[Sat Oct 8 22:49:24 2011] Detection parameters: Position = (920.4, 821.8) = 15 13 41.37 -59 0 45.9 Extent = 0.5" x 0.5", rotation angle = 114 degrees Source counts = 665.2 +/- 30.9 Background counts = 289.8 Rate = 0.03 +/- 0.002 [Sat Oct 8 22:49:27 2011] Off-axis axis estimate = 7.25' [Sat Oct 8 22:51:01 2011] Using EEF radius (= 2.33 ")to estimate initial spatial extent for simple fitting [Sat Oct 8 22:51:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Oct 8 22:51:01 2011] Initial guess for spatial extent in simple fitting = 2.33" [Sat Oct 8 22:51:01 2011] source mask rpix=4.7, npix_max = 109, mask sum = 105, frac = 0.957 [Sat Oct 8 22:51:01 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.33" [Sat Oct 8 22:51:03 2011] fullrun_ccd1_acisf03833_pi14-548_cl_pass0_src3.ximg exists [Sat Oct 8 22:51:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03833_pi14-548_cl_pass0_src3.csv [Sat Oct 8 22:51:03 2011] fullrun_ccd1_acisf03833_pi14-548_cl_pass0_src3_1.ximg exists [Sat Oct 8 22:51:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03833_pi14-548_cl_pass0_src3.csv [Sat Oct 8 22:51:03 2011] It looks like the fit did not converge You should probably delete fullrun_ccd1_acisf03833_pi14-548_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_ccd1_acisf03833_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Oct 8 22:51:04 2011] fullrun_ccd1_acisf03833_pi14-548_cl_pass0_tfrozen_src3.ximg exists [Sat Oct 8 22:51:04 2011] fullrun_ccd1_acisf03833_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists [Sat Oct 8 22:51:04 2011] Fit fullrun_ccd1_acisf03833_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly [Sat Oct 8 22:51:20 2011] Spatial fit model total counts = 1101.810000, observed total counts = 1101.000000 [Sat Oct 8 22:51:20 2011] Offset between fit and detection position for source 2 = 1.436488 pixels [Sat Oct 8 22:51:20 2011] 1096.741000 total counts/ 401.968000 bgd. counts: snr = 34.653507 Spatial fit parameters: Offset between fit and detection position for source 2 = 1.436488 pixels Position = (921.1, 823.1) = 15 13 41.36 -59 0 45.5 Extent = 2.4 (2.2-2.6)", rotation angle = 0 Source counts = 694.8 +/- 33.1 Background counts = 402.0 Rate = 0.04 +/- 0.002 [Sat Oct 8 22:51:20 2011] Vigneting correction estimate = 1.000000 [Sat Oct 8 22:51:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Oct 8 22:51:20 2011] Assessing source extent using major axis lower bound [Sat Oct 8 22:51:20 2011] Source does appear to be extended [Sat Oct 8 22:51:20 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Oct 8 22:51:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Oct 8 22:51:46 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Oct 8 22:51:46 2011] Initial guess for spatial extent in simple fitting = 2.35" [Sat Oct 8 22:51:46 2011] source mask rpix=4.8, npix_max = 111, mask sum = 93, frac = 0.833 [Sat Oct 8 22:51:46 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 2.35" [Sat Oct 8 22:51:46 2011] fullrun_ccd1_acisf03833_pi14-548_cl_pass1_src3.ximg exists [Sat Oct 8 22:51:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03833_pi14-548_cl_pass1_src3.csv [Sat Oct 8 22:51:46 2011] fullrun_ccd1_acisf03833_pi14-548_cl_pass1_src3_1.ximg exists [Sat Oct 8 22:51:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03833_pi14-548_cl_pass1_src3.csv [Sat Oct 8 22:51:46 2011] It looks like the fit did not converge You should probably delete fullrun_ccd1_acisf03833_pi14-548_cl_pass1_src3_1.ximg Either tweak this fit manually starting from fullrun_ccd1_acisf03833_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Oct 8 22:51:47 2011] fullrun_ccd1_acisf03833_pi14-548_cl_pass1_tfrozen_src3.ximg exists [Sat Oct 8 22:51:47 2011] fullrun_ccd1_acisf03833_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists [Sat Oct 8 22:51:47 2011] Fit fullrun_ccd1_acisf03833_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly [Sat Oct 8 22:52:01 2011] Warning, spatial fit 3 centroid is now closest to src. 22 [Sat Oct 8 22:52:01 2011] Vigneting correction estimate = 1.000000 [Sat Oct 8 22:52:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Oct 8 22:52:01 2011] Assessing source extent using major axis lower bound [Sat Oct 8 22:52:01 2011] Source does appear to be extended [Sat Oct 8 22:52:01 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Oct 8 22:52:46 2011] Not overwriting source region fullrun_ccd1_acisf03833_pi14-548_pass1_cl_src2_src.reg [Sat Oct 8 22:52:46 2011] Extracting stamp from image fullrun_ccd1_acisf03833_pi14-548_cl_sm2.00.img.gz, (814, 715) - (1029, 931) [Sat Oct 8 22:52:46 2011] Writing fullrun_ccd1_acisf03833_pi14-548_pass1_cl_src2.gif [Sat Oct 8 22:52:57 2011] ../../acisf03833/products/events/fullrun_ccd1_acisf03833_pi14-548_pass1_cl_src2_src.evt and ../../acisf03833/products/events/fullrun_ccd1_acisf03833_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create [Sat Oct 8 22:52:58 2011] Size of ../../acisf03833/products/events/fullrun_ccd1_acisf03833_pi14-548_pass1_cl_src2_src.evt.gz[events] = 1209 counts [Sat Oct 8 22:52:58 2011] Mean chipx,y = (721.26, 636.61) [Sat Oct 8 22:52:58 2011] Mean tdetx,y = (4495.39, 4828.26) [Sat Oct 8 22:52:58 2011] chipx,y range = (687.00-755.00, 603.00-671.00) [Sat Oct 8 22:52:58 2011] Size of ../../acisf03833/products/events/fullrun_ccd1_acisf03833_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 1674 counts [Sat Oct 8 22:52:58 2011] ../../acisf03833/products/images/fullrun_ccd1_acisf03833_pi14-548_pass1_cl_src2_src.img and ../../acisf03833/products/images/fullrun_ccd1_acisf03833_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create [Sat Oct 8 22:52:58 2011] ../../acisf03833/products/spectra/fullrun_ccd1_acisf03833_pi14-548_pass1_cl_src2_src.pi and ../../acisf03833/products/spectra/fullrun_ccd1_acisf03833_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create [Sat Oct 8 22:53:00 2011] ../../acisf03833/products/lightcurves/fullrun_ccd1_acisf03833_pi14-548_pass1_cl_src2_src.lc and ../../acisf03833/products/lightcurves/fullrun_ccd1_acisf03833_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create [Sat Oct 8 22:55:22 2011] Keeping rmf generated by specextract [Sat Oct 8 22:55:22 2011] 177.736 [Sat Oct 8 22:57:00 2011] Updating aperture counts using extracted products [Sat Oct 8 22:57:00 2011] Error reading totcts from fullrun_ccd1_acisf03833_pi14-548_pass1_cl_src2_src.pi.gz [Sat Oct 8 22:57:01 2011] Calculating source flux in energy range 0.30-8.00 [Sat Oct 8 22:57:01 2011] Using photon index=1.80, rate=0.0363, arf fullrun_ccd1_acisf03833_pi14-548_pass1_cl_src2.arf [Sat Oct 8 22:57:01 2011] Assuming count rate is from the 0.20-8.00 bandpass [Sat Oct 8 22:57:01 2011] Updating source flux to 6.6e-13 [Sat Oct 8 22:58:56 2011] Reading fit data from acisf03833/analysis//spectral/fullrun_ccd1_acisf03833_pi14-548_pass1_cl_src2_pl.csv [Sat Oct 8 22:58:56 2011] Spectral fit parameter nH value = 1.18195e+22 [Sat Oct 8 22:58:56 2011] Spectral fit parameter PhoIndex value = 6.99642 [Sat Oct 8 22:58:56 2011] Failed to get F(0.3-8.0) from acisf03833/analysis//spectral/fullrun_ccd1_acisf03833_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected [Sat Oct 8 22:58:56 2011] Calculating source flux in energy range 0.30-8.00 [Sat Oct 8 22:58:56 2011] Using Nh = 1.2e+22, photon index=7.00, rate=0.0363, arf fullrun_ccd1_acisf03833_pi14-548_pass1_cl_src2.arf [Sat Oct 8 22:58:56 2011] Assuming count rate is from the 0.20-8.00 bandpass [Sat Oct 8 22:58:56 2011] Updating source flux to 2.2e-13