[Mon Sep 26 16:22:55 2011] Detection parameters:
  Position = (502.4, 930.7) = 17 45 24.70 -29 0 38.6
  Extent = 0.8" x 0.6", rotation angle = 55 degrees
  Source counts = 27.7 +/- 6.0
  Background counts = 8.3
  Rate = 0.0003 +/- 7e-05

[Mon Sep 26 16:23:19 2011] Off-axis axis estimate = 3.54'
[Mon Sep 26 16:27:10 2011] Using EEF radius (= 0.70 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:27:10 2011] Initial guess for spatial extent in simple fitting = 0.70"
[Mon Sep 26 16:27:10 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.078
[Mon Sep 26 16:27:10 2011] Giving source the simple spatial ID 76 for pass 0, mean size = 0.70"
[Mon Sep 26 16:27:20 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src76.ximg exists
[Mon Sep 26 16:27:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src76.csv
[Mon Sep 26 16:27:20 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src76_1.ximg exists
[Mon Sep 26 16:27:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src76.csv
[Mon Sep 26 16:27:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src76_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:27:34 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src76.ximg exists
[Mon Sep 26 16:27:34 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src76_1.ximg exists
[Mon Sep 26 16:27:34 2011] Fit fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src76 appears to have run properly
[Mon Sep 26 16:28:44 2011] Spatial fit model total counts = 55.998200, observed total counts = 56.000000
[Mon Sep 26 16:28:44 2011] Offset between fit and detection position for source 80 = 0.786471 pixels
[Mon Sep 26 16:28:44 2011] 56.576500 total counts/ 32.271600 bgd. counts: snr = 4.278422
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 0.786471 pixels
  Position = (502.9, 931.3) = 17 45 24.70 -29 0 38.5
  Extent = 0.6 (0.5-0.9)", rotation angle = 0
  Source counts = 24.3 +/- 7.5
  Background counts = 32.3
  Rate = 0.0003 +/- 8e-05
[Mon Sep 26 16:28:45 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:45 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:45 2011] Source does appear to be extended
[Mon Sep 26 16:28:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:54 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Mon Sep 26 16:29:54 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.977
[Mon Sep 26 16:29:54 2011] Giving source the simple spatial ID 66 for pass 1, mean size = 0.62"
[Mon Sep 26 16:29:57 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src66.ximg exists
[Mon Sep 26 16:29:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src66.csv
[Mon Sep 26 16:29:57 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src66_1.ximg exists
[Mon Sep 26 16:29:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src66.csv
[Mon Sep 26 16:29:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src66_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:30:00 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src66.ximg exists
[Mon Sep 26 16:30:00 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src66_1.ximg exists
[Mon Sep 26 16:30:00 2011] Fit fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src66 appears to have run properly
[Mon Sep 26 16:30:59 2011] Spatial fit model total counts = 56.767500, observed total counts = 57.000000
[Mon Sep 26 16:30:59 2011] Offset between fit and detection position for source 80 = 0.026300 pixels
[Mon Sep 26 16:30:59 2011] 55.745100 total counts/ 31.321700 bgd. counts: snr = 4.363987
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 0.026300 pixels
  Position = (502.9, 931.3) = 17 45 24.70 -29 0 38.6
  Extent = 0.6 (0.5-0.9)", rotation angle = 0
  Source counts = 24.4 +/- 7.5
  Background counts = 31.3
  Rate = 0.0003 +/- 8e-05
[Mon Sep 26 16:30:59 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:59 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:59 2011] Source does appear to be extended
[Mon Sep 26 16:30:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:45:59 2011] Not overwriting source region fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src80_src.reg
[Mon Sep 26 16:45:59 2011] Extracting stamp from image fullrun_ccd3_acisf03665_pi14-548_cl_sm2.00.img.gz, (474, 902) - (532, 961)
[Mon Sep 26 16:46:00 2011] Writing fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src80.gif
[Mon Sep 26 16:49:42 2011] ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src80_src.evt and ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src80_bgd.evt exist, delete to re-create
[Mon Sep 26 16:49:42 2011] Size of ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src80_src.evt.gz[events] = 36 counts
[Mon Sep 26 16:49:42 2011] Mean chipx,y = (567.08, 842.94)
[Mon Sep 26 16:49:42 2011] Mean tdetx,y = (4289.06, 3628.08)
[Mon Sep 26 16:49:42 2011] chipx,y range = (549.00-585.00, 824.00-863.00)
[Mon Sep 26 16:49:43 2011] Size of ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src80_bgd.evt.gz[events] = 109 counts
[Mon Sep 26 16:49:43 2011] ../../acisf03665/products/images/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src80_src.img and ../../acisf03665/products/images/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src80_bgd.img exist, delete to re-create
[Mon Sep 26 16:49:43 2011] ../../acisf03665/products/spectra/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src80_src.pi and ../../acisf03665/products/spectra/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src80_bgd.pi exist, delete to re-create
[Mon Sep 26 16:49:43 2011] Not generating rmf since there are only 24 counts
[Mon Sep 26 16:49:47 2011] ../../acisf03665/products/lightcurves/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src80_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src80_bgd.lc exist, delete to re-create
[Mon Sep 26 16:51:17 2011] 190.969
[Mon Sep 26 16:51:54 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:54 2011] Error reading totcts from fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src80_src.pi.gz
[Mon Sep 26 16:51:55 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:55 2011] Using photon index=1.80, rate=0.000272, arf fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src80.arf
[Mon Sep 26 16:51:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:55 2011] Updating source flux to 4.4e-15
[Mon Sep 26 16:54:00 2011] Source 80 has fewer than 100.000000 counts, skipping spectral fitting