[Thu Sep 29 05:27:12 2011] Detection parameters:
  Position = (699.1, 502.6) = 5 35 46.29 -69 18 6.8
  Extent = 1.5" x 0.9", rotation angle = 159 degrees
  Source counts = 41.6 +/- 8.1
  Background counts = 23.4
  Rate = 0.0009 +/- 0.0002

[Thu Sep 29 05:27:15 2011] Off-axis axis estimate = 3.08'
[Thu Sep 29 05:28:12 2011] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 05:28:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 29 05:28:12 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Thu Sep 29 05:28:12 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.026
[Thu Sep 29 05:28:12 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.60"
[Thu Sep 29 05:28:13 2011] fullrun_ccd7_acisf03830_pi14-548_cl_pass0_src5.ximg exists
[Thu Sep 29 05:28:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03830_pi14-548_cl_pass0_src5.csv
[Thu Sep 29 05:28:13 2011] fullrun_ccd7_acisf03830_pi14-548_cl_pass0_src5_1.ximg exists
[Thu Sep 29 05:28:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03830_pi14-548_cl_pass0_src5.csv
[Thu Sep 29 05:28:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03830_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03830_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 05:28:14 2011] fullrun_ccd7_acisf03830_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Thu Sep 29 05:28:14 2011] fullrun_ccd7_acisf03830_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Sep 29 05:28:14 2011] Fit fullrun_ccd7_acisf03830_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Sep 29 05:28:26 2011] Spatial fit model total counts = 91.972300, observed total counts = 92.000000
[Thu Sep 29 05:28:26 2011] Offset between fit and detection position for source 4 = 2.318296 pixels
[Thu Sep 29 05:28:26 2011] 91.276400 total counts/ 58.341500 bgd. counts: snr = 4.311889
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 2.318296 pixels
  Position = (701.1, 503.8) = 5 35 46.15 -69 18 6.4
  Extent = 1.5 (1.5-1.5)", rotation angle = 0
  Source counts = 32.9 +/- 9.6
  Background counts = 58.3
  Rate = 0.0007 +/- 0.0002
[Thu Sep 29 05:28:26 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 05:28:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 05:28:26 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 05:28:26 2011] Source does appear to be extended
[Thu Sep 29 05:28:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 05:28:49 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 05:28:49 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 29 05:28:49 2011] Initial guess for spatial extent in simple fitting = 1.49"
[Thu Sep 29 05:28:49 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.990
[Thu Sep 29 05:28:49 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 1.49"
[Thu Sep 29 05:28:50 2011] fullrun_ccd7_acisf03830_pi14-548_cl_pass1_src5.ximg exists
[Thu Sep 29 05:28:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03830_pi14-548_cl_pass1_src5.csv
[Thu Sep 29 05:28:50 2011] fullrun_ccd7_acisf03830_pi14-548_cl_pass1_src5_1.ximg exists
[Thu Sep 29 05:28:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03830_pi14-548_cl_pass1_src5.csv
[Thu Sep 29 05:28:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03830_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03830_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 05:28:50 2011] fullrun_ccd7_acisf03830_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Thu Sep 29 05:28:50 2011] fullrun_ccd7_acisf03830_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Sep 29 05:28:50 2011] Fit fullrun_ccd7_acisf03830_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Sep 29 05:29:00 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 13.974843 pixels away
[Thu Sep 29 05:29:00 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 05:29:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 05:29:00 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 05:29:00 2011] Source does appear to be extended
[Thu Sep 29 05:29:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 05:30:37 2011] Not overwriting source region fullrun_ccd7_acisf03830_pi14-548_pass1_cl_src4_src.reg
[Thu Sep 29 05:30:37 2011] Extracting stamp from image fullrun_ccd7_acisf03830_pi14-548_cl_sm2.00.img.gz, (633, 436) - (769, 572)
[Thu Sep 29 05:30:37 2011] Writing fullrun_ccd7_acisf03830_pi14-548_pass1_cl_src4.gif
[Thu Sep 29 05:31:06 2011] ../../acisf03830/products/events/fullrun_ccd7_acisf03830_pi14-548_pass1_cl_src4_src.evt and ../../acisf03830/products/events/fullrun_ccd7_acisf03830_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Thu Sep 29 05:31:06 2011] Size of ../../acisf03830/products/events/fullrun_ccd7_acisf03830_pi14-548_pass1_cl_src4_src.evt.gz[events] = 148 counts
[Thu Sep 29 05:31:06 2011] Mean chipx,y = (539.72, 346.80)
[Thu Sep 29 05:31:06 2011] Mean tdetx,y = (4456.72, 2048.80)
[Thu Sep 29 05:31:06 2011] chipx,y range = (516.00-564.00, 321.00-375.00)
[Thu Sep 29 05:31:07 2011] Size of ../../acisf03830/products/events/fullrun_ccd7_acisf03830_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 601 counts
[Thu Sep 29 05:31:07 2011] ../../acisf03830/products/images/fullrun_ccd7_acisf03830_pi14-548_pass1_cl_src4_src.img and ../../acisf03830/products/images/fullrun_ccd7_acisf03830_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Thu Sep 29 05:31:07 2011] ../../acisf03830/products/spectra/fullrun_ccd7_acisf03830_pi14-548_pass1_cl_src4_src.pi and ../../acisf03830/products/spectra/fullrun_ccd7_acisf03830_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Thu Sep 29 05:31:07 2011] Not generating rmf since there are only 32 counts
[Thu Sep 29 05:31:15 2011] ../../acisf03830/products/lightcurves/fullrun_ccd7_acisf03830_pi14-548_pass1_cl_src4_src.lc and ../../acisf03830/products/lightcurves/fullrun_ccd7_acisf03830_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Thu Sep 29 05:32:44 2011] 229.845
[Thu Sep 29 05:32:58 2011] Updating aperture counts using extracted products
[Thu Sep 29 05:32:58 2011] Error reading totcts from fullrun_ccd7_acisf03830_pi14-548_pass1_cl_src4_src.pi.gz
[Thu Sep 29 05:32:59 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 05:32:59 2011] Using photon index=1.80, rate=0.000729, arf fullrun_ccd7_acisf03830_pi14-548_pass1_cl_src4.arf
[Thu Sep 29 05:32:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 05:32:59 2011] Updating source flux to 6.1e-15
[Thu Sep 29 05:33:05 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting