ../../acisf04129/products/lightcurves/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src45_src.lc and ../../acisf04129/products/lightcurves/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src45_bgd.lc exist, delete to re-create
[Tue Oct 18 07:38:39 2011] 192.473
[Tue Oct 18 07:43:45 2011] Updating aperture counts using extracted products
[Tue Oct 18 07:43:45 2011] Error reading totcts from fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src45_src.pi.gz
[Tue Oct 18 07:43:45 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 07:43:45 2011] Using photon index=1.80, rate=0.000105, arf fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src45.arf
[Tue Oct 18 07:43:45 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 07:43:45 2011] Updating source flux to 1.2e-15
[Tue Oct 18 07:44:26 2011] Source 45 has fewer than 100.000000 counts, skipping spectral fitting