Source List

Observation details report
Detailed source parameters (including errors) in a comma-separated values file

Click on source number for detailed analysis, including spectral fits if applicable

data idnum idradec telescope instrument x y cnts cntserr rate rateerr SNR poisprob sigmaj sigmin incang offax cnts_soft cnts_hard hr hr_err ext var N_H flux vign flags
Report srcpi bgdpi arf 1 X184513.26-025726.7 chandra ccd7 184 123.5 5.69976 2.82848 0.000488797 0.000242563 2.5338 0.98518 1.12998 0.677635 43.807 5.26314 A F 1.77e+22 7.65589e-15 1 dx
Report srcpi bgdpi arf 2 X184507.31-025657.2 chandra ccd7 365.652 183.87 14.1087 4.2856 0.00120993 0.000367522 6.27195 1 0.853578 0.853578 0 3.73055 F F 1.77e+22 1.84185e-14 1 dsx
Report srcpi bgdpi arf 4 X184509.75-025714.6 chandra ccd7 291 148.167 5.12315 2.44951 0.000439348 0.000210064 2.27747 0.98518 0.492 0.492 2.394e-08 4.36624 F F 1.77e+22 6.71936e-15 1 dx
Report srcpi bgdpi arf 5 X184454.69-025653.3 chandra ccd7 750.132 191.818 83.4482 9.56993 0.00715632 0.000820695 37.0965 1 0.476539 0.351527 19.7576 0.608131 F F 1.77e+22 1.02248e-13 1 dsx

counts and rate are bgd.-subtracted, based on simple spatial fitting (if done) or extracted counts from aperture otherwise (N.B., in either case aperture counts are given csv file).
cntserr, rateerr = Error on (source) counts and count rate, based on error in total counts
SNR = signal-to-noise ratio, computed using Nsrc/sqrt(Nbgd)
poisprob = Poisson probability of observing total counts given bgd. counts
sigmaj, sigmin = source extent (from detection output or spatial fitting) in units of arcsecs.
incang = position angle of source (inclination from x-axis)
cnts_soft = bgd.-subtracted counts in soft band (0.50 - 2.00 KeV, always taken directly from source aperture rather than model fitting)
cnts_hard = bgd.-subtracted counts in hard band (2.00 - 7.99 KeV, always taken directly from source aperture rather than model fitting)
hr, hr_err = hardness ratio ([cnts_hard-cnts_soft]/[cnts_hard+cnts_soft]) and error
ext = source extension flag: F = false (not extended), T = true (extended), A = asymetric (ratio of sigmaj/sigmin > 1 + x, where x = 0.5 by default)
var = variability flag: U = unknown, F = false (is not variable), T = true
N_H = Galactic column density as determined from LHEASOFT nh program
flux = flux determined from count rate using pimms (in the 0.30-8.00 keV bandpass for a power-law model with ph. index = 1.8)
vign = vignetting correction
Flags: d = detection parameters, s = simple spatial fitting parameters, b = simple spatial fitting failed, p = poor simple spatial fit, x = extracted events parameters, t = temporal anaylsis parameters, i = psf spatial fitting parameters, f = spectral fitting parameters, c = source is confused, u = user-defined source, v = detected source coincident with user-defined source, r = source is in region-of-interest