[Thu Oct 27 06:53:18 2011] Detection parameters:
  Position = (302.2, 257.8) = 12 42 55.40 2 36 46.6
  Extent = 2.3" x 1.4", rotation angle = 44 degrees
  Source counts = 57.8 +/- 8.4
  Background counts = 13.2
  Rate = 0.0008 +/- 0.0001

[Thu Oct 27 06:53:19 2011] Off-axis axis estimate = 6.67'
[Thu Oct 27 06:54:51 2011] Using EEF radius (= 1.99 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 06:54:51 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 06:54:51 2011] Initial guess for spatial extent in simple fitting = 1.99"
[Thu Oct 27 06:54:51 2011] source mask rpix=4.0, npix_max = 82, mask sum = 81, frac = 0.982
[Thu Oct 27 06:54:51 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 1.99"
[Thu Oct 27 06:54:54 2011] fullrun_ccd3_acisf03926_pi14-548_cl_pass0_src20.ximg exists
[Thu Oct 27 06:54:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03926_pi14-548_cl_pass0_src20.csv
[Thu Oct 27 06:54:54 2011] fullrun_ccd3_acisf03926_pi14-548_cl_pass0_src20_1.ximg exists
[Thu Oct 27 06:54:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03926_pi14-548_cl_pass0_src20.csv
[Thu Oct 27 06:54:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03926_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03926_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 06:54:56 2011] fullrun_ccd3_acisf03926_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Thu Oct 27 06:54:56 2011] fullrun_ccd3_acisf03926_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Thu Oct 27 06:54:56 2011] Fit fullrun_ccd3_acisf03926_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Thu Oct 27 06:55:31 2011] Spatial fit model total counts = 66.771100, observed total counts = 67.000000
[Thu Oct 27 06:55:31 2011] Offset between fit and detection position for source 108 = 0.710012 pixels
[Thu Oct 27 06:55:31 2011] 66.962200 total counts/ 27.026400 bgd. counts: snr = 7.681894
Spatial fit parameters:
  Offset between fit and detection position for source 108 = 0.710012 pixels
  Position = (302.5, 257.2) = 12 42 55.40 2 36 46.1
  Extent = 1.3 (0.9-1.7)", rotation angle = 0
  Source counts = 39.9 +/- 8.2
  Background counts = 27.0
  Rate = 0.0005 +/- 0.0001
[Thu Oct 27 06:55:32 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 06:55:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 06:55:32 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 06:55:32 2011] Source does appear to be extended
[Thu Oct 27 06:55:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 06:56:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 06:56:06 2011] Initial guess for spatial extent in simple fitting = 1.28"
[Thu Oct 27 06:56:06 2011] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.095
[Thu Oct 27 06:56:06 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 1.28"
[Thu Oct 27 06:56:08 2011] fullrun_ccd3_acisf03926_pi14-548_cl_pass1_src19.ximg exists
[Thu Oct 27 06:56:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03926_pi14-548_cl_pass1_src19.csv
[Thu Oct 27 06:56:08 2011] fullrun_ccd3_acisf03926_pi14-548_cl_pass1_src19_1.ximg exists
[Thu Oct 27 06:56:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03926_pi14-548_cl_pass1_src19.csv
[Thu Oct 27 06:56:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03926_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03926_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 06:56:10 2011] fullrun_ccd3_acisf03926_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Thu Oct 27 06:56:10 2011] fullrun_ccd3_acisf03926_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Thu Oct 27 06:56:10 2011] Fit fullrun_ccd3_acisf03926_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Thu Oct 27 06:56:40 2011] Spatial fit model total counts = 51.924800, observed total counts = 52.000000
[Thu Oct 27 06:56:40 2011] Offset between fit and detection position for source 108 = 0.471510 pixels
[Thu Oct 27 06:56:40 2011] 52.861900 total counts/ 10.529400 bgd. counts: snr = 13.045842
Spatial fit parameters:
  Offset between fit and detection position for source 108 = 0.471510 pixels
  Position = (302.2, 256.8) = 12 42 55.41 2 36 45.9
  Extent = 1.4 (0.5-1.9)", rotation angle = 0
  Source counts = 42.3 +/- 7.3
  Background counts = 10.5
  Rate = 0.0006 +/- 0.0001
[Thu Oct 27 06:56:40 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 06:56:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 06:56:40 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 06:56:40 2011] Source does appear to be extended
[Thu Oct 27 06:56:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 07:02:22 2011] Not overwriting source region fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src108_src.reg
[Thu Oct 27 07:02:22 2011] Extracting stamp from image fullrun_ccd3_acisf03926_pi14-548_cl_sm2.00.img.gz, (240, 195) - (364, 319)
[Thu Oct 27 07:02:22 2011] Writing fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src108.gif
[Thu Oct 27 07:03:26 2011] ../../acisf03926/products/events/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src108_src.evt and ../../acisf03926/products/events/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src108_bgd.evt exist, delete to re-create
[Thu Oct 27 07:03:26 2011] Size of ../../acisf03926/products/events/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src108_src.evt.gz[events] = 60 counts
[Thu Oct 27 07:03:26 2011] Mean chipx,y = (939.62, 239.40)
[Thu Oct 27 07:03:26 2011] Mean tdetx,y = (4892.60, 4000.62)
[Thu Oct 27 07:03:26 2011] chipx,y range = (919.00-967.00, 218.00-263.00)
[Thu Oct 27 07:03:26 2011] Size of ../../acisf03926/products/events/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src108_bgd.evt.gz[events] = 94 counts
[Thu Oct 27 07:03:26 2011] ../../acisf03926/products/images/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src108_src.img and ../../acisf03926/products/images/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src108_bgd.img exist, delete to re-create
[Thu Oct 27 07:03:26 2011] ../../acisf03926/products/spectra/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src108_src.pi and ../../acisf03926/products/spectra/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src108_bgd.pi exist, delete to re-create
[Thu Oct 27 07:03:26 2011] Not generating rmf since there are only 42 counts
[Thu Oct 27 07:03:29 2011] ../../acisf03926/products/lightcurves/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src108_src.lc and ../../acisf03926/products/lightcurves/fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src108_bgd.lc exist, delete to re-create
[Thu Oct 27 07:06:00 2011] 180.141
[Thu Oct 27 07:06:20 2011] Updating aperture counts using extracted products
[Thu Oct 27 07:06:20 2011] Error reading totcts from fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src108_src.pi.gz
[Thu Oct 27 07:06:20 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 07:06:20 2011] Using photon index=1.80, rate=0.000567, arf fullrun_ccd3_acisf03926_pi14-548_pass1_cl_src108.arf
[Thu Oct 27 07:06:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 07:06:20 2011] Updating source flux to 7.1e-15
[Thu Oct 27 07:06:53 2011] Source 108 has fewer than 100.000000 counts, skipping spectral fitting