[Thu Oct 27 06:53:09 2011] Detection parameters:
  Position = (658.7, 228.6) = 12 42 53.45 2 44 44.8
  Extent = 0.6" x 0.5", rotation angle = 44 degrees
  Source counts = 35.7 +/- 6.3
  Background counts = 4.3
  Rate = 0.0005 +/- 8e-05

[Thu Oct 27 06:53:12 2011] Off-axis axis estimate = 1.33'
[Thu Oct 27 06:54:48 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 06:54:48 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Thu Oct 27 06:54:48 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.366
[Thu Oct 27 06:54:48 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 0.39"
[Thu Oct 27 06:54:49 2011] fullrun_ccd2_acisf03926_pi14-548_cl_pass0_src19.ximg exists
[Thu Oct 27 06:54:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03926_pi14-548_cl_pass0_src19.csv
[Thu Oct 27 06:54:49 2011] fullrun_ccd2_acisf03926_pi14-548_cl_pass0_src19_1.ximg exists
[Thu Oct 27 06:54:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03926_pi14-548_cl_pass0_src19.csv
[Thu Oct 27 06:54:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03926_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03926_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 06:54:51 2011] fullrun_ccd2_acisf03926_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Thu Oct 27 06:54:51 2011] fullrun_ccd2_acisf03926_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Thu Oct 27 06:54:51 2011] Fit fullrun_ccd2_acisf03926_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Thu Oct 27 06:55:17 2011] Spatial fit model total counts = 50.999400, observed total counts = 51.000000
[Thu Oct 27 06:55:17 2011] Offset between fit and detection position for source 11 = 0.896138 pixels
[Thu Oct 27 06:55:17 2011] 50.666400 total counts/ 16.378700 bgd. counts: snr = 8.472248
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.896138 pixels
  Position = (659.4, 229.2) = 12 42 53.44 2 44 44.8
  Extent = 0.6 (0.4-0.7)", rotation angle = 0
  Source counts = 34.3 +/- 7.1
  Background counts = 16.4
  Rate = 0.0005 +/- 0.0001
[Thu Oct 27 06:55:17 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 06:55:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 06:55:17 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 06:55:17 2011] Source does appear to be extended
[Thu Oct 27 06:55:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 06:56:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 06:56:04 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Thu Oct 27 06:56:04 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.851
[Thu Oct 27 06:56:04 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 0.55"
[Thu Oct 27 06:56:05 2011] fullrun_ccd2_acisf03926_pi14-548_cl_pass1_src19.ximg exists
[Thu Oct 27 06:56:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03926_pi14-548_cl_pass1_src19.csv
[Thu Oct 27 06:56:05 2011] fullrun_ccd2_acisf03926_pi14-548_cl_pass1_src19_1.ximg exists
[Thu Oct 27 06:56:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03926_pi14-548_cl_pass1_src19.csv
[Thu Oct 27 06:56:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03926_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03926_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 06:56:06 2011] fullrun_ccd2_acisf03926_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Thu Oct 27 06:56:06 2011] fullrun_ccd2_acisf03926_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Thu Oct 27 06:56:06 2011] Fit fullrun_ccd2_acisf03926_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Thu Oct 27 06:56:30 2011] Spatial fit model total counts = 51.999600, observed total counts = 52.000000
[Thu Oct 27 06:56:30 2011] Offset between fit and detection position for source 11 = 0.003100 pixels
[Thu Oct 27 06:56:30 2011] 51.733700 total counts/ 17.799800 bgd. counts: snr = 8.043151
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.003100 pixels
  Position = (659.4, 229.2) = 12 42 53.44 2 44 44.8
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 33.9 +/- 7.2
  Background counts = 17.8
  Rate = 0.0005 +/- 0.0001
[Thu Oct 27 06:56:30 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 06:56:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 06:56:30 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 06:56:30 2011] Source does appear to be extended
[Thu Oct 27 06:56:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 06:59:11 2011] Not overwriting source region fullrun_ccd2_acisf03926_pi14-548_pass1_cl_src11_src.reg
[Thu Oct 27 06:59:11 2011] Extracting stamp from image fullrun_ccd2_acisf03926_pi14-548_cl_sm2.00.img.gz, (634, 204) - (684, 254)
[Thu Oct 27 06:59:11 2011] Writing fullrun_ccd2_acisf03926_pi14-548_pass1_cl_src11.gif
[Thu Oct 27 07:00:13 2011] ../../acisf03926/products/events/fullrun_ccd2_acisf03926_pi14-548_pass1_cl_src11_src.evt and ../../acisf03926/products/events/fullrun_ccd2_acisf03926_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Thu Oct 27 07:00:13 2011] Size of ../../acisf03926/products/events/fullrun_ccd2_acisf03926_pi14-548_pass1_cl_src11_src.evt.gz[events] = 40 counts
[Thu Oct 27 07:00:13 2011] Mean chipx,y = (413.23, 912.67)
[Thu Oct 27 07:00:13 2011] Mean tdetx,y = (3973.68, 3672.78)
[Thu Oct 27 07:00:13 2011] chipx,y range = (395.00-429.00, 892.00-927.00)
[Thu Oct 27 07:00:13 2011] Size of ../../acisf03926/products/events/fullrun_ccd2_acisf03926_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 46 counts
[Thu Oct 27 07:00:13 2011] ../../acisf03926/products/images/fullrun_ccd2_acisf03926_pi14-548_pass1_cl_src11_src.img and ../../acisf03926/products/images/fullrun_ccd2_acisf03926_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Thu Oct 27 07:00:13 2011] ../../acisf03926/products/spectra/fullrun_ccd2_acisf03926_pi14-548_pass1_cl_src11_src.pi and ../../acisf03926/products/spectra/fullrun_ccd2_acisf03926_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Thu Oct 27 07:00:13 2011] Not generating rmf since there are only 33 counts
[Thu Oct 27 07:00:16 2011] ../../acisf03926/products/lightcurves/fullrun_ccd2_acisf03926_pi14-548_pass1_cl_src11_src.lc and ../../acisf03926/products/lightcurves/fullrun_ccd2_acisf03926_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Thu Oct 27 07:02:20 2011] 203.55
[Thu Oct 27 07:06:18 2011] Updating aperture counts using extracted products
[Thu Oct 27 07:06:18 2011] Error reading totcts from fullrun_ccd2_acisf03926_pi14-548_pass1_cl_src11_src.pi.gz
[Thu Oct 27 07:06:19 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 07:06:19 2011] Using photon index=1.80, rate=0.000454, arf fullrun_ccd2_acisf03926_pi14-548_pass1_cl_src11.arf
[Thu Oct 27 07:06:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 07:06:19 2011] Updating source flux to 5e-15
[Thu Oct 27 07:06:38 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting