[Tue Oct 18 07:30:47 2011] Detection parameters:
  Position = (848.1, 885.5) = 2 5 4.90 -5 4 42.9
  Extent = 0.6" x 0.5", rotation angle = 75 degrees
  Source counts = 15.9 +/- 4.4
  Background counts = 3.1
  Rate = 0.0001 +/- 3e-05

[Tue Oct 18 07:30:47 2011] Off-axis axis estimate = 5.22'
[Tue Oct 18 07:33:01 2011] Using EEF radius (= 1.27 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:33:01 2011] Initial guess for spatial extent in simple fitting = 1.27"
[Tue Oct 18 07:33:01 2011] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.105
[Tue Oct 18 07:33:01 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 1.27"
[Tue Oct 18 07:33:02 2011] fullrun_ccd1_acisf04129_pi14-548_cl_pass0_src31.ximg exists
[Tue Oct 18 07:33:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04129_pi14-548_cl_pass0_src31.csv
[Tue Oct 18 07:33:02 2011] fullrun_ccd1_acisf04129_pi14-548_cl_pass0_src31_1.ximg exists
[Tue Oct 18 07:33:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04129_pi14-548_cl_pass0_src31.csv
[Tue Oct 18 07:33:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf04129_pi14-548_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf04129_pi14-548_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:33:03 2011] fullrun_ccd1_acisf04129_pi14-548_cl_pass0_tfrozen_src31.ximg exists
[Tue Oct 18 07:33:03 2011] fullrun_ccd1_acisf04129_pi14-548_cl_pass0_tfrozen_src31_1.ximg exists
[Tue Oct 18 07:33:03 2011] Fit fullrun_ccd1_acisf04129_pi14-548_cl_pass0_tfrozen_src31 appears to have run properly
[Tue Oct 18 07:33:27 2011] Spatial fit model total counts = 21.056600, observed total counts = 23.000000
[Tue Oct 18 07:33:27 2011] Offset between fit and detection position for source 40 = 0.678352 pixels
[Tue Oct 18 07:33:27 2011] 21.313060 total counts/ 3.591060 bgd. counts: snr = 9.351933
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.678352 pixels
  Position = (848.5, 886.1) = 2 5 4.91 -5 4 42.8
  Extent = 0.8 (0.6-1.1)", rotation angle = 0
  Source counts = 17.7 +/- 4.6
  Background counts = 3.6
  Rate = 0.0001 +/- 3e-05
[Tue Oct 18 07:33:27 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:33:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:33:27 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:33:27 2011] Source does appear to be extended
[Tue Oct 18 07:33:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:34:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:34:13 2011] Initial guess for spatial extent in simple fitting = 0.76"
[Tue Oct 18 07:34:13 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.966
[Tue Oct 18 07:34:13 2011] Giving source the simple spatial ID 31 for pass 1, mean size = 0.76"
[Tue Oct 18 07:34:14 2011] fullrun_ccd1_acisf04129_pi14-548_cl_pass1_src31.ximg exists
[Tue Oct 18 07:34:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04129_pi14-548_cl_pass1_src31.csv
[Tue Oct 18 07:34:14 2011] fullrun_ccd1_acisf04129_pi14-548_cl_pass1_src31_1.ximg exists
[Tue Oct 18 07:34:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04129_pi14-548_cl_pass1_src31.csv
[Tue Oct 18 07:34:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf04129_pi14-548_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf04129_pi14-548_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:34:16 2011] fullrun_ccd1_acisf04129_pi14-548_cl_pass1_tfrozen_src31.ximg exists
[Tue Oct 18 07:34:16 2011] fullrun_ccd1_acisf04129_pi14-548_cl_pass1_tfrozen_src31_1.ximg exists
[Tue Oct 18 07:34:16 2011] Fit fullrun_ccd1_acisf04129_pi14-548_cl_pass1_tfrozen_src31 appears to have run properly
[Tue Oct 18 07:34:38 2011] Spatial fit model total counts = 21.563100, observed total counts = 22.000000
[Tue Oct 18 07:34:38 2011] Offset between fit and detection position for source 40 = 0.075503 pixels
[Tue Oct 18 07:34:38 2011] 21.985010 total counts/ 4.794810 bgd. counts: snr = 7.850462
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.075503 pixels
  Position = (848.5, 886.0) = 2 5 4.91 -5 4 42.9
  Extent = 0.8 (0.6-1.1)", rotation angle = 0
  Source counts = 17.2 +/- 4.7
  Background counts = 4.8
  Rate = 0.0001 +/- 3e-05
[Tue Oct 18 07:34:38 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:34:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:34:38 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:34:38 2011] Source does appear to be extended
[Tue Oct 18 07:34:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:36:59 2011] Not overwriting source region fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src40_src.reg
[Tue Oct 18 07:36:59 2011] Extracting stamp from image fullrun_ccd1_acisf04129_pi14-548_cl_sm2.00.img.gz, (814, 852) - (883, 920)
[Tue Oct 18 07:36:59 2011] Writing fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src40.gif
[Tue Oct 18 07:38:27 2011] ../../acisf04129/products/events/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src40_src.evt and ../../acisf04129/products/events/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src40_bgd.evt exist, delete to re-create
[Tue Oct 18 07:38:27 2011] Size of ../../acisf04129/products/events/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src40_src.evt.gz[events] = 19 counts
[Tue Oct 18 07:38:27 2011] Mean chipx,y = (489.11, 736.68)
[Tue Oct 18 07:38:27 2011] Mean tdetx,y = (4395.32, 4596.11)
[Tue Oct 18 07:38:27 2011] chipx,y range = (477.00-509.00, 720.00-751.00)
[Tue Oct 18 07:38:27 2011] Size of ../../acisf04129/products/events/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src40_bgd.evt.gz[events] = 61 counts
[Tue Oct 18 07:38:27 2011] ../../acisf04129/products/images/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src40_src.img and ../../acisf04129/products/images/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src40_bgd.img exist, delete to re-create
[Tue Oct 18 07:38:27 2011] ../../acisf04129/products/spectra/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src40_src.pi and ../../acisf04129/products/spectra/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src40_bgd.pi exist, delete to re-create
[Tue Oct 18 07:38:27 2011] Not generating rmf since there are only 17 counts
[Tue Oct 18 07:38:30 2011] ../../acisf04129/products/lightcurves/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src40_src.lc and ../../acisf04129/products/lightcurves/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src40_bgd.lc exist, delete to re-create
[Tue Oct 18 07:38:39 2011] 191.951
[Tue Oct 18 07:43:45 2011] Updating aperture counts using extracted products
[Tue Oct 18 07:43:45 2011] Error reading totcts from fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src40_src.pi.gz
[Tue Oct 18 07:43:45 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 07:43:45 2011] Using photon index=1.80, rate=0.000107, arf fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src40.arf
[Tue Oct 18 07:43:45 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 07:43:45 2011] Updating source flux to 1.2e-15
[Tue Oct 18 07:44:26 2011] Source 40 has fewer than 100.000000 counts, skipping spectral fitting