[Sun Apr 29 00:48:20 2012] Detection parameters:
  Position = (748.3, 61.6) = 4 54 4.72 -53 19 1.3
  Extent = 0.5" x 0.5", rotation angle = 98 degrees
  Source counts = 46.7 +/- 6.9
  Background counts = 1.3
  Rate = 0.0008 +/- 0.0001

[Sun Apr 29 00:48:22 2012] Off-axis axis estimate = 2.55'
[Sun Apr 29 02:15:49 2012] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 02:15:49 2012] Initial guess for spatial extent in simple fitting = 0.50"
[Sun Apr 29 02:15:49 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.979
[Sun Apr 29 02:15:49 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 0.50"
[Sun Apr 29 02:40:09 2012] fullrun_ccd6_acisf03930_pi14-548_cl_pass0_src9.ximg exists
[Sun Apr 29 02:40:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03930_pi14-548_cl_pass0_src9.csv
[Sun Apr 29 02:40:09 2012] fullrun_ccd6_acisf03930_pi14-548_cl_pass0_src9_1.ximg exists
[Sun Apr 29 02:40:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03930_pi14-548_cl_pass0_src9.csv
[Sun Apr 29 02:40:09 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf03930_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf03930_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 02:40:09 2012] fullrun_ccd6_acisf03930_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Sun Apr 29 02:40:09 2012] fullrun_ccd6_acisf03930_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Apr 29 02:40:09 2012] Fit fullrun_ccd6_acisf03930_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Apr 29 03:10:29 2012] Spatial fit model total counts = 53.980600, observed total counts = 54.000000
[Sun Apr 29 03:10:29 2012] Offset between fit and detection position for source 3 = 0.425188 pixels
[Sun Apr 29 03:10:29 2012] 53.633730 total counts/ 2.497430 bgd. counts: snr = 32.358072
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.425188 pixels
  Position = (748.7, 61.7) = 4 54 4.72 -53 19 1.5
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 51.1 +/- 7.3
  Background counts = 2.5
  Rate = 0.0009 +/- 0.0001
[Sun Apr 29 03:10:29 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 03:10:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 03:10:29 2012] Assessing source extent using major axis lower bound
[Sun Apr 29 03:10:29 2012] Source does appear to be extended
[Sun Apr 29 03:10:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr 29 04:24:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Apr 29 04:24:19 2012] Initial guess for spatial extent in simple fitting = 0.59"
[Sun Apr 29 04:24:19 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.777
[Sun Apr 29 04:24:19 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 0.59"
[Sun Apr 29 04:45:29 2012] fullrun_ccd6_acisf03930_pi14-548_cl_pass1_src9.ximg exists
[Sun Apr 29 04:45:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03930_pi14-548_cl_pass1_src9.csv
[Sun Apr 29 04:45:29 2012] fullrun_ccd6_acisf03930_pi14-548_cl_pass1_src9_1.ximg exists
[Sun Apr 29 04:45:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03930_pi14-548_cl_pass1_src9.csv
[Sun Apr 29 04:45:29 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf03930_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf03930_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 04:45:29 2012] fullrun_ccd6_acisf03930_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Sun Apr 29 04:45:29 2012] fullrun_ccd6_acisf03930_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Apr 29 04:45:29 2012] Fit fullrun_ccd6_acisf03930_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Apr 29 05:14:44 2012] Spatial fit model total counts = 52.273800, observed total counts = 54.000000
[Sun Apr 29 05:14:44 2012] Offset between fit and detection position for source 3 = 0.014956 pixels
[Sun Apr 29 05:14:44 2012] 51.464631 total counts/ 0.021431 bgd. counts: snr = 351.406506
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.014956 pixels
  Position = (748.7, 61.8) = 4 54 4.72 -53 19 1.5
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 51.4 +/- 7.2
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0001
[Sun Apr 29 05:14:44 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 05:14:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 05:14:44 2012] Assessing source extent using major axis lower bound
[Sun Apr 29 05:14:44 2012] Source does appear to be extended
[Sun Apr 29 05:14:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr 29 05:18:09 2012] Writing source region out to fullrun_ccd6_acisf03930_pi14-548_pass1_cl_src3_src.reg
[Sun Apr 29 05:18:09 2012] Extracting stamp from image fullrun_ccd6_acisf03930_pi14-548_cl_sm2.00.img.gz, (721, 34) - (777, 90)
[Sun Apr 29 05:18:09 2012] Writing fullrun_ccd6_acisf03930_pi14-548_pass1_cl_src3.gif
[Sun Apr 29 05:19:35 2012] Size of ../../acisf03930/products/events/fullrun_ccd6_acisf03930_pi14-548_pass1_cl_src3_src.evt.gz[events] = 52 counts
[Sun Apr 29 05:19:35 2012] Mean chipx,y = (1006.73, 322.29)
[Sun Apr 29 05:19:35 2012] Mean tdetx,y = (3881.73, 2024.29)
[Sun Apr 29 05:19:35 2012] chipx,y range = (988.00-1023.00, 307.00-342.00)
[Sun Apr 29 05:19:35 2012] Size of ../../acisf03930/products/events/fullrun_ccd6_acisf03930_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 8 counts
[Sun Apr 29 05:19:37 2012] Not generating rmf since there are only 51 counts
[Sun Apr 29 05:19:37 2012] arf not found, will run specextract
[Sun Apr 29 05:19:38 2012] ../../acisf03930/products/spectra/fullrun_ccd6_acisf03930_pi14-548_pass1_cl_src3_bkg.pi not found
[Sun Apr 29 05:19:38 2012] ../../acisf03930/products/spectra/fullrun_ccd6_acisf03930_pi14-548_pass1_cl_src3.warf not found
[Sun Apr 29 05:19:38 2012] ../../acisf03930/products/spectra/fullrun_ccd6_acisf03930_pi14-548_pass1_cl_src3.wrmf not found
[Sun Apr 29 05:19:38 2012] Removal of ../../acisf03930/products/spectra/fullrun_ccd6_acisf03930_pi14-548_pass1_cl_src3.soff failed
[Sun Apr 29 05:19:38 2012] Failed to rename ../../acisf03930/products/spectra/fullrun_ccd6_acisf03930_pi14-548_pass1_cl_src3_grp.pi to ../../acisf03930/products/spectra/fullrun_ccd6_acisf03930_pi14-548_pass1_cl_src3_src.pi
[Sun Apr 29 05:22:36 2012] No arf file found
[Sun Apr 29 05:27:17 2012] Updating aperture counts using extracted products
[Sun Apr 29 05:27:17 2012] Error reading totcts from fullrun_ccd6_acisf03930_pi14-548_pass1_cl_src3_src.pi
[Sun Apr 29 05:27:18 2012] No arf file for this source, not re-computing flux
[Sun Apr 29 05:27:24 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Apr 29 05:27:25 2012] acisf03930/analysis//spectral/fullrun_ccd6_acisf03930_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete