[Fri Oct 28 03:19:07 2011] Detection parameters:
  Position = (886.1, 1014.4) = 0 52 31.43 -26 37 25.0
  Extent = 0.7" x 0.5", rotation angle = 57 degrees
  Source counts = 16.7 +/- 4.2
  Background counts = 1.3
  Rate = 0.0003 +/- 8e-05

[Fri Oct 28 03:19:08 2011] Off-axis axis estimate = 3.67'
[Fri Oct 28 03:20:04 2011] Using EEF radius (= 0.74 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 03:20:04 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Fri Oct 28 03:20:04 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.003
[Fri Oct 28 03:20:04 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.74"
[Fri Oct 28 03:20:05 2011] fullrun_ccd6_acisf03777_pi14-548_cl_pass0_src13.ximg exists
[Fri Oct 28 03:20:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03777_pi14-548_cl_pass0_src13.csv
[Fri Oct 28 03:20:05 2011] fullrun_ccd6_acisf03777_pi14-548_cl_pass0_src13_1.ximg exists
[Fri Oct 28 03:20:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03777_pi14-548_cl_pass0_src13.csv
[Fri Oct 28 03:20:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf03777_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf03777_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 03:20:06 2011] fullrun_ccd6_acisf03777_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Fri Oct 28 03:20:06 2011] fullrun_ccd6_acisf03777_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Oct 28 03:20:06 2011] Fit fullrun_ccd6_acisf03777_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Oct 28 03:20:17 2011] Spatial fit model total counts = 28.674400, observed total counts = 29.000000
[Fri Oct 28 03:20:17 2011] Offset between fit and detection position for source 9 = 1.482221 pixels
[Fri Oct 28 03:20:17 2011] 28.699033 total counts/ 0.376333 bgd. counts: snr = 46.168791
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.482221 pixels
  Position = (884.8, 1015.3) = 0 52 31.50 -26 37 24.9
  Extent = 1.2 (0.9-1.4)", rotation angle = 0
  Source counts = 28.3 +/- 5.4
  Background counts = 0.4
  Rate = 0.0005 +/- 0.0001
[Fri Oct 28 03:20:17 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 03:20:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 03:20:17 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 03:20:17 2011] Source does appear to be extended
[Fri Oct 28 03:20:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 03:20:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 03:20:38 2011] Initial guess for spatial extent in simple fitting = 1.17"
[Fri Oct 28 03:20:38 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.087
[Fri Oct 28 03:20:38 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 1.17"
[Fri Oct 28 03:20:39 2011] fullrun_ccd6_acisf03777_pi14-548_cl_pass1_src13.ximg exists
[Fri Oct 28 03:20:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03777_pi14-548_cl_pass1_src13.csv
[Fri Oct 28 03:20:39 2011] fullrun_ccd6_acisf03777_pi14-548_cl_pass1_src13_1.ximg exists
[Fri Oct 28 03:20:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03777_pi14-548_cl_pass1_src13.csv
[Fri Oct 28 03:20:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf03777_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf03777_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 03:20:40 2011] fullrun_ccd6_acisf03777_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Fri Oct 28 03:20:40 2011] fullrun_ccd6_acisf03777_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Oct 28 03:20:40 2011] Fit fullrun_ccd6_acisf03777_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Oct 28 03:20:50 2011] Spatial fit model total counts = 27.650300, observed total counts = 29.000000
[Fri Oct 28 03:20:50 2011] Offset between fit and detection position for source 9 = 0.161590 pixels
[Fri Oct 28 03:20:50 2011] 27.728782 total counts/ 0.552382 bgd. counts: snr = 36.565555
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.161590 pixels
  Position = (884.7, 1015.3) = 0 52 31.50 -26 37 24.8
  Extent = 1.2 (0.8-1.4)", rotation angle = 0
  Source counts = 27.2 +/- 5.3
  Background counts = 0.6
  Rate = 0.0005 +/- 0.0001
[Fri Oct 28 03:20:50 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 03:20:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 03:20:50 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 03:20:50 2011] Source does appear to be extended
[Fri Oct 28 03:20:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 03:22:19 2011] Not overwriting source region fullrun_ccd6_acisf03777_pi14-548_pass1_cl_src9_src.reg
[Fri Oct 28 03:22:19 2011] Extracting stamp from image fullrun_ccd6_acisf03777_pi14-548_cl_sm2.00.img.gz, (832, 962) - (938, 1061)
[Fri Oct 28 03:22:19 2011] Writing fullrun_ccd6_acisf03777_pi14-548_pass1_cl_src9.gif
[Fri Oct 28 03:22:59 2011] ../../acisf03777/products/events/fullrun_ccd6_acisf03777_pi14-548_pass1_cl_src9_src.evt and ../../acisf03777/products/events/fullrun_ccd6_acisf03777_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Fri Oct 28 03:22:59 2011] Size of ../../acisf03777/products/events/fullrun_ccd6_acisf03777_pi14-548_pass1_cl_src9_src.evt.gz[events] = 29 counts
[Fri Oct 28 03:22:59 2011] Mean chipx,y = (994.24, 874.00)
[Fri Oct 28 03:22:59 2011] Mean tdetx,y = (3869.24, 2576.00)
[Fri Oct 28 03:22:59 2011] chipx,y range = (977.00-1014.00, 855.00-897.00)
[Fri Oct 28 03:22:59 2011] Size of ../../acisf03777/products/events/fullrun_ccd6_acisf03777_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 43 counts
[Fri Oct 28 03:22:59 2011] ../../acisf03777/products/images/fullrun_ccd6_acisf03777_pi14-548_pass1_cl_src9_src.img and ../../acisf03777/products/images/fullrun_ccd6_acisf03777_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Fri Oct 28 03:22:59 2011] ../../acisf03777/products/spectra/fullrun_ccd6_acisf03777_pi14-548_pass1_cl_src9_src.pi and ../../acisf03777/products/spectra/fullrun_ccd6_acisf03777_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Fri Oct 28 03:22:59 2011] Not generating rmf since there are only 27 counts
[Fri Oct 28 03:23:02 2011] ../../acisf03777/products/lightcurves/fullrun_ccd6_acisf03777_pi14-548_pass1_cl_src9_src.lc and ../../acisf03777/products/lightcurves/fullrun_ccd6_acisf03777_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Fri Oct 28 03:23:38 2011] 203.807
[Fri Oct 28 03:25:05 2011] Updating aperture counts using extracted products
[Fri Oct 28 03:25:05 2011] Error reading totcts from fullrun_ccd6_acisf03777_pi14-548_pass1_cl_src9_src.pi.gz
[Fri Oct 28 03:25:05 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 03:25:05 2011] Using photon index=1.80, rate=0.000492, arf fullrun_ccd6_acisf03777_pi14-548_pass1_cl_src9.arf
[Fri Oct 28 03:25:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 03:25:05 2011] Updating source flux to 5.2e-15
[Fri Oct 28 03:25:22 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 28 03:25:23 2011] acisf03777/analysis//spectral/fullrun_ccd6_acisf03777_pi14-548_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete