[Fri Sep 30 18:17:20 2011] Detection parameters:
  Position = (1115.6, 956.4) = 15 3 57.24 -41 45 44.3
  Extent = 1.9" x 1.7", rotation angle = 171 degrees
  Source counts = 57.8 +/- 13.0
  Background counts = 112.2
  Rate = 0.003 +/- 0.0006

[Fri Sep 30 18:17:26 2011] Off-axis axis estimate = 8.34'
[Fri Sep 30 18:19:02 2011] Using EEF radius (= 3.07 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 18:19:02 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 18:19:02 2011] Initial guess for spatial extent in simple fitting = 3.07"
[Fri Sep 30 18:19:02 2011] source mask rpix=6.2, npix_max = 181, mask sum = 169, frac = 0.930
[Fri Sep 30 18:19:02 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 3.07"
[Fri Sep 30 18:19:03 2011] fullrun_ccd2_acisf03838_pi14-548_cl_pass0_src5.ximg exists
[Fri Sep 30 18:19:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03838_pi14-548_cl_pass0_src5.csv
[Fri Sep 30 18:19:03 2011] fullrun_ccd2_acisf03838_pi14-548_cl_pass0_src5_1.ximg exists
[Fri Sep 30 18:19:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03838_pi14-548_cl_pass0_src5.csv
[Fri Sep 30 18:19:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03838_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03838_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 18:19:04 2011] fullrun_ccd2_acisf03838_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Fri Sep 30 18:19:04 2011] fullrun_ccd2_acisf03838_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Sep 30 18:19:04 2011] Fit fullrun_ccd2_acisf03838_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Sep 30 18:19:21 2011] Spatial fit model total counts = 314.702000, observed total counts = 315.000000
[Fri Sep 30 18:19:21 2011] Offset between fit and detection position for source 9 = 1.560308 pixels
[Fri Sep 30 18:19:21 2011] 313.956950 total counts/ 305.919000 bgd. counts: snr = 0.459560
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.560308 pixels
  Position = (1114.7, 955.1) = 15 3 57.30 -41 45 45.2
  Extent = 0.8" x 0.8", rotation angle = 0
  Source counts = 8.0 +/- 17.7
  Background counts = 305.9
  Rate = 0.0004 +/- 0.0009
  Deleting source due to low Poisson probability