[Thu Oct 27 06:53:17 2011] Detection parameters:
  Position = (1185.8, 474.0) = 12 42 26.39 2 38 33.0
  Extent = 2.3" x 1.8", rotation angle = 102 degrees
  Source counts = 43.4 +/- 7.5
  Background counts = 12.6
  Rate = 0.0006 +/- 0.0001

[Thu Oct 27 06:53:19 2011] Off-axis axis estimate = 8.23'
[Thu Oct 27 06:54:51 2011] Using EEF radius (= 2.99 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 06:54:51 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 06:54:51 2011] Initial guess for spatial extent in simple fitting = 2.99"
[Thu Oct 27 06:54:51 2011] source mask rpix=6.1, npix_max = 173, mask sum = 182, frac = 1.050
[Thu Oct 27 06:54:51 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 2.99"
[Thu Oct 27 06:54:54 2011] fullrun_ccd3_acisf03926_pi14-548_cl_pass0_src30.ximg exists
[Thu Oct 27 06:54:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03926_pi14-548_cl_pass0_src30.csv
[Thu Oct 27 06:54:54 2011] fullrun_ccd3_acisf03926_pi14-548_cl_pass0_src30_1.ximg exists
[Thu Oct 27 06:54:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03926_pi14-548_cl_pass0_src30.csv
[Thu Oct 27 06:54:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03926_pi14-548_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03926_pi14-548_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 06:54:56 2011] fullrun_ccd3_acisf03926_pi14-548_cl_pass0_tfrozen_src30.ximg exists
[Thu Oct 27 06:54:56 2011] fullrun_ccd3_acisf03926_pi14-548_cl_pass0_tfrozen_src30_1.ximg exists
[Thu Oct 27 06:54:56 2011] Fit fullrun_ccd3_acisf03926_pi14-548_cl_pass0_tfrozen_src30 appears to have run properly
[Thu Oct 27 06:55:31 2011] Spatial fit model total counts = 76.991200, observed total counts = 77.000000
[Thu Oct 27 06:55:31 2011] Offset between fit and detection position for source 83 = 1.449410 pixels
[Thu Oct 27 06:55:31 2011] 77.839100 total counts/ 31.947400 bgd. counts: snr = 8.119259
Spatial fit parameters:
  Offset between fit and detection position for source 83 = 1.449410 pixels
  Position = (1186.7, 472.9) = 12 42 26.37 2 38 32.2
  Extent = 2.7 (1.7-4.6)", rotation angle = 0
  Source counts = 45.9 +/- 8.8
  Background counts = 31.9
  Rate = 0.0006 +/- 0.0001
[Thu Oct 27 06:55:32 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 06:55:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 06:55:32 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 06:55:32 2011] Source does appear to be extended
[Thu Oct 27 06:55:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 06:56:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 06:56:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 06:56:06 2011] Initial guess for spatial extent in simple fitting = 2.74"
[Thu Oct 27 06:56:06 2011] source mask rpix=5.6, npix_max = 147, mask sum = 144, frac = 0.978
[Thu Oct 27 06:56:06 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 2.74"
[Thu Oct 27 06:56:09 2011] fullrun_ccd3_acisf03926_pi14-548_cl_pass1_src28.ximg exists
[Thu Oct 27 06:56:09 2011] fullrun_ccd3_acisf03926_pi14-548_cl_pass1_src28_1.ximg exists
[Thu Oct 27 06:56:09 2011] Fit fullrun_ccd3_acisf03926_pi14-548_cl_pass1_src28 appears to have run properly
[Thu Oct 27 06:56:10 2011] fullrun_ccd3_acisf03926_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Thu Oct 27 06:56:10 2011] fullrun_ccd3_acisf03926_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Thu Oct 27 06:56:10 2011] Fit fullrun_ccd3_acisf03926_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly
[Thu Oct 27 06:56:40 2011] Spatial fit model total counts = 70.980000, observed total counts = 71.000000
[Thu Oct 27 06:56:40 2011] Offset between fit and detection position for source 83 = 0.892295 pixels
[Thu Oct 27 06:56:40 2011] 71.351600 total counts/ 34.911600 bgd. counts: snr = 6.167278
Spatial fit parameters:
  Offset between fit and detection position for source 83 = 0.892295 pixels
  Position = (1187.2, 473.7) = 12 42 26.36 2 38 32.6
  Extent = 2.3 (1.2-4.4)", rotation angle = 0
  Source counts = 36.4 +/- 8.4
  Background counts = 34.9
  Rate = 0.0005 +/- 0.0001
[Thu Oct 27 06:56:40 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 06:56:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 06:56:40 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 06:56:40 2011] Source does appear to be extended
[Thu Oct 27 06:56:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 07:02:22 2011] Not overwriting source region fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src83_src.reg
[Thu Oct 27 07:02:22 2011] Extracting stamp from image fullrun_ccd3_acisf03926_pi14-548_cl_sm2.00.img.gz, (1084, 371) - (1275, 577)
[Thu Oct 27 07:02:22 2011] Writing fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src83.gif
[Thu Oct 27 07:03:52 2011] ../../acisf03926/products/events/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src83_src.evt and ../../acisf03926/products/events/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src83_bgd.evt exist, delete to re-create
[Thu Oct 27 07:03:52 2011] Size of ../../acisf03926/products/events/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src83_src.evt.gz[events] = 71 counts
[Thu Oct 27 07:03:52 2011] Mean chipx,y = (27.56, 200.77)
[Thu Oct 27 07:03:52 2011] Mean tdetx,y = (4931.23, 3088.56)
[Thu Oct 27 07:03:52 2011] chipx,y range = (2.00-53.00, 171.00-231.00)
[Thu Oct 27 07:03:52 2011] Size of ../../acisf03926/products/events/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src83_bgd.evt.gz[events] = 192 counts
[Thu Oct 27 07:03:52 2011] ../../acisf03926/products/images/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src83_src.img and ../../acisf03926/products/images/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src83_bgd.img exist, delete to re-create
[Thu Oct 27 07:03:52 2011] ../../acisf03926/products/spectra/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src83_src.pi and ../../acisf03926/products/spectra/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src83_bgd.pi exist, delete to re-create
[Thu Oct 27 07:03:52 2011] Not generating rmf since there are only 36 counts
[Thu Oct 27 07:03:55 2011] ../../acisf03926/products/lightcurves/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src83_src.lc and ../../acisf03926/products/lightcurves/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src83_bgd.lc exist, delete to re-create
[Thu Oct 27 07:06:00 2011] 165.079
[Thu Oct 27 07:06:20 2011] Updating aperture counts using extracted products
[Thu Oct 27 07:06:20 2011] Error reading totcts from fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src83_src.pi.gz
[Thu Oct 27 07:06:21 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 07:06:21 2011] Using photon index=1.80, rate=0.000488, arf fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src83.arf
[Thu Oct 27 07:06:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 07:06:21 2011] Updating source flux to 6.9e-15
[Thu Oct 27 07:06:53 2011] Source 83 has fewer than 100.000000 counts, skipping spectral fitting