[Thu Oct 27 06:53:16 2011] Detection parameters:
  Position = (461.0, 920.2) = 12 42 50.18 2 42 12.5
  Extent = 0.8" x 0.5", rotation angle = 148 degrees
  Source counts = 37.4 +/- 8.3
  Background counts = 31.6
  Rate = 0.0005 +/- 0.0001

[Thu Oct 27 06:53:19 2011] Off-axis axis estimate = 1.39'
[Thu Oct 27 06:54:51 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 06:54:51 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Thu Oct 27 06:54:51 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.603
[Thu Oct 27 06:54:51 2011] Giving source the simple spatial ID 38 for pass 0, mean size = 0.39"
[Thu Oct 27 06:54:54 2011] fullrun_ccd3_acisf03926_pi14-548_cl_pass0_src38.ximg exists
[Thu Oct 27 06:54:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03926_pi14-548_cl_pass0_src38.csv
[Thu Oct 27 06:54:54 2011] fullrun_ccd3_acisf03926_pi14-548_cl_pass0_src38_1.ximg exists
[Thu Oct 27 06:54:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03926_pi14-548_cl_pass0_src38.csv
[Thu Oct 27 06:54:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03926_pi14-548_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03926_pi14-548_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 06:54:56 2011] fullrun_ccd3_acisf03926_pi14-548_cl_pass0_tfrozen_src38.ximg exists
[Thu Oct 27 06:54:56 2011] fullrun_ccd3_acisf03926_pi14-548_cl_pass0_tfrozen_src38_1.ximg exists
[Thu Oct 27 06:54:56 2011] Fit fullrun_ccd3_acisf03926_pi14-548_cl_pass0_tfrozen_src38 appears to have run properly
[Thu Oct 27 06:55:31 2011] Spatial fit model total counts = 166.147000, observed total counts = 166.000000
[Thu Oct 27 06:55:31 2011] Offset between fit and detection position for source 60 = 0.700864 pixels
[Thu Oct 27 06:55:31 2011] 163.404500 total counts/ 127.596000 bgd. counts: snr = 3.170061
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 0.700864 pixels
  Position = (461.5, 920.7) = 12 42 50.19 2 42 12.6
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 35.8 +/- 12.8
  Background counts = 127.6
  Rate = 0.0005 +/- 0.0002
[Thu Oct 27 06:55:32 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 06:55:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 06:55:32 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 06:55:32 2011] Source does appear to be extended
[Thu Oct 27 06:55:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 06:56:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 06:56:06 2011] Initial guess for spatial extent in simple fitting = 0.51"
[Thu Oct 27 06:56:06 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.945
[Thu Oct 27 06:56:06 2011] Giving source the simple spatial ID 35 for pass 1, mean size = 0.51"
[Thu Oct 27 06:56:09 2011] fullrun_ccd3_acisf03926_pi14-548_cl_pass1_src35.ximg exists
[Thu Oct 27 06:56:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03926_pi14-548_cl_pass1_src35.csv
[Thu Oct 27 06:56:09 2011] fullrun_ccd3_acisf03926_pi14-548_cl_pass1_src35_1.ximg exists
[Thu Oct 27 06:56:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03926_pi14-548_cl_pass1_src35.csv
[Thu Oct 27 06:56:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03926_pi14-548_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03926_pi14-548_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 06:56:11 2011] fullrun_ccd3_acisf03926_pi14-548_cl_pass1_tfrozen_src35.ximg exists
[Thu Oct 27 06:56:11 2011] fullrun_ccd3_acisf03926_pi14-548_cl_pass1_tfrozen_src35_1.ximg exists
[Thu Oct 27 06:56:11 2011] Fit fullrun_ccd3_acisf03926_pi14-548_cl_pass1_tfrozen_src35 appears to have run properly
[Thu Oct 27 06:56:40 2011] Spatial fit model total counts = 166.179000, observed total counts = 166.000000
[Thu Oct 27 06:56:40 2011] Offset between fit and detection position for source 60 = 0.003946 pixels
[Thu Oct 27 06:56:40 2011] 163.434900 total counts/ 127.629000 bgd. counts: snr = 3.169421
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 0.003946 pixels
  Position = (461.5, 920.7) = 12 42 50.19 2 42 12.6
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 35.8 +/- 12.8
  Background counts = 127.6
  Rate = 0.0005 +/- 0.0002
[Thu Oct 27 06:56:40 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 06:56:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 06:56:40 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 06:56:40 2011] Source does appear to be extended
[Thu Oct 27 06:56:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 07:02:22 2011] Not overwriting source region fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src60_src.reg
[Thu Oct 27 07:02:22 2011] Extracting stamp from image fullrun_ccd3_acisf03926_pi14-548_cl_sm2.00.img.gz, (438, 897) - (485, 944)
[Thu Oct 27 07:02:22 2011] Writing fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src60.gif
[Thu Oct 27 07:04:06 2011] ../../acisf03926/products/events/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src60_src.evt and ../../acisf03926/products/events/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src60_bgd.evt exist, delete to re-create
[Thu Oct 27 07:04:07 2011] Size of ../../acisf03926/products/events/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src60_src.evt.gz[events] = 66 counts
[Thu Oct 27 07:04:07 2011] Mean chipx,y = (604.71, 835.44)
[Thu Oct 27 07:04:07 2011] Mean tdetx,y = (4296.56, 3665.71)
[Thu Oct 27 07:04:07 2011] chipx,y range = (587.00-623.00, 817.00-852.00)
[Thu Oct 27 07:04:07 2011] Size of ../../acisf03926/products/events/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src60_bgd.evt.gz[events] = 332 counts
[Thu Oct 27 07:04:07 2011] ../../acisf03926/products/images/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src60_src.img and ../../acisf03926/products/images/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src60_bgd.img exist, delete to re-create
[Thu Oct 27 07:04:07 2011] ../../acisf03926/products/spectra/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src60_src.pi and ../../acisf03926/products/spectra/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src60_bgd.pi exist, delete to re-create
[Thu Oct 27 07:04:07 2011] Not generating rmf since there are only 35 counts
[Thu Oct 27 07:04:09 2011] ../../acisf03926/products/lightcurves/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src60_src.lc and ../../acisf03926/products/lightcurves/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src60_bgd.lc exist, delete to re-create
[Thu Oct 27 07:06:00 2011] 201.791
[Thu Oct 27 07:06:20 2011] Updating aperture counts using extracted products
[Thu Oct 27 07:06:20 2011] Error reading totcts from fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src60_src.pi.gz
[Thu Oct 27 07:06:21 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 07:06:21 2011] Using photon index=1.80, rate=0.000479, arf fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src60.arf
[Thu Oct 27 07:06:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 07:06:21 2011] Updating source flux to 5.4e-15
[Thu Oct 27 07:06:53 2011] Source 60 has fewer than 100.000000 counts, skipping spectral fitting