[Mon Sep 26 16:22:54 2011] Detection parameters:
  Position = (188.6, 900.1) = 17 45 36.46 -29 0 53.7
  Extent = 0.5" x 0.5", rotation angle = 155 degrees
  Source counts = 41.3 +/- 7.7
  Background counts = 18.7
  Rate = 0.0005 +/- 9e-05

[Mon Sep 26 16:23:19 2011] Off-axis axis estimate = 1.15'
[Mon Sep 26 16:27:10 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:27:10 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Sep 26 16:27:10 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.923
[Mon Sep 26 16:27:10 2011] Giving source the simple spatial ID 51 for pass 0, mean size = 0.38"
[Mon Sep 26 16:27:19 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src51.ximg exists
[Mon Sep 26 16:27:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src51.csv
[Mon Sep 26 16:27:19 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src51_1.ximg exists
[Mon Sep 26 16:27:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src51.csv
[Mon Sep 26 16:27:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:27:34 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src51.ximg exists
[Mon Sep 26 16:27:34 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src51_1.ximg exists
[Mon Sep 26 16:27:34 2011] Fit fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src51 appears to have run properly
[Mon Sep 26 16:28:44 2011] Spatial fit model total counts = 103.996000, observed total counts = 104.000000
[Mon Sep 26 16:28:44 2011] Offset between fit and detection position for source 72 = 0.594639 pixels
[Mon Sep 26 16:28:44 2011] 103.818600 total counts/ 61.176500 bgd. counts: snr = 5.451880
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 0.594639 pixels
  Position = (189.1, 900.5) = 17 45 36.46 -29 0 53.8
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 42.6 +/- 10.2
  Background counts = 61.2
  Rate = 0.0005 +/- 0.0001
[Mon Sep 26 16:28:45 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:45 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:45 2011] Source does appear to be extended
[Mon Sep 26 16:28:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:54 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Mon Sep 26 16:29:54 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.862
[Mon Sep 26 16:29:54 2011] Giving source the simple spatial ID 50 for pass 1, mean size = 0.40"
[Mon Sep 26 16:29:57 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src50.ximg exists
[Mon Sep 26 16:29:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src50.csv
[Mon Sep 26 16:29:57 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src50_1.ximg exists
[Mon Sep 26 16:29:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src50.csv
[Mon Sep 26 16:29:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:30:00 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src50.ximg exists
[Mon Sep 26 16:30:00 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src50_1.ximg exists
[Mon Sep 26 16:30:00 2011] Fit fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src50 appears to have run properly
[Mon Sep 26 16:30:59 2011] Spatial fit model total counts = 98.990800, observed total counts = 99.000000
[Mon Sep 26 16:30:59 2011] Offset between fit and detection position for source 72 = 0.003572 pixels
[Mon Sep 26 16:30:59 2011] 99.148500 total counts/ 56.136500 bgd. counts: snr = 5.740728
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 0.003572 pixels
  Position = (189.1, 900.5) = 17 45 36.46 -29 0 53.8
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 43.0 +/- 10.0
  Background counts = 56.1
  Rate = 0.0005 +/- 0.0001
[Mon Sep 26 16:30:59 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:59 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:59 2011] Source does appear to be extended
[Mon Sep 26 16:30:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:45:59 2011] Not overwriting source region fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src72_src.reg
[Mon Sep 26 16:45:59 2011] Extracting stamp from image fullrun_ccd3_acisf03665_pi14-548_cl_sm2.00.img.gz, (171, 882) - (208, 919)
[Mon Sep 26 16:45:59 2011] Writing fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src72.gif
[Mon Sep 26 16:48:44 2011] ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src72_src.evt and ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src72_bgd.evt exist, delete to re-create
[Mon Sep 26 16:48:44 2011] Size of ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src72_src.evt.gz[events] = 50 counts
[Mon Sep 26 16:48:44 2011] Mean chipx,y = (882.30, 890.84)
[Mon Sep 26 16:48:44 2011] Mean tdetx,y = (4241.16, 3943.30)
[Mon Sep 26 16:48:44 2011] chipx,y range = (864.00-897.00, 873.00-909.00)
[Mon Sep 26 16:48:44 2011] Size of ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src72_bgd.evt.gz[events] = 114 counts
[Mon Sep 26 16:48:44 2011] ../../acisf03665/products/images/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src72_src.img and ../../acisf03665/products/images/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src72_bgd.img exist, delete to re-create
[Mon Sep 26 16:48:44 2011] ../../acisf03665/products/spectra/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src72_src.pi and ../../acisf03665/products/spectra/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src72_bgd.pi exist, delete to re-create
[Mon Sep 26 16:48:44 2011] Not generating rmf since there are only 43 counts
[Mon Sep 26 16:48:53 2011] ../../acisf03665/products/lightcurves/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src72_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src72_bgd.lc exist, delete to re-create
[Mon Sep 26 16:51:16 2011] 204.809
[Mon Sep 26 16:51:54 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:54 2011] Error reading totcts from fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src72_src.pi.gz
[Mon Sep 26 16:51:55 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:55 2011] Using photon index=1.80, rate=0.000478, arf fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src72.arf
[Mon Sep 26 16:51:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:55 2011] Updating source flux to 7.2e-15
[Mon Sep 26 16:54:00 2011] Source 72 has fewer than 100.000000 counts, skipping spectral fitting