[Mon Sep 26 16:22:39 2011] Detection parameters:
  Position = (972.6, 528.1) = 17 45 7.04 -29 3 56.5
  Extent = 2.0" x 1.6", rotation angle = 57 degrees
  Source counts = 67.1 +/- 9.8
  Background counts = 29.9
  Rate = 0.0007 +/- 0.0001

[Mon Sep 26 16:23:19 2011] Off-axis axis estimate = 8.25'
[Mon Sep 26 16:27:10 2011] Using EEF radius (= 3.01 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:27:10 2011] Initial guess for spatial extent in simple fitting = 3.01"
[Mon Sep 26 16:27:10 2011] source mask rpix=6.1, npix_max = 174, mask sum = 182, frac = 1.041
[Mon Sep 26 16:27:10 2011] Giving source the simple spatial ID 33 for pass 0, mean size = 3.01"
[Mon Sep 26 16:27:18 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src33.ximg exists
[Mon Sep 26 16:27:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src33.csv
[Mon Sep 26 16:27:18 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src33_1.ximg exists
[Mon Sep 26 16:27:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src33.csv
[Mon Sep 26 16:27:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:27:33 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src33.ximg exists
[Mon Sep 26 16:27:33 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src33_1.ximg exists
[Mon Sep 26 16:27:33 2011] Fit fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src33 appears to have run properly
[Mon Sep 26 16:28:44 2011] Spatial fit model total counts = 187.999000, observed total counts = 188.000000
[Mon Sep 26 16:28:44 2011] Offset between fit and detection position for source 9 = 0.966662 pixels
[Mon Sep 26 16:28:44 2011] 187.009100 total counts/ 138.642000 bgd. counts: snr = 4.107737
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.966662 pixels
  Position = (971.7, 528.4) = 17 45 7.09 -29 3 56.6
  Extent = 1.2 (0.8-1.6)", rotation angle = 0
  Source counts = 48.4 +/- 13.7
  Background counts = 138.6
  Rate = 0.0005 +/- 0.0002
[Mon Sep 26 16:28:45 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:45 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:45 2011] Source does appear to be extended
[Mon Sep 26 16:28:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:54 2011] Initial guess for spatial extent in simple fitting = 1.16"
[Mon Sep 26 16:29:54 2011] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.916
[Mon Sep 26 16:29:54 2011] Giving source the simple spatial ID 32 for pass 1, mean size = 1.16"
[Mon Sep 26 16:29:56 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src32.ximg exists
[Mon Sep 26 16:29:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src32.csv
[Mon Sep 26 16:29:56 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src32_1.ximg exists
[Mon Sep 26 16:29:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src32.csv
[Mon Sep 26 16:29:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:29:59 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src32.ximg exists
[Mon Sep 26 16:29:59 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src32_1.ximg exists
[Mon Sep 26 16:29:59 2011] Fit fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src32 appears to have run properly
[Mon Sep 26 16:30:59 2011] Spatial fit model total counts = 72.868300, observed total counts = 73.000000
[Mon Sep 26 16:30:59 2011] Offset between fit and detection position for source 9 = 0.846466 pixels
[Mon Sep 26 16:30:59 2011] 74.122100 total counts/ 43.854500 bgd. counts: snr = 4.570576
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.846466 pixels
  Position = (971.6, 529.3) = 17 45 7.10 -29 3 56.2
  Extent = 0.7 (0.5-1.8)", rotation angle = 0
  Source counts = 30.3 +/- 8.6
  Background counts = 43.9
  Rate = 0.0003 +/- 0.0001
[Mon Sep 26 16:30:59 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:59 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:59 2011] Source does appear to be extended
[Mon Sep 26 16:30:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:45:58 2011] Not overwriting source region fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src9_src.reg
[Mon Sep 26 16:45:58 2011] Extracting stamp from image fullrun_ccd3_acisf03665_pi14-548_cl_sm2.00.img.gz, (940, 498) - (1003, 561)
[Mon Sep 26 16:45:58 2011] Writing fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src9.gif
[Mon Sep 26 16:47:49 2011] ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src9_src.evt and ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Mon Sep 26 16:47:49 2011] Size of ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src9_src.evt.gz[events] = 55 counts
[Mon Sep 26 16:47:49 2011] Mean chipx,y = (214.22, 335.27)
[Mon Sep 26 16:47:49 2011] Mean tdetx,y = (4796.73, 3275.22)
[Mon Sep 26 16:47:49 2011] chipx,y range = (194.00-233.00, 312.00-353.00)
[Mon Sep 26 16:47:49 2011] Size of ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 112 counts
[Mon Sep 26 16:47:49 2011] ../../acisf03665/products/images/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src9_src.img and ../../acisf03665/products/images/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Mon Sep 26 16:47:49 2011] ../../acisf03665/products/spectra/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src9_src.pi and ../../acisf03665/products/spectra/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Mon Sep 26 16:47:49 2011] Not generating rmf since there are only 30 counts
[Mon Sep 26 16:47:52 2011] ../../acisf03665/products/lightcurves/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src9_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Mon Sep 26 16:51:16 2011] 166.723
[Mon Sep 26 16:51:53 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:53 2011] Error reading totcts from fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src9_src.pi.gz
[Mon Sep 26 16:51:54 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:54 2011] Using photon index=1.80, rate=0.000337, arf fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src9.arf
[Mon Sep 26 16:51:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:54 2011] Updating source flux to 6e-15
[Mon Sep 26 16:54:00 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting