[Sat Oct 22 13:54:50 2011] Detection parameters:
  Position = (486.4, 342.2) = 12 9 53.50 -52 24 52.2
  Extent = 0.5" x 0.5", rotation angle = 4 degrees
  Source counts = 14.1 +/- 3.9
  Background counts = 0.9
  Rate = 0.0007 +/- 0.0002

[Sat Oct 22 13:54:51 2011] Off-axis axis estimate = 1.40'
[Sat Oct 22 13:55:32 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 13:55:32 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Sat Oct 22 13:55:32 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.903
[Sat Oct 22 13:55:32 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.39"
[Sat Oct 22 13:55:32 2011] fullrun_ccd7_acisf03913_pi14-548_cl_pass0_src11.ximg exists
[Sat Oct 22 13:55:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03913_pi14-548_cl_pass0_src11.csv
[Sat Oct 22 13:55:32 2011] fullrun_ccd7_acisf03913_pi14-548_cl_pass0_src11_1.ximg exists
[Sat Oct 22 13:55:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03913_pi14-548_cl_pass0_src11.csv
[Sat Oct 22 13:55:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03913_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03913_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 13:55:33 2011] fullrun_ccd7_acisf03913_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Sat Oct 22 13:55:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03913_pi14-548_cl_pass0_tfrozen_src11.csv
[Sat Oct 22 13:55:33 2011] fullrun_ccd7_acisf03913_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Oct 22 13:55:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03913_pi14-548_cl_pass0_tfrozen_src11.csv
[Sat Oct 22 13:55:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03913_pi14-548_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03913_pi14-548_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 13:55:39 2011] Spatial fit model total counts = 16.808900, observed total counts = 18.000000
[Sat Oct 22 13:55:39 2011] Offset between fit and detection position for source 5 = 0.821407 pixels
[Sat Oct 22 13:55:39 2011] 16.234460 total counts/ 2.224660 bgd. counts: snr = 9.392909
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.821407 pixels
  Position = (487.1, 342.7) = 12 9 53.49 -52 24 52.2
  Extent = 0.6 (0.3-0.7)", rotation angle = 0
  Source counts = 14.0 +/- 4.0
  Background counts = 2.2
  Rate = 0.0007 +/- 0.0002
[Sat Oct 22 13:55:39 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 13:55:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 13:55:39 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 13:55:39 2011] Source does appear to be extended
[Sat Oct 22 13:55:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 13:55:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 13:55:59 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Sat Oct 22 13:55:59 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.075
[Sat Oct 22 13:55:59 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.58"
[Sat Oct 22 13:55:59 2011] fullrun_ccd7_acisf03913_pi14-548_cl_pass1_src11.ximg exists
[Sat Oct 22 13:55:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03913_pi14-548_cl_pass1_src11.csv
[Sat Oct 22 13:55:59 2011] fullrun_ccd7_acisf03913_pi14-548_cl_pass1_src11_1.ximg exists
[Sat Oct 22 13:55:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03913_pi14-548_cl_pass1_src11.csv
[Sat Oct 22 13:55:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03913_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03913_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 13:56:00 2011] fullrun_ccd7_acisf03913_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Sat Oct 22 13:56:00 2011] fullrun_ccd7_acisf03913_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Oct 22 13:56:00 2011] Fit fullrun_ccd7_acisf03913_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Oct 22 13:56:07 2011] Spatial fit model total counts = 19.665600, observed total counts = 20.000000
[Sat Oct 22 13:56:07 2011] Offset between fit and detection position for source 5 = 0.279684 pixels
[Sat Oct 22 13:56:07 2011] 18.865430 total counts/ 6.600130 bgd. counts: snr = 4.774215
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.279684 pixels
  Position = (487.4, 342.6) = 12 9 53.48 -52 24 52.2
  Extent = 0.4 (0.3-0.7)", rotation angle = 0
  Source counts = 12.3 +/- 4.3
  Background counts = 6.6
  Rate = 0.0006 +/- 0.0002
[Sat Oct 22 13:56:07 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 13:56:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 13:56:07 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 13:56:07 2011] Source does appear to be extended
[Sat Oct 22 13:56:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 13:58:27 2011] Not overwriting source region fullrun_ccd7_acisf03913_pi14-548_pass1_cl_src5_src.reg
[Sat Oct 22 13:58:27 2011] Extracting stamp from image fullrun_ccd7_acisf03913_pi14-548_cl_sm2.00.img.gz, (468, 323) - (507, 362)
[Sat Oct 22 13:58:28 2011] Writing fullrun_ccd7_acisf03913_pi14-548_pass1_cl_src5.gif
[Sat Oct 22 13:59:41 2011] ../../acisf03913/products/events/fullrun_ccd7_acisf03913_pi14-548_pass1_cl_src5_src.evt and ../../acisf03913/products/events/fullrun_ccd7_acisf03913_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Sat Oct 22 13:59:41 2011] Size of ../../acisf03913/products/events/fullrun_ccd7_acisf03913_pi14-548_pass1_cl_src5_src.evt.gz[events] = 15 counts
[Sat Oct 22 13:59:41 2011] Mean chipx,y = (279.20, 338.60)
[Sat Oct 22 13:59:41 2011] Mean tdetx,y = (4196.20, 2040.60)
[Sat Oct 22 13:59:41 2011] chipx,y range = (259.00-290.00, 322.00-356.00)
[Sat Oct 22 13:59:42 2011] Size of ../../acisf03913/products/events/fullrun_ccd7_acisf03913_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 7 counts
[Sat Oct 22 13:59:42 2011] ../../acisf03913/products/images/fullrun_ccd7_acisf03913_pi14-548_pass1_cl_src5_src.img and ../../acisf03913/products/images/fullrun_ccd7_acisf03913_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Sat Oct 22 13:59:42 2011] Not generating rmf since there are only 12 counts
[Sat Oct 22 13:59:42 2011] arf not found, will run specextract
[Sat Oct 22 13:59:43 2011] ../../acisf03913/products/spectra/fullrun_ccd7_acisf03913_pi14-548_pass1_cl_src5_bkg.pi not found
[Sat Oct 22 13:59:43 2011] ../../acisf03913/products/spectra/fullrun_ccd7_acisf03913_pi14-548_pass1_cl_src5.warf not found
[Sat Oct 22 13:59:43 2011] ../../acisf03913/products/spectra/fullrun_ccd7_acisf03913_pi14-548_pass1_cl_src5.wrmf not found
[Sat Oct 22 13:59:43 2011] Removal of ../../acisf03913/products/spectra/fullrun_ccd7_acisf03913_pi14-548_pass1_cl_src5.soff failed
[Sat Oct 22 13:59:43 2011] Failed to rename ../../acisf03913/products/spectra/fullrun_ccd7_acisf03913_pi14-548_pass1_cl_src5_grp.pi to ../../acisf03913/products/spectra/fullrun_ccd7_acisf03913_pi14-548_pass1_cl_src5_src.pi
[Sat Oct 22 13:59:49 2011] ../../acisf03913/products/lightcurves/fullrun_ccd7_acisf03913_pi14-548_pass1_cl_src5_src.lc and ../../acisf03913/products/lightcurves/fullrun_ccd7_acisf03913_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Sat Oct 22 13:59:50 2011] No arf file found
[Sat Oct 22 13:59:52 2011] Updating aperture counts using extracted products
[Sat Oct 22 13:59:52 2011] Error reading totcts from fullrun_ccd7_acisf03913_pi14-548_pass1_cl_src5_src.pi
[Sat Oct 22 13:59:52 2011] No arf file for this source, not re-computing flux
[Sat Oct 22 13:59:57 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 22 13:59:58 2011] acisf03913/analysis//spectral/fullrun_ccd7_acisf03913_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete