[Fri Sep 30 02:48:04 2011] Detection parameters:
  Position = (1032.2, 412.1) = 18 25 53.21 -13 5 29.6
  Extent = 1.0" x 0.6", rotation angle = 41 degrees
  Source counts = 113.0 +/- 10.7
  Background counts = 2.0
  Rate = 0.008 +/- 0.0007

[Fri Sep 30 02:48:04 2011] Off-axis axis estimate = 5.61'
[Fri Sep 30 02:48:42 2011] Using EEF radius (= 1.44 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 02:48:42 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 02:48:42 2011] Initial guess for spatial extent in simple fitting = 1.44"
[Fri Sep 30 02:48:42 2011] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.038
[Fri Sep 30 02:48:42 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.44"
[Fri Sep 30 02:48:43 2011] fullrun_ccd1_acisf03851_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 30 02:48:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03851_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 02:48:43 2011] fullrun_ccd1_acisf03851_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 30 02:48:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03851_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 02:48:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf03851_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf03851_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 02:48:43 2011] fullrun_ccd1_acisf03851_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 02:48:43 2011] fullrun_ccd1_acisf03851_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 02:48:43 2011] Fit fullrun_ccd1_acisf03851_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 02:48:50 2011] Spatial fit model total counts = 127.180000, observed total counts = 129.000000
[Fri Sep 30 02:48:50 2011] Offset between fit and detection position for source 19 = 0.958402 pixels
[Fri Sep 30 02:48:50 2011] 127.923500 total counts/ 13.518500 bgd. counts: snr = 31.115784
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.958402 pixels
  Position = (1033.0, 412.6) = 18 25 53.20 -13 5 29.6
  Extent = 1.1 (1.0-1.3)", rotation angle = 0
  Source counts = 114.4 +/- 11.3
  Background counts = 13.5
  Rate = 0.008 +/- 0.0008
[Fri Sep 30 02:48:50 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 02:48:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 02:48:50 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 02:48:50 2011] Source does appear to be extended
[Fri Sep 30 02:48:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 02:49:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 02:49:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 02:49:09 2011] Initial guess for spatial extent in simple fitting = 1.14"
[Fri Sep 30 02:49:09 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.941
[Fri Sep 30 02:49:09 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.14"
[Fri Sep 30 02:49:09 2011] fullrun_ccd1_acisf03851_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 30 02:49:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03851_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 02:49:09 2011] fullrun_ccd1_acisf03851_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 30 02:49:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03851_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 02:49:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf03851_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf03851_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 02:49:09 2011] fullrun_ccd1_acisf03851_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 02:49:09 2011] fullrun_ccd1_acisf03851_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 02:49:09 2011] Fit fullrun_ccd1_acisf03851_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 02:49:16 2011] Spatial fit model total counts = 123.607000, observed total counts = 125.000000
[Fri Sep 30 02:49:16 2011] Offset between fit and detection position for source 19 = 0.130438 pixels
[Fri Sep 30 02:49:16 2011] 123.316970 total counts/ 3.936970 bgd. counts: snr = 60.165914
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.130438 pixels
  Position = (1033.1, 412.6) = 18 25 53.19 -13 5 29.6
  Extent = 1.2 (1.0-1.4)", rotation angle = 0
  Source counts = 119.4 +/- 11.1
  Background counts = 3.9
  Rate = 0.008 +/- 0.0007
[Fri Sep 30 02:49:16 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 02:49:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 02:49:16 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 02:49:16 2011] Source does appear to be extended
[Fri Sep 30 02:49:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 02:50:14 2011] Not overwriting source region fullrun_ccd1_acisf03851_pi14-548_pass1_cl_src19_src.reg
[Fri Sep 30 02:50:14 2011] Extracting stamp from image fullrun_ccd1_acisf03851_pi14-548_cl_sm2.00.img.gz, (978, 358) - (1088, 468)
[Fri Sep 30 02:50:14 2011] Writing fullrun_ccd1_acisf03851_pi14-548_pass1_cl_src19.gif
[Fri Sep 30 02:50:16 2011] ../../acisf03851/products/events/fullrun_ccd1_acisf03851_pi14-548_pass1_cl_src19_src.evt and ../../acisf03851/products/events/fullrun_ccd1_acisf03851_pi14-548_pass1_cl_src19_bgd.evt exist, delete to re-create
[Fri Sep 30 02:50:16 2011] Size of ../../acisf03851/products/events/fullrun_ccd1_acisf03851_pi14-548_pass1_cl_src19_src.evt.gz[events] = 126 counts
[Fri Sep 30 02:50:16 2011] Mean chipx,y = (57.71, 330.25)
[Fri Sep 30 02:50:16 2011] Mean tdetx,y = (4801.75, 4164.71)
[Fri Sep 30 02:50:16 2011] chipx,y range = (40.00-83.00, 308.00-350.00)
[Fri Sep 30 02:50:16 2011] Size of ../../acisf03851/products/events/fullrun_ccd1_acisf03851_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 24 counts
[Fri Sep 30 02:50:16 2011] ../../acisf03851/products/images/fullrun_ccd1_acisf03851_pi14-548_pass1_cl_src19_src.img and ../../acisf03851/products/images/fullrun_ccd1_acisf03851_pi14-548_pass1_cl_src19_bgd.img exist, delete to re-create
[Fri Sep 30 02:50:16 2011] rmf not found, will run specextract
[Fri Sep 30 02:50:16 2011] arf not found, will run specextract
[Fri Sep 30 02:50:18 2011] ../../acisf03851/products/spectra/fullrun_ccd1_acisf03851_pi14-548_pass1_cl_src19_bkg.pi not found
[Fri Sep 30 02:50:18 2011] ../../acisf03851/products/spectra/fullrun_ccd1_acisf03851_pi14-548_pass1_cl_src19.warf not found
[Fri Sep 30 02:50:18 2011] ../../acisf03851/products/spectra/fullrun_ccd1_acisf03851_pi14-548_pass1_cl_src19.wrmf not found
[Fri Sep 30 02:50:18 2011] Removal of ../../acisf03851/products/spectra/fullrun_ccd1_acisf03851_pi14-548_pass1_cl_src19.soff failed
[Fri Sep 30 02:50:18 2011] Failed to rename ../../acisf03851/products/spectra/fullrun_ccd1_acisf03851_pi14-548_pass1_cl_src19_grp.pi to ../../acisf03851/products/spectra/fullrun_ccd1_acisf03851_pi14-548_pass1_cl_src19_src.pi
[Fri Sep 30 02:50:24 2011] ../../acisf03851/products/lightcurves/fullrun_ccd1_acisf03851_pi14-548_pass1_cl_src19_src.lc and ../../acisf03851/products/lightcurves/fullrun_ccd1_acisf03851_pi14-548_pass1_cl_src19_bgd.lc exist, delete to re-create
[Fri Sep 30 02:52:32 2011] No arf file found
[Fri Sep 30 02:54:43 2011] Updating aperture counts using extracted products
[Fri Sep 30 02:54:43 2011] Error reading totcts from fullrun_ccd1_acisf03851_pi14-548_pass1_cl_src19_src.pi
[Fri Sep 30 02:54:44 2011] No arf file for this source, not re-computing flux
[Fri Sep 30 02:54:47 2011] Source 19 has no response, skipping
[Fri Sep 30 02:54:48 2011] acisf03851/analysis//spectral/fullrun_ccd1_acisf03851_pi14-548_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete