[Sat Oct  1 10:05:40 2011] Detection parameters:
  Position = (404.6, 797.3) = 12 1 50.33 -18 57 35.9
  Extent = 1.0" x 0.5", rotation angle = 150 degrees
  Source counts = 14.3 +/- 3.9
  Background counts = 0.7
  Rate = 0.0004 +/- 0.0001

[Sat Oct  1 10:05:41 2011] Off-axis axis estimate = 4.57'
[Sat Oct  1 10:07:45 2011] Using EEF radius (= 1.02 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 10:07:45 2011] Initial guess for spatial extent in simple fitting = 1.02"
[Sat Oct  1 10:07:45 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.948
[Sat Oct  1 10:07:45 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 1.02"
[Sat Oct  1 10:07:50 2011] fullrun_ccd6_acisf03718_pi14-548_cl_pass0_src11.ximg exists
[Sat Oct  1 10:07:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03718_pi14-548_cl_pass0_src11.csv
[Sat Oct  1 10:07:50 2011] fullrun_ccd6_acisf03718_pi14-548_cl_pass0_src11_1.ximg exists
[Sat Oct  1 10:07:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03718_pi14-548_cl_pass0_src11.csv
[Sat Oct  1 10:07:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf03718_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf03718_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 10:07:51 2011] fullrun_ccd6_acisf03718_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Sat Oct  1 10:07:51 2011] fullrun_ccd6_acisf03718_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Oct  1 10:07:51 2011] Fit fullrun_ccd6_acisf03718_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Oct  1 10:08:22 2011] Spatial fit model total counts = 18.785800, observed total counts = 19.000000
[Sat Oct  1 10:08:22 2011] Offset between fit and detection position for source 10 = 0.614344 pixels
[Sat Oct  1 10:08:22 2011] 18.957040 total counts/ 7.051640 bgd. counts: snr = 4.483312
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.614344 pixels
  Position = (405.0, 797.8) = 12 1 50.33 -18 57 35.9
  Extent = 1.0 (0.3-1.8)", rotation angle = 0
  Source counts = 11.9 +/- 4.4
  Background counts = 7.1
  Rate = 0.0003 +/- 0.0001
[Sat Oct  1 10:08:22 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 10:08:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 10:08:22 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 10:08:22 2011] Source does appear to be extended
[Sat Oct  1 10:08:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 10:09:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  1 10:09:15 2011] Initial guess for spatial extent in simple fitting = 0.96"
[Sat Oct  1 10:09:15 2011] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.838
[Sat Oct  1 10:09:15 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.96"
[Sat Oct  1 10:09:17 2011] fullrun_ccd6_acisf03718_pi14-548_cl_pass1_src11.ximg exists
[Sat Oct  1 10:09:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03718_pi14-548_cl_pass1_src11.csv
[Sat Oct  1 10:09:17 2011] fullrun_ccd6_acisf03718_pi14-548_cl_pass1_src11_1.ximg exists
[Sat Oct  1 10:09:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03718_pi14-548_cl_pass1_src11.csv
[Sat Oct  1 10:09:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf03718_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf03718_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 10:09:19 2011] fullrun_ccd6_acisf03718_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Sat Oct  1 10:09:19 2011] fullrun_ccd6_acisf03718_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Oct  1 10:09:19 2011] Fit fullrun_ccd6_acisf03718_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Oct  1 10:09:55 2011] Spatial fit model total counts = 18.981100, observed total counts = 19.000000
[Sat Oct  1 10:09:55 2011] Offset between fit and detection position for source 10 = 0.250435 pixels
[Sat Oct  1 10:09:55 2011] 19.000180 total counts/ 6.339080 bgd. counts: snr = 5.028730
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.250435 pixels
  Position = (405.2, 797.8) = 12 1 50.33 -18 57 35.9
  Extent = 1.0 (0.3-1.8)", rotation angle = 0
  Source counts = 12.7 +/- 4.4
  Background counts = 6.3
  Rate = 0.0004 +/- 0.0001
[Sat Oct  1 10:09:55 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 10:09:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 10:09:55 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 10:09:55 2011] Source does appear to be extended
[Sat Oct  1 10:09:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 10:11:15 2011] Not overwriting source region fullrun_ccd6_acisf03718_pi14-548_pass1_cl_src10_src.reg
[Sat Oct  1 10:11:15 2011] Extracting stamp from image fullrun_ccd6_acisf03718_pi14-548_cl_sm2.00.img.gz, (360, 752) - (451, 843)
[Sat Oct  1 10:11:15 2011] Writing fullrun_ccd6_acisf03718_pi14-548_pass1_cl_src10.gif
[Sat Oct  1 10:12:01 2011] ../../acisf03718/products/events/fullrun_ccd6_acisf03718_pi14-548_pass1_cl_src10_src.evt and ../../acisf03718/products/events/fullrun_ccd6_acisf03718_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Sat Oct  1 10:12:01 2011] Size of ../../acisf03718/products/events/fullrun_ccd6_acisf03718_pi14-548_pass1_cl_src10_src.evt.gz[events] = 18 counts
[Sat Oct  1 10:12:01 2011] Mean chipx,y = (737.94, 308.44)
[Sat Oct  1 10:12:01 2011] Mean tdetx,y = (3612.94, 2010.44)
[Sat Oct  1 10:12:01 2011] chipx,y range = (719.00-752.00, 292.00-333.00)
[Sat Oct  1 10:12:01 2011] Size of ../../acisf03718/products/events/fullrun_ccd6_acisf03718_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 6 counts
[Sat Oct  1 10:12:01 2011] ../../acisf03718/products/images/fullrun_ccd6_acisf03718_pi14-548_pass1_cl_src10_src.img and ../../acisf03718/products/images/fullrun_ccd6_acisf03718_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Sat Oct  1 10:12:01 2011] ../../acisf03718/products/spectra/fullrun_ccd6_acisf03718_pi14-548_pass1_cl_src10_src.pi and ../../acisf03718/products/spectra/fullrun_ccd6_acisf03718_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Sat Oct  1 10:12:01 2011] Not generating rmf since there are only 12 counts
[Sat Oct  1 10:12:06 2011] ../../acisf03718/products/lightcurves/fullrun_ccd6_acisf03718_pi14-548_pass1_cl_src10_src.lc and ../../acisf03718/products/lightcurves/fullrun_ccd6_acisf03718_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sat Oct  1 10:12:46 2011] 204.388
[Sat Oct  1 10:16:40 2011] Updating aperture counts using extracted products
[Sat Oct  1 10:16:40 2011] Error reading totcts from fullrun_ccd6_acisf03718_pi14-548_pass1_cl_src10_src.pi.gz
[Sat Oct  1 10:16:40 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 10:16:40 2011] Using photon index=1.80, rate=0.000365, arf fullrun_ccd6_acisf03718_pi14-548_pass1_cl_src10.arf
[Sat Oct  1 10:16:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 10:16:40 2011] Updating source flux to 3.7e-15
[Sat Oct  1 10:16:48 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting