[Tue Oct 18 07:30:45 2011] Detection parameters:
  Position = (439.5, 854.2) = 2 5 18.36 -5 4 58.3
  Extent = 3.1" x 2.9", rotation angle = 172 degrees
  Source counts = 296.5 +/- 19.4
  Background counts = 80.5
  Rate = 0.002 +/- 0.0001

[Tue Oct 18 07:30:47 2011] Off-axis axis estimate = 8.55'
[Tue Oct 18 07:33:01 2011] Using EEF radius (= 3.23 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:33:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 18 07:33:01 2011] Initial guess for spatial extent in simple fitting = 3.23"
[Tue Oct 18 07:33:01 2011] source mask rpix=6.6, npix_max = 199, mask sum = 210, frac = 1.053
[Tue Oct 18 07:33:01 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 3.23"
[Tue Oct 18 07:33:01 2011] fullrun_ccd1_acisf04129_pi14-548_cl_pass0_src5.ximg exists
[Tue Oct 18 07:33:01 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf04129_pi14-548_cl_pass0_src5.csv
[Tue Oct 18 07:33:01 2011] fullrun_ccd1_acisf04129_pi14-548_cl_pass0_src5_1.ximg exists
[Tue Oct 18 07:33:01 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf04129_pi14-548_cl_pass0_src5.csv
[Tue Oct 18 07:33:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf04129_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf04129_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:33:02 2011] fullrun_ccd1_acisf04129_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Tue Oct 18 07:33:02 2011] fullrun_ccd1_acisf04129_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Oct 18 07:33:02 2011] Fit fullrun_ccd1_acisf04129_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Oct 18 07:33:27 2011] Spatial fit model total counts = 356.998000, observed total counts = 357.000000
[Tue Oct 18 07:33:27 2011] Offset between fit and detection position for source 3 = 1.602156 pixels
[Tue Oct 18 07:33:27 2011] 356.991000 total counts/ 101.254000 bgd. counts: snr = 25.414845
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.602156 pixels
  Position = (440.7, 855.2) = 2 5 18.34 -5 4 58.0
  Extent = 2.4 (2.1-2.7)", rotation angle = 0
  Source counts = 255.7 +/- 18.9
  Background counts = 101.3
  Rate = 0.002 +/- 0.0001
[Tue Oct 18 07:33:27 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:33:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:33:27 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:33:27 2011] Source does appear to be extended
[Tue Oct 18 07:33:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:34:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:34:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 18 07:34:13 2011] Initial guess for spatial extent in simple fitting = 2.43"
[Tue Oct 18 07:34:13 2011] source mask rpix=4.9, npix_max = 118, mask sum = 121, frac = 1.020
[Tue Oct 18 07:34:13 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 2.43"
[Tue Oct 18 07:34:14 2011] fullrun_ccd1_acisf04129_pi14-548_cl_pass1_src5.ximg exists
[Tue Oct 18 07:34:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04129_pi14-548_cl_pass1_src5.csv
[Tue Oct 18 07:34:14 2011] fullrun_ccd1_acisf04129_pi14-548_cl_pass1_src5_1.ximg exists
[Tue Oct 18 07:34:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04129_pi14-548_cl_pass1_src5.csv
[Tue Oct 18 07:34:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf04129_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf04129_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:34:14 2011] fullrun_ccd1_acisf04129_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Tue Oct 18 07:34:14 2011] fullrun_ccd1_acisf04129_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Oct 18 07:34:14 2011] Fit fullrun_ccd1_acisf04129_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Oct 18 07:34:38 2011] Spatial fit model total counts = 317.000000, observed total counts = 317.000000
[Tue Oct 18 07:34:38 2011] Offset between fit and detection position for source 3 = 0.174320 pixels
[Tue Oct 18 07:34:38 2011] 317.275000 total counts/ 105.573000 bgd. counts: snr = 20.603857
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.174320 pixels
  Position = (440.6, 855.3) = 2 5 18.34 -5 4 58.0
  Extent = 2.0 (1.6-2.4)", rotation angle = 0
  Source counts = 211.7 +/- 17.8
  Background counts = 105.6
  Rate = 0.001 +/- 0.0001
[Tue Oct 18 07:34:38 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:34:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:34:38 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:34:38 2011] Source does appear to be extended
[Tue Oct 18 07:34:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:36:59 2011] Not overwriting source region fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src3_src.reg
[Tue Oct 18 07:36:59 2011] Extracting stamp from image fullrun_ccd1_acisf04129_pi14-548_cl_sm2.00.img.gz, (347, 762) - (534, 949)
[Tue Oct 18 07:36:59 2011] Writing fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src3.gif
[Tue Oct 18 07:37:12 2011] ../../acisf04129/products/events/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src3_src.evt and ../../acisf04129/products/events/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Tue Oct 18 07:37:12 2011] Size of ../../acisf04129/products/events/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src3_src.evt.gz[events] = 318 counts
[Tue Oct 18 07:37:12 2011] Mean chipx,y = (825.17, 491.30)
[Tue Oct 18 07:37:12 2011] Mean tdetx,y = (4640.70, 4932.17)
[Tue Oct 18 07:37:12 2011] chipx,y range = (797.00-855.00, 461.00-523.00)
[Tue Oct 18 07:37:12 2011] Size of ../../acisf04129/products/events/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 344 counts
[Tue Oct 18 07:37:12 2011] ../../acisf04129/products/images/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src3_src.img and ../../acisf04129/products/images/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Tue Oct 18 07:37:12 2011] ../../acisf04129/products/spectra/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src3_src.pi and ../../acisf04129/products/spectra/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Tue Oct 18 07:37:15 2011] ../../acisf04129/products/lightcurves/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src3_src.lc and ../../acisf04129/products/lightcurves/fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Tue Oct 18 07:38:38 2011] Keeping rmf generated by specextract
[Tue Oct 18 07:38:38 2011] 174.78
[Tue Oct 18 07:43:45 2011] Updating aperture counts using extracted products
[Tue Oct 18 07:43:45 2011] Error reading totcts from fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src3_src.pi.gz
[Tue Oct 18 07:43:45 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 07:43:45 2011] Using photon index=1.80, rate=0.00132, arf fullrun_ccd1_acisf04129_pi14-548_pass1_cl_src3.arf
[Tue Oct 18 07:43:45 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 07:43:45 2011] Updating source flux to 1.7e-14