[Mon Sep 26 16:22:56 2011] Detection parameters:
  Position = (662.4, 958.7) = 17 45 18.70 -29 0 24.8
  Extent = 1.0" x 0.6", rotation angle = 99 degrees
  Source counts = 38.8 +/- 6.9
  Background counts = 9.2
  Rate = 0.0004 +/- 8e-05

[Mon Sep 26 16:23:19 2011] Off-axis axis estimate = 4.83'
[Mon Sep 26 16:27:10 2011] Using EEF radius (= 1.11 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:27:10 2011] Initial guess for spatial extent in simple fitting = 1.11"
[Mon Sep 26 16:27:10 2011] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.820
[Mon Sep 26 16:27:10 2011] Giving source the simple spatial ID 59 for pass 0, mean size = 1.11"
[Mon Sep 26 16:27:20 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src59.ximg exists
[Mon Sep 26 16:27:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src59.csv
[Mon Sep 26 16:27:20 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src59_1.ximg exists
[Mon Sep 26 16:27:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src59.csv
[Mon Sep 26 16:27:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:27:34 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src59.ximg exists
[Mon Sep 26 16:27:34 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src59_1.ximg exists
[Mon Sep 26 16:27:34 2011] Fit fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src59 appears to have run properly
[Mon Sep 26 16:28:44 2011] Spatial fit model total counts = 56.999700, observed total counts = 57.000000
[Mon Sep 26 16:28:44 2011] Offset between fit and detection position for source 90 = 0.766411 pixels
[Mon Sep 26 16:28:44 2011] 56.394600 total counts/ 24.221200 bgd. counts: snr = 6.537311
Spatial fit parameters:
  Offset between fit and detection position for source 90 = 0.766411 pixels
  Position = (662.8, 959.3) = 17 45 18.70 -29 0 24.7
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 32.2 +/- 7.5
  Background counts = 24.2
  Rate = 0.0004 +/- 8e-05
[Mon Sep 26 16:28:45 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:45 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:45 2011] Source does appear to be extended
[Mon Sep 26 16:28:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:54 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Mon Sep 26 16:29:54 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.021
[Mon Sep 26 16:29:54 2011] Giving source the simple spatial ID 55 for pass 1, mean size = 0.60"
[Mon Sep 26 16:29:57 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src55.ximg exists
[Mon Sep 26 16:29:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src55.csv
[Mon Sep 26 16:29:57 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src55_1.ximg exists
[Mon Sep 26 16:29:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src55.csv
[Mon Sep 26 16:29:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:30:00 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src55.ximg exists
[Mon Sep 26 16:30:00 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src55_1.ximg exists
[Mon Sep 26 16:30:00 2011] Fit fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src55 appears to have run properly
[Mon Sep 26 16:30:59 2011] Spatial fit model total counts = 55.943500, observed total counts = 56.000000
[Mon Sep 26 16:30:59 2011] Offset between fit and detection position for source 90 = 0.011511 pixels
[Mon Sep 26 16:30:59 2011] 55.282900 total counts/ 22.812300 bgd. counts: snr = 6.798385
Spatial fit parameters:
  Offset between fit and detection position for source 90 = 0.011511 pixels
  Position = (662.8, 959.3) = 17 45 18.70 -29 0 24.7
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 32.5 +/- 7.4
  Background counts = 22.8
  Rate = 0.0004 +/- 8e-05
[Mon Sep 26 16:30:59 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:59 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:59 2011] Source does appear to be extended
[Mon Sep 26 16:30:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:45:59 2011] Not overwriting source region fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src90_src.reg
[Mon Sep 26 16:45:59 2011] Extracting stamp from image fullrun_ccd3_acisf03665_pi14-548_cl_sm2.00.img.gz, (635, 931) - (691, 987)
[Mon Sep 26 16:45:59 2011] Writing fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src90.gif
[Mon Sep 26 16:49:06 2011] ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src90_src.evt and ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src90_bgd.evt exist, delete to re-create
[Mon Sep 26 16:49:06 2011] Size of ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src90_src.evt.gz[events] = 41 counts
[Mon Sep 26 16:49:06 2011] Mean chipx,y = (408.73, 830.17)
[Mon Sep 26 16:49:06 2011] Mean tdetx,y = (4301.83, 3469.73)
[Mon Sep 26 16:49:06 2011] chipx,y range = (385.00-425.00, 811.00-849.00)
[Mon Sep 26 16:49:06 2011] Size of ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src90_bgd.evt.gz[events] = 77 counts
[Mon Sep 26 16:49:06 2011] ../../acisf03665/products/images/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src90_src.img and ../../acisf03665/products/images/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src90_bgd.img exist, delete to re-create
[Mon Sep 26 16:49:06 2011] ../../acisf03665/products/spectra/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src90_src.pi and ../../acisf03665/products/spectra/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src90_bgd.pi exist, delete to re-create
[Mon Sep 26 16:49:06 2011] Not generating rmf since there are only 32 counts
[Mon Sep 26 16:49:09 2011] ../../acisf03665/products/lightcurves/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src90_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src90_bgd.lc exist, delete to re-create
[Mon Sep 26 16:51:17 2011] 185.497
[Mon Sep 26 16:51:54 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:54 2011] Error reading totcts from fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src90_src.pi.gz
[Mon Sep 26 16:51:55 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:55 2011] Using photon index=1.80, rate=0.000361, arf fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src90.arf
[Mon Sep 26 16:51:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:55 2011] Updating source flux to 5.9e-15
[Mon Sep 26 16:54:00 2011] Source 90 has fewer than 100.000000 counts, skipping spectral fitting