[Sun Apr 29 05:05:01 2012] Detection parameters:
  Position = (529.2, 319.4) = 18 3 30.90 -29 55 33.4
  Extent = 0.6" x 0.5", rotation angle = 56 degrees
  Source counts = 12.3 +/- 3.7
  Background counts = 1.7
  Rate = 0.0001 +/- 4e-05

[Sun Apr 29 05:05:08 2012] Off-axis axis estimate = 3.85'
[Sun Apr 29 09:51:36 2012] Using EEF radius (= 0.79 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 09:51:36 2012] Initial guess for spatial extent in simple fitting = 0.79"
[Sun Apr 29 09:51:36 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.137
[Sun Apr 29 09:51:36 2012] Giving source the simple spatial ID 80 for pass 0, mean size = 0.79"
[Sun Apr 29 11:36:56 2012] fullrun_ccd3_acisf03780_pi14-548_cl_pass0_src80.ximg exists
[Sun Apr 29 11:36:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03780_pi14-548_cl_pass0_src80.csv
[Sun Apr 29 11:36:56 2012] fullrun_ccd3_acisf03780_pi14-548_cl_pass0_src80_1.ximg exists
[Sun Apr 29 11:36:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03780_pi14-548_cl_pass0_src80.csv
[Sun Apr 29 11:36:56 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03780_pi14-548_cl_pass0_src80_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03780_pi14-548_cl_pass0_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 11:36:56 2012] fullrun_ccd3_acisf03780_pi14-548_cl_pass0_tfrozen_src80.ximg exists
[Sun Apr 29 11:36:56 2012] fullrun_ccd3_acisf03780_pi14-548_cl_pass0_tfrozen_src80_1.ximg exists
[Sun Apr 29 11:36:56 2012] Fit fullrun_ccd3_acisf03780_pi14-548_cl_pass0_tfrozen_src80 appears to have run properly
[Sun Apr 29 12:25:38 2012] Spatial fit model total counts = 20.825200, observed total counts = 21.000000
[Sun Apr 29 12:25:38 2012] Offset between fit and detection position for source 56 = 0.644612 pixels
[Sun Apr 29 12:25:38 2012] 20.504420 total counts/ 9.458420 bgd. counts: snr = 3.591664
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 0.644612 pixels
  Position = (529.7, 319.8) = 18 3 30.90 -29 55 33.5
  Extent = 0.4 (0.3-0.7)", rotation angle = 0
  Source counts = 11.0 +/- 4.5
  Background counts = 9.5
  Rate = 0.0001 +/- 5e-05
[Sun Apr 29 12:25:38 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 12:25:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 12:25:38 2012] Assessing source extent using major axis lower bound
[Sun Apr 29 12:25:38 2012] Source does appear to be extended
[Sun Apr 29 12:25:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr 29 16:39:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Apr 29 16:39:04 2012] Initial guess for spatial extent in simple fitting = 0.44"
[Sun Apr 29 16:39:04 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.157
[Sun Apr 29 16:39:04 2012] Giving source the simple spatial ID 79 for pass 1, mean size = 0.44"
[Sun Apr 29 18:14:06 2012] fullrun_ccd3_acisf03780_pi14-548_cl_pass1_src79.ximg exists
[Sun Apr 29 18:14:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03780_pi14-548_cl_pass1_src79.csv
[Sun Apr 29 18:14:06 2012] fullrun_ccd3_acisf03780_pi14-548_cl_pass1_src79_1.ximg exists
[Sun Apr 29 18:14:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03780_pi14-548_cl_pass1_src79.csv
[Sun Apr 29 18:14:06 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03780_pi14-548_cl_pass1_src79_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03780_pi14-548_cl_pass1_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 18:14:07 2012] fullrun_ccd3_acisf03780_pi14-548_cl_pass1_tfrozen_src79.ximg exists
[Sun Apr 29 18:14:07 2012] fullrun_ccd3_acisf03780_pi14-548_cl_pass1_tfrozen_src79_1.ximg exists
[Sun Apr 29 18:14:07 2012] Fit fullrun_ccd3_acisf03780_pi14-548_cl_pass1_tfrozen_src79 appears to have run properly
[Sun Apr 29 18:57:12 2012] Spatial fit model total counts = 20.911500, observed total counts = 21.000000
[Sun Apr 29 18:57:12 2012] Offset between fit and detection position for source 56 = 0.080514 pixels
[Sun Apr 29 18:57:12 2012] 20.549170 total counts/ 9.826670 bgd. counts: snr = 3.420526
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 0.080514 pixels
  Position = (529.7, 319.9) = 18 3 30.90 -29 55 33.5
  Extent = 0.4 (0.3-0.7)", rotation angle = 0
  Source counts = 10.7 +/- 4.5
  Background counts = 9.8
  Rate = 0.0001 +/- 5e-05
[Sun Apr 29 18:57:12 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 18:57:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 18:57:12 2012] Assessing source extent using major axis lower bound
[Sun Apr 29 18:57:12 2012] Source does appear to be extended
[Sun Apr 29 18:57:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr 29 19:38:10 2012] Writing source region out to fullrun_ccd3_acisf03780_pi14-548_pass1_cl_src56_src.reg
[Sun Apr 29 19:38:10 2012] Extracting stamp from image fullrun_ccd3_acisf03780_pi14-548_cl_sm2.00.img.gz, (511, 302) - (548, 338)
[Sun Apr 29 19:38:10 2012] Writing fullrun_ccd3_acisf03780_pi14-548_pass1_cl_src56.gif
[Sun Apr 29 19:52:30 2012] Size of ../../acisf03780/products/events/fullrun_ccd3_acisf03780_pi14-548_pass1_cl_src56_src.evt.gz[events] = 12 counts
[Sun Apr 29 19:52:30 2012] Mean chipx,y = (505.92, 892.08)
[Sun Apr 29 19:52:30 2012] Mean tdetx,y = (4239.92, 3566.92)
[Sun Apr 29 19:52:30 2012] chipx,y range = (490.00-524.00, 874.00-907.00)
[Sun Apr 29 19:52:30 2012] Size of ../../acisf03780/products/events/fullrun_ccd3_acisf03780_pi14-548_pass1_cl_src56_bgd.evt.gz[events] = 12 counts
[Sun Apr 29 19:52:31 2012] Not generating rmf since there are only 10 counts
[Sun Apr 29 19:52:31 2012] arf not found, will run specextract
[Sun Apr 29 19:52:33 2012] ../../acisf03780/products/spectra/fullrun_ccd3_acisf03780_pi14-548_pass1_cl_src56_bkg.pi not found
[Sun Apr 29 19:52:33 2012] ../../acisf03780/products/spectra/fullrun_ccd3_acisf03780_pi14-548_pass1_cl_src56.warf not found
[Sun Apr 29 19:52:33 2012] ../../acisf03780/products/spectra/fullrun_ccd3_acisf03780_pi14-548_pass1_cl_src56.wrmf not found
[Sun Apr 29 19:52:33 2012] Removal of ../../acisf03780/products/spectra/fullrun_ccd3_acisf03780_pi14-548_pass1_cl_src56.soff failed
[Sun Apr 29 19:52:33 2012] Failed to rename ../../acisf03780/products/spectra/fullrun_ccd3_acisf03780_pi14-548_pass1_cl_src56_grp.pi to ../../acisf03780/products/spectra/fullrun_ccd3_acisf03780_pi14-548_pass1_cl_src56_src.pi
[Sun Apr 29 19:58:58 2012] No arf file found
[Sun Apr 29 20:00:49 2012] Updating aperture counts using extracted products
[Sun Apr 29 20:00:49 2012] Error reading totcts from fullrun_ccd3_acisf03780_pi14-548_pass1_cl_src56_src.pi
[Sun Apr 29 20:00:49 2012] No arf file for this source, not re-computing flux
[Sun Apr 29 20:01:03 2012] Source 56 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Apr 29 20:01:04 2012] acisf03780/analysis//spectral/fullrun_ccd3_acisf03780_pi14-548_pass1_cl_src56_pl.csv not found, spectral fit skipped or did not complete