[Tue Oct 18 07:30:42 2011] Detection parameters:
  Position = (855.2, 327.3) = 2 4 46.43 -5 1 55.7
  Extent = 0.6" x 0.5", rotation angle = 119 degrees
  Source counts = 371.7 +/- 19.5
  Background counts = 7.3
  Rate = 0.002 +/- 0.0001

[Tue Oct 18 07:30:44 2011] Off-axis axis estimate = 3.41'
[Tue Oct 18 07:32:58 2011] Using EEF radius (= 0.67 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:32:58 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Tue Oct 18 07:32:58 2011] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.154
[Tue Oct 18 07:32:58 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.67"
[Tue Oct 18 07:32:59 2011] fullrun_ccd0_acisf04129_pi14-548_cl_pass0_src6.ximg exists
[Tue Oct 18 07:32:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04129_pi14-548_cl_pass0_src6.csv
[Tue Oct 18 07:32:59 2011] fullrun_ccd0_acisf04129_pi14-548_cl_pass0_src6_1.ximg exists
[Tue Oct 18 07:32:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04129_pi14-548_cl_pass0_src6.csv
[Tue Oct 18 07:32:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf04129_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf04129_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:33:00 2011] fullrun_ccd0_acisf04129_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Tue Oct 18 07:33:00 2011] fullrun_ccd0_acisf04129_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Oct 18 07:33:00 2011] Fit fullrun_ccd0_acisf04129_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Tue Oct 18 07:33:22 2011] Spatial fit model total counts = 381.559000, observed total counts = 382.000000
[Tue Oct 18 07:33:22 2011] Offset between fit and detection position for source 14 = 0.685373 pixels
[Tue Oct 18 07:33:22 2011] 381.576400 total counts/ 19.767400 bgd. counts: snr = 81.377546
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.685373 pixels
  Position = (855.7, 327.8) = 2 4 46.43 -5 1 55.8
  Extent = 0.7 (0.7-0.8)", rotation angle = 0
  Source counts = 361.8 +/- 19.5
  Background counts = 19.8
  Rate = 0.002 +/- 0.0001
[Tue Oct 18 07:33:22 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:33:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:33:22 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:33:22 2011] Source does appear to be extended
[Tue Oct 18 07:33:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:34:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:34:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 18 07:34:10 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Tue Oct 18 07:34:10 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.068
[Tue Oct 18 07:34:10 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.71"
[Tue Oct 18 07:34:12 2011] fullrun_ccd0_acisf04129_pi14-548_cl_pass1_src6.ximg exists
[Tue Oct 18 07:34:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04129_pi14-548_cl_pass1_src6.csv
[Tue Oct 18 07:34:12 2011] fullrun_ccd0_acisf04129_pi14-548_cl_pass1_src6_1.ximg exists
[Tue Oct 18 07:34:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04129_pi14-548_cl_pass1_src6.csv
[Tue Oct 18 07:34:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf04129_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf04129_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:34:12 2011] fullrun_ccd0_acisf04129_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Tue Oct 18 07:34:12 2011] fullrun_ccd0_acisf04129_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Oct 18 07:34:12 2011] Fit fullrun_ccd0_acisf04129_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Tue Oct 18 07:34:33 2011] Spatial fit model total counts = 379.978000, observed total counts = 382.000000
[Tue Oct 18 07:34:33 2011] Offset between fit and detection position for source 14 = 0.011007 pixels
[Tue Oct 18 07:34:33 2011] 380.241400 total counts/ 19.975400 bgd. counts: snr = 80.607515
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.011007 pixels
  Position = (855.7, 327.8) = 2 4 46.43 -5 1 55.7
  Extent = 0.7 (0.7-0.8)", rotation angle = 0
  Source counts = 360.3 +/- 19.5
  Background counts = 20.0
  Rate = 0.002 +/- 0.0001
[Tue Oct 18 07:34:33 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:34:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:34:33 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:34:33 2011] Source does appear to be extended
[Tue Oct 18 07:34:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:35:18 2011] Not overwriting source region fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src14_src.reg
[Tue Oct 18 07:35:18 2011] Extracting stamp from image fullrun_ccd0_acisf04129_pi14-548_cl_sm2.00.img.gz, (823, 295) - (888, 360)
[Tue Oct 18 07:35:19 2011] Writing fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src14.gif
[Tue Oct 18 07:35:37 2011] ../../acisf04129/products/events/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src14_src.evt and ../../acisf04129/products/events/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Tue Oct 18 07:35:37 2011] Size of ../../acisf04129/products/events/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src14_src.evt.gz[events] = 374 counts
[Tue Oct 18 07:35:37 2011] Mean chipx,y = (833.58, 752.47)
[Tue Oct 18 07:35:37 2011] Mean tdetx,y = (3813.47, 4298.42)
[Tue Oct 18 07:35:37 2011] chipx,y range = (814.00-853.00, 732.00-772.00)
[Tue Oct 18 07:35:37 2011] Size of ../../acisf04129/products/events/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 35 counts
[Tue Oct 18 07:35:37 2011] ../../acisf04129/products/images/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src14_src.img and ../../acisf04129/products/images/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Tue Oct 18 07:35:37 2011] ../../acisf04129/products/spectra/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src14_src.pi and ../../acisf04129/products/spectra/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src14_bgd.pi exist, delete to re-create
[Tue Oct 18 07:35:43 2011] ../../acisf04129/products/lightcurves/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src14_src.lc and ../../acisf04129/products/lightcurves/fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Tue Oct 18 07:36:58 2011] Keeping rmf generated by specextract
[Tue Oct 18 07:36:58 2011] 197.778
[Tue Oct 18 07:43:44 2011] Updating aperture counts using extracted products
[Tue Oct 18 07:43:44 2011] Error reading totcts from fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src14_src.pi.gz
[Tue Oct 18 07:43:44 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 07:43:44 2011] Using photon index=1.80, rate=0.00225, arf fullrun_ccd0_acisf04129_pi14-548_pass1_cl_src14.arf
[Tue Oct 18 07:43:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 07:43:44 2011] Updating source flux to 2.5e-14