[Fri Oct 28 03:19:10 2011] Detection parameters:
  Position = (838.4, 625.7) = 0 52 33.74 -26 32 5.1
  Extent = 0.8" x 0.7", rotation angle = 174 degrees
  Source counts = 15.7 +/- 4.4
  Background counts = 3.3
  Rate = 0.0003 +/- 8e-05

[Fri Oct 28 03:19:11 2011] Off-axis axis estimate = 4.04'
[Fri Oct 28 03:20:06 2011] Using EEF radius (= 0.84 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 03:20:06 2011] Initial guess for spatial extent in simple fitting = 0.84"
[Fri Oct 28 03:20:06 2011] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.278
[Fri Oct 28 03:20:06 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 0.84"
[Fri Oct 28 03:20:07 2011] fullrun_ccd7_acisf03777_pi14-548_cl_pass0_src19.ximg exists
[Fri Oct 28 03:20:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03777_pi14-548_cl_pass0_src19.csv
[Fri Oct 28 03:20:07 2011] fullrun_ccd7_acisf03777_pi14-548_cl_pass0_src19_1.ximg exists
[Fri Oct 28 03:20:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03777_pi14-548_cl_pass0_src19.csv
[Fri Oct 28 03:20:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03777_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03777_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 03:20:07 2011] fullrun_ccd7_acisf03777_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Fri Oct 28 03:20:07 2011] fullrun_ccd7_acisf03777_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Fri Oct 28 03:20:07 2011] Fit fullrun_ccd7_acisf03777_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Fri Oct 28 03:20:19 2011] Spatial fit model total counts = 23.960100, observed total counts = 24.000000
[Fri Oct 28 03:20:19 2011] Offset between fit and detection position for source 18 = 0.714193 pixels
[Fri Oct 28 03:20:19 2011] 24.140800 total counts/ 12.578400 bgd. counts: snr = 3.260133
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.714193 pixels
  Position = (837.9, 626.2) = 0 52 33.78 -26 32 5.1
  Extent = 0.6 (0.4-1.0)", rotation angle = 0
  Source counts = 11.6 +/- 4.9
  Background counts = 12.6
  Rate = 0.0002 +/- 9e-05
[Fri Oct 28 03:20:19 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 03:20:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 03:20:19 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 03:20:19 2011] Source does appear to be extended
[Fri Oct 28 03:20:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 03:20:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 03:20:40 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Fri Oct 28 03:20:40 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.081
[Fri Oct 28 03:20:40 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 0.57"
[Fri Oct 28 03:20:41 2011] fullrun_ccd7_acisf03777_pi14-548_cl_pass1_src19.ximg exists
[Fri Oct 28 03:20:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03777_pi14-548_cl_pass1_src19.csv
[Fri Oct 28 03:20:41 2011] fullrun_ccd7_acisf03777_pi14-548_cl_pass1_src19_1.ximg exists
[Fri Oct 28 03:20:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03777_pi14-548_cl_pass1_src19.csv
[Fri Oct 28 03:20:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03777_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03777_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 03:20:41 2011] fullrun_ccd7_acisf03777_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Fri Oct 28 03:20:41 2011] fullrun_ccd7_acisf03777_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Fri Oct 28 03:20:41 2011] Fit fullrun_ccd7_acisf03777_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Fri Oct 28 03:20:53 2011] Spatial fit model total counts = 23.019500, observed total counts = 23.000000
[Fri Oct 28 03:20:53 2011] Offset between fit and detection position for source 18 = 0.035732 pixels
[Fri Oct 28 03:20:53 2011] 22.723600 total counts/ 11.377200 bgd. counts: snr = 3.363879
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.035732 pixels
  Position = (837.9, 626.2) = 0 52 33.78 -26 32 5.1
  Extent = 0.6 (0.4-1.1)", rotation angle = 0
  Source counts = 11.3 +/- 4.8
  Background counts = 11.4
  Rate = 0.0002 +/- 9e-05
[Fri Oct 28 03:20:53 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 03:20:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 03:20:53 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 03:20:53 2011] Source does appear to be extended
[Fri Oct 28 03:20:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 03:23:39 2011] Not overwriting source region fullrun_ccd7_acisf03777_pi14-548_pass1_cl_src18_src.reg
[Fri Oct 28 03:23:39 2011] Extracting stamp from image fullrun_ccd7_acisf03777_pi14-548_cl_sm2.00.img.gz, (812, 600) - (864, 652)
[Fri Oct 28 03:23:39 2011] Writing fullrun_ccd7_acisf03777_pi14-548_pass1_cl_src18.gif
[Fri Oct 28 03:24:34 2011] ../../acisf03777/products/events/fullrun_ccd7_acisf03777_pi14-548_pass1_cl_src18_src.evt and ../../acisf03777/products/events/fullrun_ccd7_acisf03777_pi14-548_pass1_cl_src18_bgd.evt exist, delete to re-create
[Fri Oct 28 03:24:34 2011] Size of ../../acisf03777/products/events/fullrun_ccd7_acisf03777_pi14-548_pass1_cl_src18_src.evt.gz[events] = 15 counts
[Fri Oct 28 03:24:34 2011] Mean chipx,y = (601.13, 822.47)
[Fri Oct 28 03:24:34 2011] Mean tdetx,y = (4518.13, 2524.47)
[Fri Oct 28 03:24:34 2011] chipx,y range = (587.00-618.00, 805.00-835.00)
[Fri Oct 28 03:24:34 2011] Size of ../../acisf03777/products/events/fullrun_ccd7_acisf03777_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 29 counts
[Fri Oct 28 03:24:34 2011] ../../acisf03777/products/images/fullrun_ccd7_acisf03777_pi14-548_pass1_cl_src18_src.img and ../../acisf03777/products/images/fullrun_ccd7_acisf03777_pi14-548_pass1_cl_src18_bgd.img exist, delete to re-create
[Fri Oct 28 03:24:34 2011] ../../acisf03777/products/spectra/fullrun_ccd7_acisf03777_pi14-548_pass1_cl_src18_src.pi and ../../acisf03777/products/spectra/fullrun_ccd7_acisf03777_pi14-548_pass1_cl_src18_bgd.pi exist, delete to re-create
[Fri Oct 28 03:24:34 2011] Not generating rmf since there are only 11 counts
[Fri Oct 28 03:24:36 2011] ../../acisf03777/products/lightcurves/fullrun_ccd7_acisf03777_pi14-548_pass1_cl_src18_src.lc and ../../acisf03777/products/lightcurves/fullrun_ccd7_acisf03777_pi14-548_pass1_cl_src18_bgd.lc exist, delete to re-create
[Fri Oct 28 03:25:01 2011] 221.391
[Fri Oct 28 03:25:05 2011] Updating aperture counts using extracted products
[Fri Oct 28 03:25:05 2011] Error reading totcts from fullrun_ccd7_acisf03777_pi14-548_pass1_cl_src18_src.pi.gz
[Fri Oct 28 03:25:06 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 03:25:06 2011] Using photon index=1.80, rate=0.000206, arf fullrun_ccd7_acisf03777_pi14-548_pass1_cl_src18.arf
[Fri Oct 28 03:25:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 03:25:06 2011] Updating source flux to 1.5e-15
[Fri Oct 28 03:25:23 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting