[Fri Oct 28 03:19:05 2011] Detection parameters:
  Position = (477.7, 338.7) = 0 51 57.29 -26 32 45.0
  Extent = 3.3" x 2.8", rotation angle = 156 degrees
  Source counts = 65.2 +/- 10.0
  Background counts = 34.8
  Rate = 0.001 +/- 0.0002

[Fri Oct 28 03:19:06 2011] Off-axis axis estimate = 10.92'
[Fri Oct 28 03:20:03 2011] Using EEF radius (= 5.30 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 03:20:03 2011] Initial guess for spatial extent in simple fitting = 5.30"
[Fri Oct 28 03:20:03 2011] source mask rpix=10.8, npix_max = 508, mask sum = 529, frac = 1.041
[Fri Oct 28 03:20:03 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 5.30"
[Fri Oct 28 03:20:03 2011] fullrun_ccd3_acisf03777_pi14-548_cl_pass0_src4.ximg exists
[Fri Oct 28 03:20:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03777_pi14-548_cl_pass0_src4.csv
[Fri Oct 28 03:20:03 2011] fullrun_ccd3_acisf03777_pi14-548_cl_pass0_src4_1.ximg exists
[Fri Oct 28 03:20:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03777_pi14-548_cl_pass0_src4.csv
[Fri Oct 28 03:20:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03777_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03777_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 03:20:04 2011] fullrun_ccd3_acisf03777_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Fri Oct 28 03:20:04 2011] fullrun_ccd3_acisf03777_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Oct 28 03:20:04 2011] Fit fullrun_ccd3_acisf03777_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Oct 28 03:20:14 2011] Spatial fit model total counts = 135.468000, observed total counts = 135.000000
[Fri Oct 28 03:20:14 2011] Offset between fit and detection position for source 4 = 1.141573 pixels
[Fri Oct 28 03:20:14 2011] 135.431900 total counts/ 68.380800 bgd. counts: snr = 8.108468
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.141573 pixels
  Position = (478.7, 338.2) = 0 51 57.27 -26 32 45.5
  Extent = 4.5 (2.7-6.3)", rotation angle = 0
  Source counts = 67.1 +/- 11.6
  Background counts = 68.4
  Rate = 0.001 +/- 0.0002
[Fri Oct 28 03:20:14 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 03:20:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 03:20:14 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 03:20:14 2011] Source does appear to be extended
[Fri Oct 28 03:20:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 03:20:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 03:20:37 2011] Initial guess for spatial extent in simple fitting = 4.51"
[Fri Oct 28 03:20:37 2011] source mask rpix=9.2, npix_max = 374, mask sum = 361, frac = 0.965
[Fri Oct 28 03:20:37 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 4.51"
[Fri Oct 28 03:20:38 2011] fullrun_ccd3_acisf03777_pi14-548_cl_pass1_src4.ximg exists
[Fri Oct 28 03:20:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03777_pi14-548_cl_pass1_src4.csv
[Fri Oct 28 03:20:38 2011] fullrun_ccd3_acisf03777_pi14-548_cl_pass1_src4_1.ximg exists
[Fri Oct 28 03:20:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03777_pi14-548_cl_pass1_src4.csv
[Fri Oct 28 03:20:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03777_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03777_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 03:20:38 2011] fullrun_ccd3_acisf03777_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Fri Oct 28 03:20:38 2011] fullrun_ccd3_acisf03777_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Oct 28 03:20:38 2011] Fit fullrun_ccd3_acisf03777_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Oct 28 03:20:48 2011] Spatial fit model total counts = 115.324000, observed total counts = 115.000000
[Fri Oct 28 03:20:48 2011] Offset between fit and detection position for source 4 = 0.979738 pixels
[Fri Oct 28 03:20:48 2011] 115.218000 total counts/ 50.735500 bgd. counts: snr = 9.052862
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.979738 pixels
  Position = (478.0, 338.9) = 0 51 57.29 -26 32 45.1
  Extent = 4.4 (2.5-7.8)", rotation angle = 0
  Source counts = 64.5 +/- 10.7
  Background counts = 50.7
  Rate = 0.001 +/- 0.0002
[Fri Oct 28 03:20:48 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 03:20:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 03:20:48 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 03:20:48 2011] Source does appear to be extended
[Fri Oct 28 03:20:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 03:21:46 2011] Not overwriting source region fullrun_ccd3_acisf03777_pi14-548_pass1_cl_src4_src.reg
[Fri Oct 28 03:21:46 2011] Extracting stamp from image fullrun_ccd3_acisf03777_pi14-548_cl_sm2.00.img.gz, (279, 140) - (677, 538)
[Fri Oct 28 03:21:46 2011] Writing fullrun_ccd3_acisf03777_pi14-548_pass1_cl_src4.gif
[Fri Oct 28 03:21:58 2011] ../../acisf03777/products/events/fullrun_ccd3_acisf03777_pi14-548_pass1_cl_src4_src.evt and ../../acisf03777/products/events/fullrun_ccd3_acisf03777_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Fri Oct 28 03:21:58 2011] Size of ../../acisf03777/products/events/fullrun_ccd3_acisf03777_pi14-548_pass1_cl_src4_src.evt.gz[events] = 132 counts
[Fri Oct 28 03:21:58 2011] Mean chipx,y = (456.94, 708.45)
[Fri Oct 28 03:21:58 2011] Mean tdetx,y = (4423.55, 3517.94)
[Fri Oct 28 03:21:58 2011] chipx,y range = (405.00-505.00, 661.00-751.00)
[Fri Oct 28 03:21:58 2011] Size of ../../acisf03777/products/events/fullrun_ccd3_acisf03777_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 537 counts
[Fri Oct 28 03:21:58 2011] ../../acisf03777/products/images/fullrun_ccd3_acisf03777_pi14-548_pass1_cl_src4_src.img and ../../acisf03777/products/images/fullrun_ccd3_acisf03777_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Fri Oct 28 03:21:58 2011] ../../acisf03777/products/spectra/fullrun_ccd3_acisf03777_pi14-548_pass1_cl_src4_src.pi and ../../acisf03777/products/spectra/fullrun_ccd3_acisf03777_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Fri Oct 28 03:21:58 2011] Not generating rmf since there are only 64 counts
[Fri Oct 28 03:22:01 2011] ../../acisf03777/products/lightcurves/fullrun_ccd3_acisf03777_pi14-548_pass1_cl_src4_src.lc and ../../acisf03777/products/lightcurves/fullrun_ccd3_acisf03777_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Fri Oct 28 03:22:11 2011] 159.431
[Fri Oct 28 03:25:04 2011] Updating aperture counts using extracted products
[Fri Oct 28 03:25:04 2011] Error reading totcts from fullrun_ccd3_acisf03777_pi14-548_pass1_cl_src4_src.pi.gz
[Fri Oct 28 03:25:05 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 03:25:05 2011] Using photon index=1.80, rate=0.00117, arf fullrun_ccd3_acisf03777_pi14-548_pass1_cl_src4.arf
[Fri Oct 28 03:25:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 03:25:05 2011] Updating source flux to 1.6e-14
[Fri Oct 28 03:25:15 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting