[Tue Oct 18 07:30:44 2011] Detection parameters:
  Position = (994.9, 973.9) = 2 4 41.83 -4 56 37.6
  Extent = 3.2" x 2.3", rotation angle = 120 degrees
  Source counts = 71.0 +/- 10.4
  Background counts = 37.0
  Rate = 0.0004 +/- 6e-05

[Tue Oct 18 07:30:44 2011] Off-axis axis estimate = 8.68'
[Tue Oct 18 07:32:58 2011] Using EEF radius (= 3.33 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:32:58 2011] Initial guess for spatial extent in simple fitting = 3.33"
[Tue Oct 18 07:32:58 2011] source mask rpix=6.8, npix_max = 210, mask sum = 189, frac = 0.896
[Tue Oct 18 07:32:58 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 3.33"
[Tue Oct 18 07:32:59 2011] fullrun_ccd0_acisf04129_pi14-548_cl_pass0_src31.ximg exists
[Tue Oct 18 07:32:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04129_pi14-548_cl_pass0_src31.csv
[Tue Oct 18 07:32:59 2011] fullrun_ccd0_acisf04129_pi14-548_cl_pass0_src31_1.ximg exists
[Tue Oct 18 07:32:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04129_pi14-548_cl_pass0_src31.csv
[Tue Oct 18 07:32:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf04129_pi14-548_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf04129_pi14-548_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:33:00 2011] fullrun_ccd0_acisf04129_pi14-548_cl_pass0_tfrozen_src31.ximg exists
[Tue Oct 18 07:33:00 2011] fullrun_ccd0_acisf04129_pi14-548_cl_pass0_tfrozen_src31_1.ximg exists
[Tue Oct 18 07:33:00 2011] Fit fullrun_ccd0_acisf04129_pi14-548_cl_pass0_tfrozen_src31 appears to have run properly
[Tue Oct 18 07:33:22 2011] Spatial fit model total counts = 161.144000, observed total counts = 160.000000
[Tue Oct 18 07:33:22 2011] Offset between fit and detection position for source 47 = 0.939723 pixels
[Tue Oct 18 07:33:22 2011] 160.495300 total counts/ 82.528900 bgd. counts: snr = 8.582315
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 0.939723 pixels
  Position = (995.8, 973.6) = 2 4 41.82 -4 56 38.0
  Extent = 2.9 (2.4-3.5)", rotation angle = 0
  Source counts = 78.0 +/- 12.7
  Background counts = 82.5
  Rate = 0.0005 +/- 8e-05
[Tue Oct 18 07:33:22 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:33:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:33:22 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:33:22 2011] Source does appear to be extended
[Tue Oct 18 07:33:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:34:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:34:10 2011] Initial guess for spatial extent in simple fitting = 2.90"
[Tue Oct 18 07:34:10 2011] source mask rpix=5.9, npix_max = 163, mask sum = 165, frac = 1.007
[Tue Oct 18 07:34:10 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 2.90"
[Tue Oct 18 07:34:12 2011] fullrun_ccd0_acisf04129_pi14-548_cl_pass1_src26.ximg exists
[Tue Oct 18 07:34:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04129_pi14-548_cl_pass1_src26.csv
[Tue Oct 18 07:34:12 2011] fullrun_ccd0_acisf04129_pi14-548_cl_pass1_src26_1.ximg exists
[Tue Oct 18 07:34:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04129_pi14-548_cl_pass1_src26.csv
[Tue Oct 18 07:34:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf04129_pi14-548_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf04129_pi14-548_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:34:13 2011] fullrun_ccd0_acisf04129_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Tue Oct 18 07:34:13 2011] fullrun_ccd0_acisf04129_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Tue Oct 18 07:34:13 2011] Fit fullrun_ccd0_acisf04129_pi14-548_cl_pass1_tfrozen_src26 appears to have run properly
[Tue Oct 18 07:34:33 2011] Spatial fit model total counts = 140.455000, observed total counts = 139.000000
[Tue Oct 18 07:34:33 2011] Offset between fit and detection position for source 47 = 0.068165 pixels
[Tue Oct 18 07:34:33 2011] 135.404000 total counts/ 54.423900 bgd. counts: snr = 10.976995
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 0.068165 pixels
  Position = (995.8, 973.5) = 2 4 41.82 -4 56 38.0
  Extent = 2.9 (2.2-3.0)", rotation angle = 0
  Source counts = 81.0 +/- 11.6
  Background counts = 54.4
  Rate = 0.0005 +/- 7e-05
[Tue Oct 18 07:34:33 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:34:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:34:33 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:34:33 2011] Source does appear to be extended
[Tue Oct 18 07:34:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:35:19 2011] Not overwriting source region fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src47_src.reg
[Tue Oct 18 07:35:19 2011] Extracting stamp from image fullrun_ccd0_acisf04129_pi14-548_cl_sm2.00.img.gz, (862, 840) - (1129, 1107)
[Tue Oct 18 07:35:19 2011] Writing fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src47.gif
[Tue Oct 18 07:36:33 2011] ../../acisf04129/products/events/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src47_src.evt and ../../acisf04129/products/events/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src47_bgd.evt exist, delete to re-create
[Tue Oct 18 07:36:33 2011] Size of ../../acisf04129/products/events/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src47_src.evt.gz[events] = 126 counts
[Tue Oct 18 07:36:33 2011] Mean chipx,y = (614.56, 127.72)
[Tue Oct 18 07:36:33 2011] Mean tdetx,y = (3188.72, 4517.44)
[Tue Oct 18 07:36:33 2011] chipx,y range = (583.00-648.00, 97.00-164.00)
[Tue Oct 18 07:36:33 2011] Size of ../../acisf04129/products/events/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src47_bgd.evt.gz[events] = 428 counts
[Tue Oct 18 07:36:33 2011] ../../acisf04129/products/images/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src47_src.img and ../../acisf04129/products/images/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src47_bgd.img exist, delete to re-create
[Tue Oct 18 07:36:33 2011] ../../acisf04129/products/spectra/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src47_src.pi and ../../acisf04129/products/spectra/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src47_bgd.pi exist, delete to re-create
[Tue Oct 18 07:36:33 2011] Not generating rmf since there are only 80 counts
[Tue Oct 18 07:36:35 2011] ../../acisf04129/products/lightcurves/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src47_src.lc and ../../acisf04129/products/lightcurves/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src47_bgd.lc exist, delete to re-create
[Tue Oct 18 07:36:58 2011] 165.693
[Tue Oct 18 07:43:44 2011] Updating aperture counts using extracted products
[Tue Oct 18 07:43:44 2011] Error reading totcts from fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src47_src.pi.gz
[Tue Oct 18 07:43:44 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 07:43:44 2011] Using photon index=1.80, rate=0.000506, arf fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src47.arf
[Tue Oct 18 07:43:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 07:43:44 2011] Updating source flux to 6.8e-15
[Tue Oct 18 07:43:54 2011] Source 47 has fewer than 100.000000 counts, skipping spectral fitting