[Fri Sep 23 21:49:07 2011] Detection parameters:
  Position = (1061.5, 652.5) = 19 12 38.05 10 10 44.9
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 146.9 +/- 13.6
  Background counts = 37.1
  Rate = 0.008 +/- 0.0007

[Fri Sep 23 21:49:09 2011] Off-axis axis estimate = 9.83'
[Fri Sep 23 21:49:56 2011] Using EEF radius (= 4.28 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 21:49:56 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 21:49:56 2011] Initial guess for spatial extent in simple fitting = 4.28"
[Fri Sep 23 21:49:56 2011] source mask rpix=8.7, npix_max = 338, mask sum = 302, frac = 0.892
[Fri Sep 23 21:49:56 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.28"
[Fri Sep 23 21:49:57 2011] fullrun_ccd6_acisf03854_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 23 21:49:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03854_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 21:49:57 2011] fullrun_ccd6_acisf03854_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 23 21:49:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03854_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 21:49:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf03854_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf03854_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 21:49:57 2011] fullrun_ccd6_acisf03854_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 23 21:49:57 2011] fullrun_ccd6_acisf03854_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 23 21:49:57 2011] Fit fullrun_ccd6_acisf03854_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 23 21:50:01 2011] Spatial fit model total counts = 322.238000, observed total counts = 325.000000
[Fri Sep 23 21:50:01 2011] Offset between fit and detection position for source 1 = 2.916493 pixels
[Fri Sep 23 21:50:01 2011] 322.306600 total counts/ 30.524600 bgd. counts: snr = 52.812108
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.916493 pixels
  Position = (1064.3, 653.4) = 19 12 37.98 10 10 45.1
  Extent = 5.5 (4.8-6.1)", rotation angle = 0
  Source counts = 291.8 +/- 18.0
  Background counts = 30.5
  Rate = 0.01 +/- 0.0009
[Fri Sep 23 21:50:01 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 21:50:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 21:50:01 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 21:50:01 2011] Source does appear to be extended
[Fri Sep 23 21:50:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 21:50:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 21:50:18 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 21:50:18 2011] Initial guess for spatial extent in simple fitting = 5.48"
[Fri Sep 23 21:50:18 2011] source mask rpix=11.1, npix_max = 541, mask sum = 458, frac = 0.846
[Fri Sep 23 21:50:18 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.48"
[Fri Sep 23 21:50:18 2011] fullrun_ccd6_acisf03854_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 23 21:50:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03854_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 21:50:18 2011] fullrun_ccd6_acisf03854_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 23 21:50:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03854_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 21:50:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf03854_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf03854_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 21:50:19 2011] fullrun_ccd6_acisf03854_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 23 21:50:19 2011] fullrun_ccd6_acisf03854_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 23 21:50:19 2011] Fit fullrun_ccd6_acisf03854_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 23 21:50:25 2011] Spatial fit model total counts = 338.322000, observed total counts = 339.000000
[Fri Sep 23 21:50:25 2011] Offset between fit and detection position for source 1 = 0.403718 pixels
[Fri Sep 23 21:50:25 2011] 337.985200 total counts/ 37.448200 bgd. counts: snr = 49.111418
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.403718 pixels
  Position = (1064.4, 653.8) = 19 12 37.97 10 10 45.3
  Extent = 5.6 (5.0-6.1)", rotation angle = 0
  Source counts = 300.5 +/- 18.4
  Background counts = 37.4
  Rate = 0.02 +/- 0.0009
[Fri Sep 23 21:50:25 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 21:50:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 21:50:25 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 21:50:25 2011] Source does appear to be extended
[Fri Sep 23 21:50:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 21:50:47 2011] Not overwriting source region fullrun_ccd6_acisf03854_pi14-548_pass1_cl_src1_src.reg
[Fri Sep 23 21:50:47 2011] Extracting stamp from image fullrun_ccd6_acisf03854_pi14-548_cl_sm2.00.img.gz, (810, 400) - (1187, 908)
[Fri Sep 23 21:50:47 2011] Writing fullrun_ccd6_acisf03854_pi14-548_pass1_cl_src1.gif
[Fri Sep 23 21:50:48 2011] ../../acisf03854/products/events/fullrun_ccd6_acisf03854_pi14-548_pass1_cl_src1_src.evt and ../../acisf03854/products/events/fullrun_ccd6_acisf03854_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Sep 23 21:50:48 2011] Size of ../../acisf03854/products/events/fullrun_ccd6_acisf03854_pi14-548_pass1_cl_src1_src.evt.gz[events] = 335 counts
[Fri Sep 23 21:50:48 2011] Mean chipx,y = (54.41, 664.54)
[Fri Sep 23 21:50:48 2011] Mean tdetx,y = (2929.41, 2366.54)
[Fri Sep 23 21:50:48 2011] chipx,y range = (12.00-105.00, 615.00-712.00)
[Fri Sep 23 21:50:48 2011] Size of ../../acisf03854/products/events/fullrun_ccd6_acisf03854_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 208 counts
[Fri Sep 23 21:50:48 2011] ../../acisf03854/products/images/fullrun_ccd6_acisf03854_pi14-548_pass1_cl_src1_src.img and ../../acisf03854/products/images/fullrun_ccd6_acisf03854_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Sep 23 21:50:48 2011] ../../acisf03854/products/spectra/fullrun_ccd6_acisf03854_pi14-548_pass1_cl_src1_src.pi and ../../acisf03854/products/spectra/fullrun_ccd6_acisf03854_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Sep 23 21:50:51 2011] ../../acisf03854/products/lightcurves/fullrun_ccd6_acisf03854_pi14-548_pass1_cl_src1_src.lc and ../../acisf03854/products/lightcurves/fullrun_ccd6_acisf03854_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Sep 23 21:51:06 2011] Keeping rmf generated by specextract
[Fri Sep 23 21:51:06 2011] 172.525
[Fri Sep 23 21:51:54 2011] Updating aperture counts using extracted products
[Fri Sep 23 21:51:54 2011] Error reading totcts from fullrun_ccd6_acisf03854_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Sep 23 21:51:54 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 21:51:54 2011] Using photon index=1.80, rate=0.0154, arf fullrun_ccd6_acisf03854_pi14-548_pass1_cl_src1.arf
[Fri Sep 23 21:51:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 21:51:54 2011] Updating source flux to 2.9e-13
[Fri Sep 23 21:52:06 2011] Reading fit data from acisf03854/analysis//spectral/fullrun_ccd6_acisf03854_pi14-548_pass1_cl_src1_pl.csv
[Fri Sep 23 21:52:06 2011] Spectral fit parameter nH value = 5.45801e+21
[Fri Sep 23 21:52:06 2011] Spectral fit parameter PhoIndex value = 1.11428
[Fri Sep 23 21:52:06 2011] Failed to get F(0.3-8.0) from acisf03854/analysis//spectral/fullrun_ccd6_acisf03854_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Sep 23 21:52:06 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 21:52:06 2011] Using Nh = 5.5e+21, photon index=1.11, rate=0.0154, arf fullrun_ccd6_acisf03854_pi14-548_pass1_cl_src1.arf
[Fri Sep 23 21:52:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 21:52:06 2011] Updating source flux to 3e-13