[Mon Sep 26 16:22:55 2011] Detection parameters:
  Position = (176.8, 929.5) = 17 45 36.91 -29 0 39.2
  Extent = 0.8" x 0.6", rotation angle = 34 degrees
  Source counts = 84.9 +/- 11.1
  Background counts = 39.1
  Rate = 0.0009 +/- 0.0001

[Mon Sep 26 16:23:19 2011] Off-axis axis estimate = 0.94'
[Mon Sep 26 16:27:10 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:27:10 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Sep 26 16:27:10 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.926
[Mon Sep 26 16:27:10 2011] Giving source the simple spatial ID 22 for pass 0, mean size = 0.38"
[Mon Sep 26 16:27:17 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src22.ximg exists
[Mon Sep 26 16:27:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src22.csv
[Mon Sep 26 16:27:17 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src22_1.ximg exists
[Mon Sep 26 16:27:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src22.csv
[Mon Sep 26 16:27:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:27:33 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src22.ximg exists
[Mon Sep 26 16:27:33 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src22_1.ximg exists
[Mon Sep 26 16:27:33 2011] Fit fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src22 appears to have run properly
[Mon Sep 26 16:28:44 2011] Spatial fit model total counts = 210.000000, observed total counts = 210.000000
[Mon Sep 26 16:28:44 2011] Offset between fit and detection position for source 79 = 0.823871 pixels
[Mon Sep 26 16:28:44 2011] 209.350100 total counts/ 135.690000 bgd. counts: snr = 6.323513
Spatial fit parameters:
  Offset between fit and detection position for source 79 = 0.823871 pixels
  Position = (177.5, 930.0) = 17 45 36.90 -29 0 39.2
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 73.7 +/- 14.5
  Background counts = 135.7
  Rate = 0.0008 +/- 0.0002
[Mon Sep 26 16:28:45 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:45 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:45 2011] Source does appear to be extended
[Mon Sep 26 16:28:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:54 2011] Initial guess for spatial extent in simple fitting = 0.54"
[Mon Sep 26 16:29:54 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.178
[Mon Sep 26 16:29:54 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 0.54"
[Mon Sep 26 16:29:56 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src21.ximg exists
[Mon Sep 26 16:29:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src21.csv
[Mon Sep 26 16:29:56 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src21_1.ximg exists
[Mon Sep 26 16:29:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src21.csv
[Mon Sep 26 16:29:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:29:59 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src21.ximg exists
[Mon Sep 26 16:29:59 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src21_1.ximg exists
[Mon Sep 26 16:29:59 2011] Fit fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src21 appears to have run properly
[Mon Sep 26 16:30:59 2011] Spatial fit model total counts = 214.000000, observed total counts = 214.000000
[Mon Sep 26 16:30:59 2011] Offset between fit and detection position for source 79 = 0.004487 pixels
[Mon Sep 26 16:30:59 2011] 212.924000 total counts/ 140.207000 bgd. counts: snr = 6.141170
Spatial fit parameters:
  Offset between fit and detection position for source 79 = 0.004487 pixels
  Position = (177.5, 930.0) = 17 45 36.90 -29 0 39.2
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 72.7 +/- 14.6
  Background counts = 140.2
  Rate = 0.0008 +/- 0.0002
[Mon Sep 26 16:30:59 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:59 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:59 2011] Source does appear to be extended
[Mon Sep 26 16:30:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:45:58 2011] Not overwriting source region fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src79_src.reg
[Mon Sep 26 16:45:58 2011] Extracting stamp from image fullrun_ccd3_acisf03665_pi14-548_cl_sm2.00.img.gz, (153, 906) - (202, 954)
[Mon Sep 26 16:45:58 2011] Writing fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src79.gif
[Mon Sep 26 16:47:17 2011] ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src79_src.evt and ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src79_bgd.evt exist, delete to re-create
[Mon Sep 26 16:47:17 2011] Size of ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src79_src.evt.gz[events] = 112 counts
[Mon Sep 26 16:47:17 2011] Mean chipx,y = (886.23, 927.60)
[Mon Sep 26 16:47:17 2011] Mean tdetx,y = (4204.40, 3947.23)
[Mon Sep 26 16:47:17 2011] chipx,y range = (864.00-905.00, 904.00-943.00)
[Mon Sep 26 16:47:17 2011] Size of ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src79_bgd.evt.gz[events] = 346 counts
[Mon Sep 26 16:47:17 2011] ../../acisf03665/products/images/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src79_src.img and ../../acisf03665/products/images/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src79_bgd.img exist, delete to re-create
[Mon Sep 26 16:47:17 2011] ../../acisf03665/products/spectra/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src79_src.pi and ../../acisf03665/products/spectra/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src79_bgd.pi exist, delete to re-create
[Mon Sep 26 16:47:17 2011] Not generating rmf since there are only 72 counts
[Mon Sep 26 16:47:20 2011] ../../acisf03665/products/lightcurves/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src79_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src79_bgd.lc exist, delete to re-create
[Mon Sep 26 16:51:15 2011] 203.438
[Mon Sep 26 16:51:53 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:53 2011] Error reading totcts from fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src79_src.pi.gz
[Mon Sep 26 16:51:54 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:54 2011] Using photon index=1.80, rate=0.000809, arf fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src79.arf
[Mon Sep 26 16:51:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:54 2011] Updating source flux to 1.2e-14
[Mon Sep 26 16:54:00 2011] Source 79 has fewer than 100.000000 counts, skipping spectral fitting