[Sat Oct  1 19:07:23 2011] Detection parameters:
  Position = (545.8, 1144.6) = 4 39 43.35 7 33 39.1
  Extent = 4.1" x 2.9", rotation angle = 91 degrees
  Source counts = 39.1 +/- 7.0
  Background counts = 9.9
  Rate = 0.002 +/- 0.0004

[Sat Oct  1 19:07:27 2011] Off-axis axis estimate = 9.58'
[Sat Oct  1 19:08:23 2011] Using EEF radius (= 4.06 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 19:08:23 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  1 19:08:23 2011] Initial guess for spatial extent in simple fitting = 4.06"
[Sat Oct  1 19:08:23 2011] source mask rpix=8.2, npix_max = 306, mask sum = 306, frac = 1.000
[Sat Oct  1 19:08:23 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 4.06"
[Sat Oct  1 19:08:24 2011] fullrun_ccd3_acisf03906_pi14-548_cl_pass0_src2.ximg exists
[Sat Oct  1 19:08:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03906_pi14-548_cl_pass0_src2.csv
[Sat Oct  1 19:08:24 2011] fullrun_ccd3_acisf03906_pi14-548_cl_pass0_src2_1.ximg exists
[Sat Oct  1 19:08:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03906_pi14-548_cl_pass0_src2.csv
[Sat Oct  1 19:08:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03906_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03906_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 19:08:24 2011] fullrun_ccd3_acisf03906_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sat Oct  1 19:08:24 2011] fullrun_ccd3_acisf03906_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Oct  1 19:08:24 2011] Fit fullrun_ccd3_acisf03906_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Oct  1 19:08:32 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 38.291231 pixels away
[Sat Oct  1 19:08:32 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 19:08:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 19:08:32 2011] Assessing source extent using major
[Sat Oct  1 19:08:32 2011] Source does appear to be extended
[Sat Oct  1 19:08:32 2011] Computing asymmetry using major and minor axis, asym = 1.41
[Sat Oct  1 19:08:52 2011] Using EEF radius (= 4.06 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 19:08:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  1 19:08:52 2011] Initial guess for spatial extent in simple fitting = 4.06"
[Sat Oct  1 19:08:52 2011] source mask rpix=8.2, npix_max = 306, mask sum = 306, frac = 1.000
[Sat Oct  1 19:08:52 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 4.06"
[Sat Oct  1 19:08:53 2011] fullrun_ccd3_acisf03906_pi14-548_cl_pass1_src2.ximg exists
[Sat Oct  1 19:08:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03906_pi14-548_cl_pass1_src2.csv
[Sat Oct  1 19:08:53 2011] fullrun_ccd3_acisf03906_pi14-548_cl_pass1_src2_1.ximg exists
[Sat Oct  1 19:08:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03906_pi14-548_cl_pass1_src2.csv
[Sat Oct  1 19:08:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03906_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03906_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 19:08:54 2011] fullrun_ccd3_acisf03906_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sat Oct  1 19:08:54 2011] fullrun_ccd3_acisf03906_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Oct  1 19:08:54 2011] Fit fullrun_ccd3_acisf03906_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Oct  1 19:09:02 2011] Spatial fit model total counts = 50.911700, observed total counts = 51.000000
[Sat Oct  1 19:09:02 2011] Offset between fit and detection position for source 2 = 1.663597 pixels
[Sat Oct  1 19:09:02 2011] 51.171000 total counts/ 23.826000 bgd. counts: snr = 5.602119
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.663597 pixels
  Position = (545.9, 1142.9) = 4 39 43.37 7 33 38.0
  Extent = 2.2 (1.5-3.5)", rotation angle = 0
  Source counts = 27.3 +/- 7.2
  Background counts = 23.8
  Rate = 0.001 +/- 0.0004
[Sat Oct  1 19:09:02 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 19:09:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 19:09:02 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 19:09:02 2011] Source does appear to be extended
[Sat Oct  1 19:09:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 19:11:10 2011] Not overwriting source region fullrun_ccd3_acisf03906_pi14-548_pass1_cl_src2_src.reg
[Sat Oct  1 19:11:10 2011] Extracting stamp from image fullrun_ccd3_acisf03906_pi14-548_cl_sm2.00.img.gz, (446, 1043) - (646, 1243)
[Sat Oct  1 19:11:10 2011] Writing fullrun_ccd3_acisf03906_pi14-548_pass1_cl_src2.gif
[Sat Oct  1 19:11:14 2011] ../../acisf03906/products/events/fullrun_ccd3_acisf03906_pi14-548_pass1_cl_src2_src.evt and ../../acisf03906/products/events/fullrun_ccd3_acisf03906_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sat Oct  1 19:11:14 2011] Size of ../../acisf03906/products/events/fullrun_ccd3_acisf03906_pi14-548_pass1_cl_src2_src.evt.gz[events] = 40 counts
[Sat Oct  1 19:11:14 2011] Mean chipx,y = (223.70, 104.03)
[Sat Oct  1 19:11:14 2011] Mean tdetx,y = (5027.98, 3284.70)
[Sat Oct  1 19:11:14 2011] chipx,y range = (201.00-245.00, 75.00-127.00)
[Sat Oct  1 19:11:14 2011] Size of ../../acisf03906/products/events/fullrun_ccd3_acisf03906_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 44 counts
[Sat Oct  1 19:11:14 2011] ../../acisf03906/products/images/fullrun_ccd3_acisf03906_pi14-548_pass1_cl_src2_src.img and ../../acisf03906/products/images/fullrun_ccd3_acisf03906_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sat Oct  1 19:11:14 2011] ../../acisf03906/products/spectra/fullrun_ccd3_acisf03906_pi14-548_pass1_cl_src2_src.pi and ../../acisf03906/products/spectra/fullrun_ccd3_acisf03906_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sat Oct  1 19:11:14 2011] Not generating rmf since there are only 27 counts
[Sat Oct  1 19:11:17 2011] ../../acisf03906/products/lightcurves/fullrun_ccd3_acisf03906_pi14-548_pass1_cl_src2_src.lc and ../../acisf03906/products/lightcurves/fullrun_ccd3_acisf03906_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sat Oct  1 19:12:20 2011] 157.843
[Sat Oct  1 19:12:27 2011] Updating aperture counts using extracted products
[Sat Oct  1 19:12:27 2011] Error reading totcts from fullrun_ccd3_acisf03906_pi14-548_pass1_cl_src2_src.pi.gz
[Sat Oct  1 19:12:27 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 19:12:27 2011] Using photon index=1.80, rate=0.00141, arf fullrun_ccd3_acisf03906_pi14-548_pass1_cl_src2.arf
[Sat Oct  1 19:12:27 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 19:12:27 2011] Updating source flux to 2e-14
[Sat Oct  1 19:12:33 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting