[Wed Oct  5 19:06:24 2011] Detection parameters:
  Position = (768.1, 588.0) = 14 44 46.54 1 51 40.6
  Extent = 1.6" x 1.0", rotation angle = 45 degrees
  Source counts = 24.8 +/- 5.3
  Background counts = 3.2
  Rate = 0.0007 +/- 0.0001

[Wed Oct  5 19:06:25 2011] Off-axis axis estimate = 6.36'
[Wed Oct  5 19:07:27 2011] Using EEF radius (= 1.82 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 19:07:27 2011] Initial guess for spatial extent in simple fitting = 1.82"
[Wed Oct  5 19:07:27 2011] source mask rpix=3.7, npix_max = 70, mask sum = 64, frac = 0.911
[Wed Oct  5 19:07:27 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 1.82"
[Wed Oct  5 19:07:27 2011] fullrun_ccd3_acisf03929_pi14-548_cl_pass0_src11.ximg exists
[Wed Oct  5 19:07:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03929_pi14-548_cl_pass0_src11.csv
[Wed Oct  5 19:07:27 2011] fullrun_ccd3_acisf03929_pi14-548_cl_pass0_src11_1.ximg exists
[Wed Oct  5 19:07:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03929_pi14-548_cl_pass0_src11.csv
[Wed Oct  5 19:07:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03929_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03929_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 19:07:28 2011] fullrun_ccd3_acisf03929_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Wed Oct  5 19:07:28 2011] fullrun_ccd3_acisf03929_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Oct  5 19:07:28 2011] Fit fullrun_ccd3_acisf03929_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Oct  5 19:07:43 2011] Spatial fit model total counts = 28.580200, observed total counts = 28.000000
[Wed Oct  5 19:07:43 2011] Offset between fit and detection position for source 31 = 1.262304 pixels
[Wed Oct  5 19:07:43 2011] 28.531730 total counts/ 6.068130 bgd. counts: snr = 9.119099
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 1.262304 pixels
  Position = (768.5, 589.1) = 14 44 46.54 1 51 40.9
  Extent = 1.2 (0.9-1.6)", rotation angle = 0
  Source counts = 22.5 +/- 5.3
  Background counts = 6.1
  Rate = 0.0006 +/- 0.0001
[Wed Oct  5 19:07:43 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 19:07:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 19:07:43 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 19:07:43 2011] Source does appear to be extended
[Wed Oct  5 19:07:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 19:08:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 19:08:18 2011] Initial guess for spatial extent in simple fitting = 1.20"
[Wed Oct  5 19:08:18 2011] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.873
[Wed Oct  5 19:08:18 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 1.20"
[Wed Oct  5 19:08:19 2011] fullrun_ccd3_acisf03929_pi14-548_cl_pass1_src11.ximg exists
[Wed Oct  5 19:08:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03929_pi14-548_cl_pass1_src11.csv
[Wed Oct  5 19:08:19 2011] fullrun_ccd3_acisf03929_pi14-548_cl_pass1_src11_1.ximg exists
[Wed Oct  5 19:08:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03929_pi14-548_cl_pass1_src11.csv
[Wed Oct  5 19:08:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03929_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03929_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 19:08:21 2011] fullrun_ccd3_acisf03929_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Wed Oct  5 19:08:21 2011] fullrun_ccd3_acisf03929_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Oct  5 19:08:21 2011] Fit fullrun_ccd3_acisf03929_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Wed Oct  5 19:08:44 2011] Spatial fit model total counts = 23.920100, observed total counts = 25.000000
[Wed Oct  5 19:08:44 2011] Offset between fit and detection position for source 31 = 0.397417 pixels
[Wed Oct  5 19:08:44 2011] 23.349575 total counts/ 0.001775 bgd. counts: snr = 554.101461
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.397417 pixels
  Position = (768.7, 589.5) = 14 44 46.53 1 51 41.1
  Extent = 1.3 (0.7-1.5)", rotation angle = 0
  Source counts = 23.3 +/- 4.8
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Wed Oct  5 19:08:44 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 19:08:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 19:08:44 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 19:08:44 2011] Source does appear to be extended
[Wed Oct  5 19:08:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 19:15:23 2011] Not overwriting source region fullrun_ccd3_acisf03929_pi14-548_pass1_cl_src31_src.reg
[Wed Oct  5 19:15:23 2011] Extracting stamp from image fullrun_ccd3_acisf03929_pi14-548_cl_sm2.00.img.gz, (711, 532) - (826, 647)
[Wed Oct  5 19:15:23 2011] Writing fullrun_ccd3_acisf03929_pi14-548_pass1_cl_src31.gif
[Wed Oct  5 19:16:05 2011] ../../acisf03929/products/events/fullrun_ccd3_acisf03929_pi14-548_pass1_cl_src31_src.evt and ../../acisf03929/products/events/fullrun_ccd3_acisf03929_pi14-548_pass1_cl_src31_bgd.evt exist, delete to re-create
[Wed Oct  5 19:16:05 2011] Size of ../../acisf03929/products/events/fullrun_ccd3_acisf03929_pi14-548_pass1_cl_src31_src.evt.gz[events] = 26 counts
[Wed Oct  5 19:16:05 2011] Mean chipx,y = (403.42, 470.88)
[Wed Oct  5 19:16:05 2011] Mean tdetx,y = (4661.12, 3464.42)
[Wed Oct  5 19:16:05 2011] chipx,y range = (385.00-418.00, 448.00-492.00)
[Wed Oct  5 19:16:05 2011] Size of ../../acisf03929/products/events/fullrun_ccd3_acisf03929_pi14-548_pass1_cl_src31_bgd.evt.gz[events] = 31 counts
[Wed Oct  5 19:16:05 2011] ../../acisf03929/products/images/fullrun_ccd3_acisf03929_pi14-548_pass1_cl_src31_src.img and ../../acisf03929/products/images/fullrun_ccd3_acisf03929_pi14-548_pass1_cl_src31_bgd.img exist, delete to re-create
[Wed Oct  5 19:16:05 2011] ../../acisf03929/products/spectra/fullrun_ccd3_acisf03929_pi14-548_pass1_cl_src31_src.pi and ../../acisf03929/products/spectra/fullrun_ccd3_acisf03929_pi14-548_pass1_cl_src31_bgd.pi exist, delete to re-create
[Wed Oct  5 19:16:05 2011] Not generating rmf since there are only 23 counts
[Wed Oct  5 19:16:08 2011] ../../acisf03929/products/lightcurves/fullrun_ccd3_acisf03929_pi14-548_pass1_cl_src31_src.lc and ../../acisf03929/products/lightcurves/fullrun_ccd3_acisf03929_pi14-548_pass1_cl_src31_bgd.lc exist, delete to re-create
[Wed Oct  5 19:18:56 2011] 176.698
[Wed Oct  5 19:19:16 2011] Updating aperture counts using extracted products
[Wed Oct  5 19:19:16 2011] Error reading totcts from fullrun_ccd3_acisf03929_pi14-548_pass1_cl_src31_src.pi.gz
[Wed Oct  5 19:19:16 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 19:19:16 2011] Using photon index=1.80, rate=0.000634, arf fullrun_ccd3_acisf03929_pi14-548_pass1_cl_src31.arf
[Wed Oct  5 19:19:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 19:19:16 2011] Updating source flux to 8e-15
[Wed Oct  5 19:19:42 2011] Source 31 has fewer than 100.000000 counts, skipping spectral fitting