[Sat Oct  1 02:52:27 2011] Detection parameters:
  Position = (1046.9, 744.7) = 12 36 3.54 26 0 23.5
  Extent = 0.6" x 0.6", rotation angle = 119 degrees
  Source counts = 17.6 +/- 4.6
  Background counts = 3.4
  Rate = 0.0003 +/- 8e-05

[Sat Oct  1 02:52:27 2011] Off-axis axis estimate = 3.92'
[Sat Oct  1 02:53:45 2011] Using EEF radius (= 0.81 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 02:53:45 2011] Initial guess for spatial extent in simple fitting = 0.81"
[Sat Oct  1 02:53:45 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.874
[Sat Oct  1 02:53:45 2011] Giving source the simple spatial ID 50 for pass 0, mean size = 0.81"
[Sat Oct  1 02:53:48 2011] fullrun_ccd7_acisf03950_pi14-548_cl_pass0_src50.ximg exists
[Sat Oct  1 02:53:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03950_pi14-548_cl_pass0_src50.csv
[Sat Oct  1 02:53:49 2011] fullrun_ccd7_acisf03950_pi14-548_cl_pass0_src50_1.ximg exists
[Sat Oct  1 02:53:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03950_pi14-548_cl_pass0_src50.csv
[Sat Oct  1 02:53:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03950_pi14-548_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03950_pi14-548_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 02:53:51 2011] fullrun_ccd7_acisf03950_pi14-548_cl_pass0_tfrozen_src50.ximg exists
[Sat Oct  1 02:53:51 2011] fullrun_ccd7_acisf03950_pi14-548_cl_pass0_tfrozen_src50_1.ximg exists
[Sat Oct  1 02:53:51 2011] Fit fullrun_ccd7_acisf03950_pi14-548_cl_pass0_tfrozen_src50 appears to have run properly
[Sat Oct  1 02:54:20 2011] Spatial fit model total counts = 23.835000, observed total counts = 24.000000
[Sat Oct  1 02:54:20 2011] Offset between fit and detection position for source 80 = 0.846751 pixels
[Sat Oct  1 02:54:20 2011] 24.389940 total counts/ 6.704840 bgd. counts: snr = 6.829884
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 0.846751 pixels
  Position = (1047.5, 745.2) = 12 36 3.53 26 0 23.5
  Extent = 0.9 (0.6-1.3)", rotation angle = 0
  Source counts = 17.7 +/- 4.9
  Background counts = 6.7
  Rate = 0.0003 +/- 8e-05
[Sat Oct  1 02:54:20 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 02:54:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 02:54:20 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 02:54:20 2011] Source does appear to be extended
[Sat Oct  1 02:54:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 02:55:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  1 02:55:11 2011] Initial guess for spatial extent in simple fitting = 0.95"
[Sat Oct  1 02:55:11 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.062
[Sat Oct  1 02:55:11 2011] Giving source the simple spatial ID 50 for pass 1, mean size = 0.95"
[Sat Oct  1 02:55:18 2011] fullrun_ccd7_acisf03950_pi14-548_cl_pass1_src50.ximg exists
[Sat Oct  1 02:55:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03950_pi14-548_cl_pass1_src50.csv
[Sat Oct  1 02:55:18 2011] fullrun_ccd7_acisf03950_pi14-548_cl_pass1_src50_1.ximg exists
[Sat Oct  1 02:55:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03950_pi14-548_cl_pass1_src50.csv
[Sat Oct  1 02:55:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03950_pi14-548_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03950_pi14-548_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 02:55:20 2011] fullrun_ccd7_acisf03950_pi14-548_cl_pass1_tfrozen_src50.ximg exists
[Sat Oct  1 02:55:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03950_pi14-548_cl_pass1_tfrozen_src50.csv
[Sat Oct  1 02:55:20 2011] fullrun_ccd7_acisf03950_pi14-548_cl_pass1_tfrozen_src50_1.ximg exists
[Sat Oct  1 02:55:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03950_pi14-548_cl_pass1_tfrozen_src50.csv
[Sat Oct  1 02:55:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03950_pi14-548_cl_pass1_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03950_pi14-548_cl_pass1_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 02:55:49 2011] Spatial fit model total counts = 17.765100, observed total counts = 24.000000
[Sat Oct  1 02:55:49 2011] Poor agreement between spatial fit and data for source 80
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Oct  1 02:55:49 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 02:55:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 02:55:49 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 02:55:49 2011] Source does appear to be extended
[Sat Oct  1 02:55:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 03:01:52 2011] Not overwriting source region fullrun_ccd7_acisf03950_pi14-548_pass1_cl_src80_src.reg
[Sat Oct  1 03:01:52 2011] Extracting stamp from image fullrun_ccd7_acisf03950_pi14-548_cl_sm2.00.img.gz, (1004, 702) - (1091, 789)
[Sat Oct  1 03:01:52 2011] Writing fullrun_ccd7_acisf03950_pi14-548_pass1_cl_src80.gif
[Sat Oct  1 03:08:19 2011] ../../acisf03950/products/events/fullrun_ccd7_acisf03950_pi14-548_pass1_cl_src80_src.evt and ../../acisf03950/products/events/fullrun_ccd7_acisf03950_pi14-548_pass1_cl_src80_bgd.evt exist, delete to re-create
[Sat Oct  1 03:08:19 2011] Size of ../../acisf03950/products/events/fullrun_ccd7_acisf03950_pi14-548_pass1_cl_src80_src.evt.gz[events] = 22 counts
[Sat Oct  1 03:08:19 2011] Mean chipx,y = (285.32, 40.27)
[Sat Oct  1 03:08:19 2011] Mean tdetx,y = (4202.32, 1742.27)
[Sat Oct  1 03:08:19 2011] chipx,y range = (271.00-305.00, 23.00-59.00)
[Sat Oct  1 03:08:19 2011] Size of ../../acisf03950/products/events/fullrun_ccd7_acisf03950_pi14-548_pass1_cl_src80_bgd.evt.gz[events] = 47 counts
[Sat Oct  1 03:08:19 2011] ../../acisf03950/products/images/fullrun_ccd7_acisf03950_pi14-548_pass1_cl_src80_src.img and ../../acisf03950/products/images/fullrun_ccd7_acisf03950_pi14-548_pass1_cl_src80_bgd.img exist, delete to re-create
[Sat Oct  1 03:08:19 2011] Not generating rmf since there are only 17 counts
[Sat Oct  1 03:08:19 2011] arf not found, will run specextract
[Sat Oct  1 03:08:21 2011] ../../acisf03950/products/spectra/fullrun_ccd7_acisf03950_pi14-548_pass1_cl_src80_bkg.pi not found
[Sat Oct  1 03:08:21 2011] ../../acisf03950/products/spectra/fullrun_ccd7_acisf03950_pi14-548_pass1_cl_src80.warf not found
[Sat Oct  1 03:08:21 2011] ../../acisf03950/products/spectra/fullrun_ccd7_acisf03950_pi14-548_pass1_cl_src80.wrmf not found
[Sat Oct  1 03:08:21 2011] Removal of ../../acisf03950/products/spectra/fullrun_ccd7_acisf03950_pi14-548_pass1_cl_src80.soff failed
[Sat Oct  1 03:08:21 2011] Failed to rename ../../acisf03950/products/spectra/fullrun_ccd7_acisf03950_pi14-548_pass1_cl_src80_grp.pi to ../../acisf03950/products/spectra/fullrun_ccd7_acisf03950_pi14-548_pass1_cl_src80_src.pi
[Sat Oct  1 03:08:26 2011] ../../acisf03950/products/lightcurves/fullrun_ccd7_acisf03950_pi14-548_pass1_cl_src80_src.lc and ../../acisf03950/products/lightcurves/fullrun_ccd7_acisf03950_pi14-548_pass1_cl_src80_bgd.lc exist, delete to re-create
[Sat Oct  1 03:13:00 2011] No arf file found
[Sat Oct  1 03:13:06 2011] Updating aperture counts using extracted products
[Sat Oct  1 03:13:06 2011] Error reading totcts from fullrun_ccd7_acisf03950_pi14-548_pass1_cl_src80_src.pi
[Sat Oct  1 03:13:06 2011] No arf file for this source, not re-computing flux
[Sat Oct  1 03:13:17 2011] Flag p found in src. 80 procflags, skipping spectral fitting
[Sat Oct  1 03:13:17 2011] Source 80 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct  1 03:13:18 2011] acisf03950/analysis//spectral/fullrun_ccd7_acisf03950_pi14-548_pass1_cl_src80_pl.csv not found, spectral fit skipped or did not complete