[Tue Oct 18 07:30:44 2011] Detection parameters:
  Position = (606.9, 978.1) = 2 4 54.60 -4 56 35.5
  Extent = 4.0" x 1.8", rotation angle = 123 degrees
  Source counts = 28.1 +/- 8.0
  Background counts = 35.9
  Rate = 0.0002 +/- 5e-05

[Tue Oct 18 07:30:44 2011] Off-axis axis estimate = 9.08'
[Tue Oct 18 07:32:58 2011] Using EEF radius (= 3.64 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:32:58 2011] Initial guess for spatial extent in simple fitting = 3.64"
[Tue Oct 18 07:32:58 2011] source mask rpix=7.4, npix_max = 250, mask sum = 256, frac = 1.024
[Tue Oct 18 07:32:58 2011] Giving source the simple spatial ID 32 for pass 0, mean size = 3.64"
[Tue Oct 18 07:32:59 2011] fullrun_ccd0_acisf04129_pi14-548_cl_pass0_src32.ximg exists
[Tue Oct 18 07:32:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04129_pi14-548_cl_pass0_src32.csv
[Tue Oct 18 07:32:59 2011] fullrun_ccd0_acisf04129_pi14-548_cl_pass0_src32_1.ximg exists
[Tue Oct 18 07:32:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04129_pi14-548_cl_pass0_src32.csv
[Tue Oct 18 07:32:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf04129_pi14-548_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf04129_pi14-548_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:33:00 2011] fullrun_ccd0_acisf04129_pi14-548_cl_pass0_tfrozen_src32.ximg exists
[Tue Oct 18 07:33:00 2011] fullrun_ccd0_acisf04129_pi14-548_cl_pass0_tfrozen_src32_1.ximg exists
[Tue Oct 18 07:33:00 2011] Fit fullrun_ccd0_acisf04129_pi14-548_cl_pass0_tfrozen_src32 appears to have run properly
[Tue Oct 18 07:33:22 2011] Spatial fit model total counts = 153.659000, observed total counts = 152.000000
[Tue Oct 18 07:33:22 2011] Offset between fit and detection position for source 48 = 1.744299 pixels
[Tue Oct 18 07:33:22 2011] 153.751100 total counts/ 126.045000 bgd. counts: snr = 2.467815
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 1.744299 pixels
  Position = (608.1, 979.4) = 2 4 54.58 -4 56 35.1
  Extent = 2.1 (1.4-3.0)", rotation angle = 0
  Source counts = 27.7 +/- 12.4
  Background counts = 126.0
  Rate = 0.0002 +/- 8e-05
[Tue Oct 18 07:33:22 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:33:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:33:22 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:33:22 2011] Source does appear to be extended
[Tue Oct 18 07:33:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:34:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:34:10 2011] Initial guess for spatial extent in simple fitting = 2.10"
[Tue Oct 18 07:34:10 2011] source mask rpix=4.3, npix_max = 91, mask sum = 90, frac = 0.988
[Tue Oct 18 07:34:10 2011] Giving source the simple spatial ID 27 for pass 1, mean size = 2.10"
[Tue Oct 18 07:34:12 2011] fullrun_ccd0_acisf04129_pi14-548_cl_pass1_src27.ximg exists
[Tue Oct 18 07:34:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04129_pi14-548_cl_pass1_src27.csv
[Tue Oct 18 07:34:12 2011] fullrun_ccd0_acisf04129_pi14-548_cl_pass1_src27_1.ximg exists
[Tue Oct 18 07:34:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04129_pi14-548_cl_pass1_src27.csv
[Tue Oct 18 07:34:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf04129_pi14-548_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf04129_pi14-548_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:34:13 2011] fullrun_ccd0_acisf04129_pi14-548_cl_pass1_tfrozen_src27.ximg exists
[Tue Oct 18 07:34:13 2011] fullrun_ccd0_acisf04129_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists
[Tue Oct 18 07:34:13 2011] Fit fullrun_ccd0_acisf04129_pi14-548_cl_pass1_tfrozen_src27 appears to have run properly
[Tue Oct 18 07:34:33 2011] Spatial fit model total counts = 74.659900, observed total counts = 74.000000
[Tue Oct 18 07:34:33 2011] Offset between fit and detection position for source 48 = 0.082425 pixels
[Tue Oct 18 07:34:33 2011] 74.875800 total counts/ 48.754900 bgd. counts: snr = 3.740925
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 0.082425 pixels
  Position = (608.1, 979.3) = 2 4 54.58 -4 56 35.2
  Extent = 2.0 (1.2-3.0)", rotation angle = 0
  Source counts = 26.1 +/- 8.7
  Background counts = 48.8
  Rate = 0.0002 +/- 5e-05
[Tue Oct 18 07:34:33 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:34:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:34:33 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:34:33 2011] Source does appear to be extended
[Tue Oct 18 07:34:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:35:19 2011] Not overwriting source region fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src48_src.reg
[Tue Oct 18 07:35:19 2011] Extracting stamp from image fullrun_ccd0_acisf04129_pi14-548_cl_sm2.00.img.gz, (515, 886) - (701, 1072)
[Tue Oct 18 07:35:19 2011] Writing fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src48.gif
[Tue Oct 18 07:36:35 2011] ../../acisf04129/products/events/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src48_src.evt and ../../acisf04129/products/events/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src48_bgd.evt exist, delete to re-create
[Tue Oct 18 07:36:35 2011] Size of ../../acisf04129/products/events/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src48_src.evt.gz[events] = 55 counts
[Tue Oct 18 07:36:35 2011] Mean chipx,y = (278.38, 323.42)
[Tue Oct 18 07:36:35 2011] Mean tdetx,y = (3384.42, 4853.62)
[Tue Oct 18 07:36:35 2011] chipx,y range = (253.00-300.00, 300.00-351.00)
[Tue Oct 18 07:36:35 2011] Size of ../../acisf04129/products/events/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src48_bgd.evt.gz[events] = 332 counts
[Tue Oct 18 07:36:35 2011] ../../acisf04129/products/images/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src48_src.img and ../../acisf04129/products/images/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src48_bgd.img exist, delete to re-create
[Tue Oct 18 07:36:35 2011] ../../acisf04129/products/spectra/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src48_src.pi and ../../acisf04129/products/spectra/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src48_bgd.pi exist, delete to re-create
[Tue Oct 18 07:36:35 2011] Not generating rmf since there are only 26 counts
[Tue Oct 18 07:36:38 2011] ../../acisf04129/products/lightcurves/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src48_src.lc and ../../acisf04129/products/lightcurves/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src48_bgd.lc exist, delete to re-create
[Tue Oct 18 07:36:58 2011] 168.791
[Tue Oct 18 07:43:44 2011] Updating aperture counts using extracted products
[Tue Oct 18 07:43:44 2011] Error reading totcts from fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src48_src.pi.gz
[Tue Oct 18 07:43:44 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 07:43:44 2011] Using photon index=1.80, rate=0.000163, arf fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src48.arf
[Tue Oct 18 07:43:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 07:43:44 2011] Updating source flux to 2.2e-15
[Tue Oct 18 07:43:54 2011] Source 48 has fewer than 100.000000 counts, skipping spectral fitting