[Fri Oct 14 14:36:26 2011] Detection parameters:
  Position = (906.1, 715.4) = 1 58 1.61 37 47 51.8
  Extent = 1.0" x 0.5", rotation angle = 150 degrees
  Source counts = 17.2 +/- 4.5
  Background counts = 2.8
  Rate = 0.0001 +/- 3e-05

[Fri Oct 14 14:36:29 2011] Off-axis axis estimate = 4.83'
[Fri Oct 14 14:39:07 2011] Using EEF radius (= 1.11 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 14:39:07 2011] Initial guess for spatial extent in simple fitting = 1.11"
[Fri Oct 14 14:39:07 2011] source mask rpix=2.3, npix_max = 30, mask sum = 24, frac = 0.785
[Fri Oct 14 14:39:07 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 1.11"
[Fri Oct 14 14:39:10 2011] fullrun_ccd1_acisf03752_pi14-548_cl_pass0_src26.ximg exists
[Fri Oct 14 14:39:10 2011] fullrun_ccd1_acisf03752_pi14-548_cl_pass0_src26_1.ximg exists
[Fri Oct 14 14:39:10 2011] Fit fullrun_ccd1_acisf03752_pi14-548_cl_pass0_src26 appears to have run properly
[Fri Oct 14 14:39:11 2011] fullrun_ccd1_acisf03752_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Fri Oct 14 14:39:11 2011] fullrun_ccd1_acisf03752_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Fri Oct 14 14:39:11 2011] Fit fullrun_ccd1_acisf03752_pi14-548_cl_pass0_tfrozen_src26 appears to have run properly
[Fri Oct 14 14:39:46 2011] Spatial fit model total counts = 29.720700, observed total counts = 30.000000
[Fri Oct 14 14:39:46 2011] Offset between fit and detection position for source 27 = 1.131145 pixels
[Fri Oct 14 14:39:46 2011] 29.015680 total counts/ 3.969180 bgd. counts: snr = 12.571776
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 1.131145 pixels
  Position = (907.1, 715.9) = 1 58 1.58 37 47 51.8
  Extent = 1.1 (0.3-1.6)", rotation angle = 0
  Source counts = 25.0 +/- 5.4
  Background counts = 4.0
  Rate = 0.0002 +/- 4e-05
[Fri Oct 14 14:39:46 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 14:39:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 14:39:46 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 14:39:46 2011] Source does appear to be extended
[Fri Oct 14 14:39:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 14:40:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 14:40:25 2011] Initial guess for spatial extent in simple fitting = 1.09"
[Fri Oct 14 14:40:25 2011] source mask rpix=2.2, npix_max = 29, mask sum = 28, frac = 0.954
[Fri Oct 14 14:40:25 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 1.09"
[Fri Oct 14 14:40:29 2011] fullrun_ccd1_acisf03752_pi14-548_cl_pass1_src26.ximg exists
[Fri Oct 14 14:40:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03752_pi14-548_cl_pass1_src26.csv
[Fri Oct 14 14:40:29 2011] fullrun_ccd1_acisf03752_pi14-548_cl_pass1_src26_1.ximg exists
[Fri Oct 14 14:40:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03752_pi14-548_cl_pass1_src26.csv
[Fri Oct 14 14:40:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf03752_pi14-548_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf03752_pi14-548_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 14:40:29 2011] fullrun_ccd1_acisf03752_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Fri Oct 14 14:40:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03752_pi14-548_cl_pass1_tfrozen_src26.csv
[Fri Oct 14 14:40:29 2011] fullrun_ccd1_acisf03752_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Fri Oct 14 14:40:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03752_pi14-548_cl_pass1_tfrozen_src26.csv
[Fri Oct 14 14:40:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf03752_pi14-548_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf03752_pi14-548_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 14:40:54 2011] Spatial fit model total counts = 28.971000, observed total counts = 32.000000
[Fri Oct 14 14:40:54 2011] Offset between fit and detection position for source 27 = 1.900665 pixels
[Fri Oct 14 14:40:54 2011] 27.920900 total counts/ 17.111300 bgd. counts: snr = 2.613173
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 1.900665 pixels
  Position = (905.5, 716.9) = 1 58 1.65 37 47 52.3
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 10.8 +/- 5.3
  Background counts = 17.1
  Rate = 8e-05 +/- 4e-05
[Fri Oct 14 14:40:54 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 14:40:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 14:40:54 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 14:40:54 2011] Source does appear to be extended
[Fri Oct 14 14:40:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 14:42:51 2011] Not overwriting source region fullrun_ccd1_acisf03752_pi14-548_pass1_cl_src27_src.reg
[Fri Oct 14 14:42:51 2011] Extracting stamp from image fullrun_ccd1_acisf03752_pi14-548_cl_sm2.00.img.gz, (884, 695) - (927, 738)
[Fri Oct 14 14:42:51 2011] Writing fullrun_ccd1_acisf03752_pi14-548_pass1_cl_src27.gif
[Fri Oct 14 14:44:13 2011] ../../acisf03752/products/events/fullrun_ccd1_acisf03752_pi14-548_pass1_cl_src27_src.evt and ../../acisf03752/products/events/fullrun_ccd1_acisf03752_pi14-548_pass1_cl_src27_bgd.evt exist, delete to re-create
[Fri Oct 14 14:44:13 2011] Size of ../../acisf03752/products/events/fullrun_ccd1_acisf03752_pi14-548_pass1_cl_src27_src.evt.gz[events] = 17 counts
[Fri Oct 14 14:44:13 2011] Mean chipx,y = (395.76, 672.29)
[Fri Oct 14 14:44:13 2011] Mean tdetx,y = (4459.71, 4502.76)
[Fri Oct 14 14:44:13 2011] chipx,y range = (384.00-418.00, 654.00-684.00)
[Fri Oct 14 14:44:13 2011] Size of ../../acisf03752/products/events/fullrun_ccd1_acisf03752_pi14-548_pass1_cl_src27_bgd.evt.gz[events] = 12 counts
[Fri Oct 14 14:44:13 2011] ../../acisf03752/products/images/fullrun_ccd1_acisf03752_pi14-548_pass1_cl_src27_src.img and ../../acisf03752/products/images/fullrun_ccd1_acisf03752_pi14-548_pass1_cl_src27_bgd.img exist, delete to re-create
[Fri Oct 14 14:44:13 2011] ../../acisf03752/products/spectra/fullrun_ccd1_acisf03752_pi14-548_pass1_cl_src27_src.pi and ../../acisf03752/products/spectra/fullrun_ccd1_acisf03752_pi14-548_pass1_cl_src27_bgd.pi exist, delete to re-create
[Fri Oct 14 14:44:13 2011] Not generating rmf since there are only 10 counts
[Fri Oct 14 14:44:16 2011] ../../acisf03752/products/lightcurves/fullrun_ccd1_acisf03752_pi14-548_pass1_cl_src27_src.lc and ../../acisf03752/products/lightcurves/fullrun_ccd1_acisf03752_pi14-548_pass1_cl_src27_bgd.lc exist, delete to re-create
[Fri Oct 14 14:45:04 2011] 191.101
[Fri Oct 14 14:49:46 2011] Updating aperture counts using extracted products
[Fri Oct 14 14:49:46 2011] Error reading totcts from fullrun_ccd1_acisf03752_pi14-548_pass1_cl_src27_src.pi.gz
[Fri Oct 14 14:49:46 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 14:49:46 2011] Using photon index=1.80, rate=8.16e-05, arf fullrun_ccd1_acisf03752_pi14-548_pass1_cl_src27.arf
[Fri Oct 14 14:49:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 14:49:46 2011] Updating source flux to 9.5e-16
[Fri Oct 14 14:50:21 2011] Source 27 has fewer than 100.000000 counts, skipping spectral fitting