[Fri Sep 30 18:17:21 2011] Detection parameters:
  Position = (878.1, 188.5) = 15 4 7.68 -41 52 2.1
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 11.8 +/- 4.5
  Background counts = 8.2
  Rate = 0.0006 +/- 0.0002

[Fri Sep 30 18:17:26 2011] Off-axis axis estimate = 1.75'
[Fri Sep 30 18:19:02 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 18:19:02 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Fri Sep 30 18:19:02 2011] source mask rpix=0.8, npix_max = 7, mask sum = 5, frac = 0.707
[Fri Sep 30 18:19:02 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 0.41"
[Fri Sep 30 18:19:04 2011] fullrun_ccd2_acisf03838_pi14-548_cl_pass0_src27.ximg exists
[Fri Sep 30 18:19:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03838_pi14-548_cl_pass0_src27.csv
[Fri Sep 30 18:19:04 2011] fullrun_ccd2_acisf03838_pi14-548_cl_pass0_src27_1.ximg exists
[Fri Sep 30 18:19:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03838_pi14-548_cl_pass0_src27.csv
[Fri Sep 30 18:19:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03838_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03838_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 18:19:04 2011] fullrun_ccd2_acisf03838_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Fri Sep 30 18:19:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03838_pi14-548_cl_pass0_tfrozen_src27.csv
[Fri Sep 30 18:19:04 2011] fullrun_ccd2_acisf03838_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Sep 30 18:19:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03838_pi14-548_cl_pass0_tfrozen_src27.csv
[Fri Sep 30 18:19:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03838_pi14-548_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03838_pi14-548_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 18:19:21 2011] Source 20 is offset by 2.935092 and 1.187720 pixels which is larger than
2 X fitted extent = 0.523468 x 0.523468, not incorporating fit results
[Fri Sep 30 18:19:21 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 18:19:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 18:19:21 2011] Assessing source extent using major
[Fri Sep 30 18:19:21 2011] Source does appear to be extended
[Fri Sep 30 18:19:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 18:19:21 2011] Deleting source due to low Poisson probability 0.9