[Tue Oct 25 14:23:43 2011] Detection parameters:
  Position = (547.3, 535.4) = 11 21 2.33 53 10 7.0
  Extent = 0.6" x 0.5", rotation angle = 55 degrees
  Source counts = 60.7 +/- 9.4
  Background counts = 28.3
  Rate = 0.0007 +/- 0.0001

[Tue Oct 25 14:23:45 2011] Off-axis axis estimate = 2.30'
[Tue Oct 25 14:25:02 2011] Using EEF radius (= 0.46 ")to estimate initial spatial extent for simple fitting
[Tue Oct 25 14:25:02 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Tue Oct 25 14:25:02 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.078
[Tue Oct 25 14:25:02 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 0.46"
[Tue Oct 25 14:25:05 2011] fullrun_ccd7_acisf03951_pi14-548_cl_pass0_src28.ximg exists
[Tue Oct 25 14:25:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03951_pi14-548_cl_pass0_src28.csv
[Tue Oct 25 14:25:05 2011] fullrun_ccd7_acisf03951_pi14-548_cl_pass0_src28_1.ximg exists
[Tue Oct 25 14:25:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03951_pi14-548_cl_pass0_src28.csv
[Tue Oct 25 14:25:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03951_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03951_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 25 14:25:06 2011] fullrun_ccd7_acisf03951_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Tue Oct 25 14:25:06 2011] fullrun_ccd7_acisf03951_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Tue Oct 25 14:25:06 2011] Fit fullrun_ccd7_acisf03951_pi14-548_cl_pass0_tfrozen_src28 appears to have run properly
[Tue Oct 25 14:25:32 2011] Spatial fit model total counts = 138.913000, observed total counts = 141.000000
[Tue Oct 25 14:25:32 2011] Offset between fit and detection position for source 50 = 0.206788 pixels
[Tue Oct 25 14:25:32 2011] 139.959400 total counts/ 107.792000 bgd. counts: snr = 3.098294
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 0.206788 pixels
  Position = (547.4, 535.2) = 11 21 2.35 53 10 6.6
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 32.2 +/- 11.8
  Background counts = 107.8
  Rate = 0.0004 +/- 0.0001
[Tue Oct 25 14:25:32 2011] Vigneting correction estimate = 1.000000
[Tue Oct 25 14:25:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 25 14:25:32 2011] Assessing source extent using major axis lower bound
[Tue Oct 25 14:25:32 2011] Source does appear to be extended
[Tue Oct 25 14:25:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 25 14:26:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 25 14:26:01 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Tue Oct 25 14:26:01 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.120
[Tue Oct 25 14:26:01 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 0.45"
[Tue Oct 25 14:26:04 2011] fullrun_ccd7_acisf03951_pi14-548_cl_pass1_src28.ximg exists
[Tue Oct 25 14:26:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03951_pi14-548_cl_pass1_src28.csv
[Tue Oct 25 14:26:04 2011] fullrun_ccd7_acisf03951_pi14-548_cl_pass1_src28_1.ximg exists
[Tue Oct 25 14:26:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03951_pi14-548_cl_pass1_src28.csv
[Tue Oct 25 14:26:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03951_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03951_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 25 14:26:06 2011] fullrun_ccd7_acisf03951_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Tue Oct 25 14:26:06 2011] fullrun_ccd7_acisf03951_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Tue Oct 25 14:26:06 2011] Fit fullrun_ccd7_acisf03951_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly
[Tue Oct 25 14:26:29 2011] Spatial fit model total counts = 140.448000, observed total counts = 141.000000
[Tue Oct 25 14:26:29 2011] Offset between fit and detection position for source 50 = 0.012676 pixels
[Tue Oct 25 14:26:29 2011] 141.532900 total counts/ 109.881000 bgd. counts: snr = 3.019524
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 0.012676 pixels
  Position = (547.3, 535.2) = 11 21 2.35 53 10 6.6
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 31.7 +/- 11.9
  Background counts = 109.9
  Rate = 0.0004 +/- 0.0001
[Tue Oct 25 14:26:29 2011] Vigneting correction estimate = 1.000000
[Tue Oct 25 14:26:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 25 14:26:29 2011] Assessing source extent using major axis lower bound
[Tue Oct 25 14:26:29 2011] Source does appear to be extended
[Tue Oct 25 14:26:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 25 14:35:07 2011] Not overwriting source region fullrun_ccd7_acisf03951_pi14-548_pass1_cl_src50_src.reg
[Tue Oct 25 14:35:07 2011] Extracting stamp from image fullrun_ccd7_acisf03951_pi14-548_cl_sm2.00.img.gz, (527, 515) - (568, 556)
[Tue Oct 25 14:35:07 2011] Writing fullrun_ccd7_acisf03951_pi14-548_pass1_cl_src50.gif
[Tue Oct 25 14:38:29 2011] ../../acisf03951/products/events/fullrun_ccd7_acisf03951_pi14-548_pass1_cl_src50_src.evt and ../../acisf03951/products/events/fullrun_ccd7_acisf03951_pi14-548_pass1_cl_src50_bgd.evt exist, delete to re-create
[Tue Oct 25 14:38:29 2011] Size of ../../acisf03951/products/events/fullrun_ccd7_acisf03951_pi14-548_pass1_cl_src50_src.evt.gz[events] = 50 counts
[Tue Oct 25 14:38:29 2011] Mean chipx,y = (486.32, 503.94)
[Tue Oct 25 14:38:29 2011] Mean tdetx,y = (4403.32, 2205.94)
[Tue Oct 25 14:38:29 2011] chipx,y range = (467.00-504.00, 485.00-522.00)
[Tue Oct 25 14:38:29 2011] Size of ../../acisf03951/products/events/fullrun_ccd7_acisf03951_pi14-548_pass1_cl_src50_bgd.evt.gz[events] = 159 counts
[Tue Oct 25 14:38:29 2011] ../../acisf03951/products/images/fullrun_ccd7_acisf03951_pi14-548_pass1_cl_src50_src.img and ../../acisf03951/products/images/fullrun_ccd7_acisf03951_pi14-548_pass1_cl_src50_bgd.img exist, delete to re-create
[Tue Oct 25 14:38:29 2011] Not generating rmf since there are only 31 counts
[Tue Oct 25 14:38:29 2011] arf not found, will run specextract
[Tue Oct 25 14:38:31 2011] ../../acisf03951/products/spectra/fullrun_ccd7_acisf03951_pi14-548_pass1_cl_src50_bkg.pi not found
[Tue Oct 25 14:38:31 2011] ../../acisf03951/products/spectra/fullrun_ccd7_acisf03951_pi14-548_pass1_cl_src50.warf not found
[Tue Oct 25 14:38:31 2011] ../../acisf03951/products/spectra/fullrun_ccd7_acisf03951_pi14-548_pass1_cl_src50.wrmf not found
[Tue Oct 25 14:38:31 2011] Removal of ../../acisf03951/products/spectra/fullrun_ccd7_acisf03951_pi14-548_pass1_cl_src50.soff failed
[Tue Oct 25 14:38:31 2011] Failed to rename ../../acisf03951/products/spectra/fullrun_ccd7_acisf03951_pi14-548_pass1_cl_src50_grp.pi to ../../acisf03951/products/spectra/fullrun_ccd7_acisf03951_pi14-548_pass1_cl_src50_src.pi
[Tue Oct 25 14:38:36 2011] ../../acisf03951/products/lightcurves/fullrun_ccd7_acisf03951_pi14-548_pass1_cl_src50_src.lc and ../../acisf03951/products/lightcurves/fullrun_ccd7_acisf03951_pi14-548_pass1_cl_src50_bgd.lc exist, delete to re-create
[Tue Oct 25 14:43:45 2011] No arf file found
[Tue Oct 25 14:43:51 2011] Updating aperture counts using extracted products
[Tue Oct 25 14:43:51 2011] Error reading totcts from fullrun_ccd7_acisf03951_pi14-548_pass1_cl_src50_src.pi
[Tue Oct 25 14:43:51 2011] No arf file for this source, not re-computing flux
[Tue Oct 25 14:44:02 2011] Source 50 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Oct 25 14:44:03 2011] acisf03951/analysis//spectral/fullrun_ccd7_acisf03951_pi14-548_pass1_cl_src50_pl.csv not found, spectral fit skipped or did not complete