[Wed Oct  5 19:06:17 2011] Detection parameters:
  Position = (719.1, 121.7) = 14 45 3.77 1 59 14.1
  Extent = 0.6" x 0.5", rotation angle = 124 degrees
  Source counts = 24.5 +/- 5.0
  Background counts = 0.5
  Rate = 0.0007 +/- 0.0001

[Wed Oct  5 19:06:17 2011] Off-axis axis estimate = 2.57'
[Wed Oct  5 19:07:23 2011] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 19:07:23 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Wed Oct  5 19:07:23 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.969
[Wed Oct  5 19:07:23 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 0.50"
[Wed Oct  5 19:07:23 2011] fullrun_ccd0_acisf03929_pi14-548_cl_pass0_src18.ximg exists
[Wed Oct  5 19:07:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf03929_pi14-548_cl_pass0_src18.csv
[Wed Oct  5 19:07:24 2011] fullrun_ccd0_acisf03929_pi14-548_cl_pass0_src18_1.ximg exists
[Wed Oct  5 19:07:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf03929_pi14-548_cl_pass0_src18.csv
[Wed Oct  5 19:07:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf03929_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf03929_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 19:07:25 2011] fullrun_ccd0_acisf03929_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Wed Oct  5 19:07:25 2011] fullrun_ccd0_acisf03929_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Oct  5 19:07:25 2011] Fit fullrun_ccd0_acisf03929_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Wed Oct  5 19:07:36 2011] Spatial fit model total counts = 24.602300, observed total counts = 26.000000
[Wed Oct  5 19:07:36 2011] Offset between fit and detection position for source 28 = 0.727461 pixels
[Wed Oct  5 19:07:36 2011] 25.471380 total counts/ 2.830980 bgd. counts: snr = 13.455991
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.727461 pixels
  Position = (719.8, 121.9) = 14 45 3.76 1 59 13.9
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 22.6 +/- 5.0
  Background counts = 2.8
  Rate = 0.0006 +/- 0.0001
[Wed Oct  5 19:07:36 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 19:07:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 19:07:36 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 19:07:36 2011] Source does appear to be extended
[Wed Oct  5 19:07:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 19:08:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 19:08:11 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Wed Oct  5 19:08:11 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.116
[Wed Oct  5 19:08:11 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 0.45"
[Wed Oct  5 19:08:14 2011] fullrun_ccd0_acisf03929_pi14-548_cl_pass1_src18.ximg exists
[Wed Oct  5 19:08:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf03929_pi14-548_cl_pass1_src18.csv
[Wed Oct  5 19:08:14 2011] fullrun_ccd0_acisf03929_pi14-548_cl_pass1_src18_1.ximg exists
[Wed Oct  5 19:08:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf03929_pi14-548_cl_pass1_src18.csv
[Wed Oct  5 19:08:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf03929_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf03929_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 19:08:14 2011] fullrun_ccd0_acisf03929_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Wed Oct  5 19:08:14 2011] fullrun_ccd0_acisf03929_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Wed Oct  5 19:08:14 2011] Fit fullrun_ccd0_acisf03929_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Wed Oct  5 19:08:36 2011] Spatial fit model total counts = 25.342000, observed total counts = 26.000000
[Wed Oct  5 19:08:36 2011] Offset between fit and detection position for source 28 = 0.001221 pixels
[Wed Oct  5 19:08:36 2011] 25.772530 total counts/ 3.213330 bgd. counts: snr = 12.584792
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.001221 pixels
  Position = (719.8, 121.9) = 14 45 3.76 1 59 13.9
  Extent = 0.5 (0.3-0.5)", rotation angle = 0
  Source counts = 22.6 +/- 5.1
  Background counts = 3.2
  Rate = 0.0006 +/- 0.0001
[Wed Oct  5 19:08:36 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 19:08:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 19:08:36 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 19:08:36 2011] Source does appear to be extended
[Wed Oct  5 19:08:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 19:09:15 2011] Not overwriting source region fullrun_ccd0_acisf03929_pi14-548_pass1_cl_src28_src.reg
[Wed Oct  5 19:09:15 2011] Extracting stamp from image fullrun_ccd0_acisf03929_pi14-548_cl_sm2.00.img.gz, (699, 101) - (741, 143)
[Wed Oct  5 19:09:15 2011] Writing fullrun_ccd0_acisf03929_pi14-548_pass1_cl_src28.gif
[Wed Oct  5 19:11:37 2011] ../../acisf03929/products/events/fullrun_ccd0_acisf03929_pi14-548_pass1_cl_src28_src.evt and ../../acisf03929/products/events/fullrun_ccd0_acisf03929_pi14-548_pass1_cl_src28_bgd.evt exist, delete to re-create
[Wed Oct  5 19:11:37 2011] Size of ../../acisf03929/products/events/fullrun_ccd0_acisf03929_pi14-548_pass1_cl_src28_src.evt.gz[events] = 23 counts
[Wed Oct  5 19:11:37 2011] Mean chipx,y = (792.74, 995.22)
[Wed Oct  5 19:11:37 2011] Mean tdetx,y = (4056.22, 4339.26)
[Wed Oct  5 19:11:37 2011] chipx,y range = (781.00-814.00, 979.00-1014.00)
[Wed Oct  5 19:11:37 2011] Size of ../../acisf03929/products/events/fullrun_ccd0_acisf03929_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 4 counts
[Wed Oct  5 19:11:37 2011] ../../acisf03929/products/images/fullrun_ccd0_acisf03929_pi14-548_pass1_cl_src28_src.img and ../../acisf03929/products/images/fullrun_ccd0_acisf03929_pi14-548_pass1_cl_src28_bgd.img exist, delete to re-create
[Wed Oct  5 19:11:37 2011] ../../acisf03929/products/spectra/fullrun_ccd0_acisf03929_pi14-548_pass1_cl_src28_src.pi and ../../acisf03929/products/spectra/fullrun_ccd0_acisf03929_pi14-548_pass1_cl_src28_bgd.pi exist, delete to re-create
[Wed Oct  5 19:11:37 2011] Not generating rmf since there are only 22 counts
[Wed Oct  5 19:11:44 2011] ../../acisf03929/products/lightcurves/fullrun_ccd0_acisf03929_pi14-548_pass1_cl_src28_src.lc and ../../acisf03929/products/lightcurves/fullrun_ccd0_acisf03929_pi14-548_pass1_cl_src28_bgd.lc exist, delete to re-create
[Wed Oct  5 19:11:47 2011] 200.543
[Wed Oct  5 19:19:14 2011] Updating aperture counts using extracted products
[Wed Oct  5 19:19:14 2011] Error reading totcts from fullrun_ccd0_acisf03929_pi14-548_pass1_cl_src28_src.pi.gz
[Wed Oct  5 19:19:14 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 19:19:14 2011] Using photon index=1.80, rate=0.000613, arf fullrun_ccd0_acisf03929_pi14-548_pass1_cl_src28.arf
[Wed Oct  5 19:19:14 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 19:19:14 2011] Updating source flux to 6.8e-15
[Wed Oct  5 19:19:22 2011] Source 28 has fewer than 100.000000 counts, skipping spectral fitting