[Fri Oct  7 18:35:13 2011] Detection parameters:
  Position = (770.2, 1126.5) = 20 14 37.86 41 11 11.5
  Extent = 0.7" x 0.5", rotation angle = 33 degrees
  Source counts = 19.9 +/- 4.6
  Background counts = 1.1
  Rate = 0.0005 +/- 0.0001

[Fri Oct  7 18:35:14 2011] Off-axis axis estimate = 2.89'
[Fri Oct  7 18:36:28 2011] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 18:36:28 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Fri Oct  7 18:36:28 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.840
[Fri Oct  7 18:36:28 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.56"
[Fri Oct  7 18:36:29 2011] fullrun_ccd1_acisf03758_pi14-548_cl_pass0_src13.ximg exists
[Fri Oct  7 18:36:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03758_pi14-548_cl_pass0_src13.csv
[Fri Oct  7 18:36:29 2011] fullrun_ccd1_acisf03758_pi14-548_cl_pass0_src13_1.ximg exists
[Fri Oct  7 18:36:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03758_pi14-548_cl_pass0_src13.csv
[Fri Oct  7 18:36:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf03758_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf03758_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 18:36:30 2011] fullrun_ccd1_acisf03758_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Fri Oct  7 18:36:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03758_pi14-548_cl_pass0_tfrozen_src13.csv
[Fri Oct  7 18:36:30 2011] fullrun_ccd1_acisf03758_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Oct  7 18:36:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03758_pi14-548_cl_pass0_tfrozen_src13.csv
[Fri Oct  7 18:36:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf03758_pi14-548_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf03758_pi14-548_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 18:36:50 2011] Spatial fit model total counts = 20.540200, observed total counts = 23.000000
[Fri Oct  7 18:36:50 2011] Offset between fit and detection position for source 14 = 0.720201 pixels
[Fri Oct  7 18:36:50 2011] 20.672080 total counts/ 1.064580 bgd. counts: snr = 19.003477
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.720201 pixels
  Position = (770.7, 1127.0) = 20 14 37.86 41 11 11.5
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 19.6 +/- 4.5
  Background counts = 1.1
  Rate = 0.0005 +/- 0.0001
[Fri Oct  7 18:36:50 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 18:36:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 18:36:50 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 18:36:50 2011] Source does appear to be extended
[Fri Oct  7 18:36:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 18:37:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 18:37:29 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Fri Oct  7 18:37:29 2011] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.153
[Fri Oct  7 18:37:29 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.67"
[Fri Oct  7 18:37:30 2011] fullrun_ccd1_acisf03758_pi14-548_cl_pass1_src13.ximg exists
[Fri Oct  7 18:37:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03758_pi14-548_cl_pass1_src13.csv
[Fri Oct  7 18:37:30 2011] fullrun_ccd1_acisf03758_pi14-548_cl_pass1_src13_1.ximg exists
[Fri Oct  7 18:37:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03758_pi14-548_cl_pass1_src13.csv
[Fri Oct  7 18:37:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf03758_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf03758_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 18:37:31 2011] fullrun_ccd1_acisf03758_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Fri Oct  7 18:37:31 2011] fullrun_ccd1_acisf03758_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Oct  7 18:37:31 2011] Fit fullrun_ccd1_acisf03758_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Oct  7 18:37:48 2011] Spatial fit model total counts = 21.332200, observed total counts = 23.000000
[Fri Oct  7 18:37:48 2011] Offset between fit and detection position for source 14 = 0.032534 pixels
[Fri Oct  7 18:37:48 2011] 21.414180 total counts/ 1.813780 bgd. counts: snr = 14.553674
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.032534 pixels
  Position = (770.7, 1127.0) = 20 14 37.86 41 11 11.5
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 19.6 +/- 4.6
  Background counts = 1.8
  Rate = 0.0005 +/- 0.0001
[Fri Oct  7 18:37:48 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 18:37:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 18:37:48 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 18:37:48 2011] Source does appear to be extended
[Fri Oct  7 18:37:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 18:44:21 2011] Not overwriting source region fullrun_ccd1_acisf03758_pi14-548_pass1_cl_src14_src.reg
[Fri Oct  7 18:44:21 2011] Extracting stamp from image fullrun_ccd1_acisf03758_pi14-548_cl_sm2.00.img.gz, (739, 1095) - (803, 1159)
[Fri Oct  7 18:44:21 2011] Writing fullrun_ccd1_acisf03758_pi14-548_pass1_cl_src14.gif
[Fri Oct  7 18:45:59 2011] ../../acisf03758/products/events/fullrun_ccd1_acisf03758_pi14-548_pass1_cl_src14_src.evt and ../../acisf03758/products/events/fullrun_ccd1_acisf03758_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Fri Oct  7 18:45:59 2011] Size of ../../acisf03758/products/events/fullrun_ccd1_acisf03758_pi14-548_pass1_cl_src14_src.evt.gz[events] = 21 counts
[Fri Oct  7 18:45:59 2011] Mean chipx,y = (227.43, 825.24)
[Fri Oct  7 18:45:59 2011] Mean tdetx,y = (4306.76, 4334.43)
[Fri Oct  7 18:45:59 2011] chipx,y range = (209.00-243.00, 815.00-846.00)
[Fri Oct  7 18:46:00 2011] Size of ../../acisf03758/products/events/fullrun_ccd1_acisf03758_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 12 counts
[Fri Oct  7 18:46:00 2011] ../../acisf03758/products/images/fullrun_ccd1_acisf03758_pi14-548_pass1_cl_src14_src.img and ../../acisf03758/products/images/fullrun_ccd1_acisf03758_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Fri Oct  7 18:46:00 2011] Not generating rmf since there are only 19 counts
[Fri Oct  7 18:46:00 2011] arf not found, will run specextract
[Fri Oct  7 18:46:01 2011] ../../acisf03758/products/spectra/fullrun_ccd1_acisf03758_pi14-548_pass1_cl_src14_bkg.pi not found
[Fri Oct  7 18:46:01 2011] ../../acisf03758/products/spectra/fullrun_ccd1_acisf03758_pi14-548_pass1_cl_src14.warf not found
[Fri Oct  7 18:46:01 2011] ../../acisf03758/products/spectra/fullrun_ccd1_acisf03758_pi14-548_pass1_cl_src14.wrmf not found
[Fri Oct  7 18:46:01 2011] Removal of ../../acisf03758/products/spectra/fullrun_ccd1_acisf03758_pi14-548_pass1_cl_src14.soff failed
[Fri Oct  7 18:46:01 2011] Failed to rename ../../acisf03758/products/spectra/fullrun_ccd1_acisf03758_pi14-548_pass1_cl_src14_grp.pi to ../../acisf03758/products/spectra/fullrun_ccd1_acisf03758_pi14-548_pass1_cl_src14_src.pi
[Fri Oct  7 18:46:06 2011] ../../acisf03758/products/lightcurves/fullrun_ccd1_acisf03758_pi14-548_pass1_cl_src14_src.lc and ../../acisf03758/products/lightcurves/fullrun_ccd1_acisf03758_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Fri Oct  7 18:49:01 2011] No arf file found
[Fri Oct  7 19:03:14 2011] Updating aperture counts using extracted products
[Fri Oct  7 19:03:14 2011] Error reading totcts from fullrun_ccd1_acisf03758_pi14-548_pass1_cl_src14_src.pi
[Fri Oct  7 19:03:14 2011] No arf file for this source, not re-computing flux
[Fri Oct  7 19:03:21 2011] Source 14 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct  7 19:03:22 2011] acisf03758/analysis//spectral/fullrun_ccd1_acisf03758_pi14-548_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete