[Mon Sep 26 16:22:46 2011] Detection parameters:
  Position = (289.7, 848.9) = 17 45 32.67 -29 1 18.9
  Extent = 0.5" x 0.5", rotation angle = 34 degrees
  Source counts = 88.2 +/- 10.2
  Background counts = 16.8
  Rate = 0.001 +/- 0.0001

[Mon Sep 26 16:23:19 2011] Off-axis axis estimate = 2.07'
[Mon Sep 26 16:27:10 2011] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:27:10 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Mon Sep 26 16:27:10 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.778
[Mon Sep 26 16:27:10 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 0.44"
[Mon Sep 26 16:27:16 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src19.ximg exists
[Mon Sep 26 16:27:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src19.csv
[Mon Sep 26 16:27:16 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src19_1.ximg exists
[Mon Sep 26 16:27:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src19.csv
[Mon Sep 26 16:27:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:27:33 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Mon Sep 26 16:27:33 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Mon Sep 26 16:27:33 2011] Fit fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Mon Sep 26 16:28:44 2011] Spatial fit model total counts = 121.000000, observed total counts = 121.000000
[Mon Sep 26 16:28:44 2011] Offset between fit and detection position for source 60 = 0.803940 pixels
[Mon Sep 26 16:28:44 2011] 121.825000 total counts/ 40.187900 bgd. counts: snr = 12.877748
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 0.803940 pixels
  Position = (290.3, 849.5) = 17 45 32.67 -29 1 18.9
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 81.6 +/- 11.0
  Background counts = 40.2
  Rate = 0.0009 +/- 0.0001
[Mon Sep 26 16:28:45 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:45 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:45 2011] Source does appear to be extended
[Mon Sep 26 16:28:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:54 2011] Initial guess for spatial extent in simple fitting = 0.54"
[Mon Sep 26 16:29:54 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.877
[Mon Sep 26 16:29:54 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 0.54"
[Mon Sep 26 16:29:56 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src18.ximg exists
[Mon Sep 26 16:29:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src18.csv
[Mon Sep 26 16:29:56 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src18_1.ximg exists
[Mon Sep 26 16:29:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src18.csv
[Mon Sep 26 16:29:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:29:59 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Mon Sep 26 16:29:59 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Mon Sep 26 16:29:59 2011] Fit fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Mon Sep 26 16:30:59 2011] Spatial fit model total counts = 120.644000, observed total counts = 121.000000
[Mon Sep 26 16:30:59 2011] Offset between fit and detection position for source 60 = 0.006411 pixels
[Mon Sep 26 16:30:59 2011] 121.526000 total counts/ 40.641700 bgd. counts: snr = 12.687566
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 0.006411 pixels
  Position = (290.3, 849.5) = 17 45 32.67 -29 1 18.8
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 80.9 +/- 11.0
  Background counts = 40.6
  Rate = 0.0009 +/- 0.0001
[Mon Sep 26 16:30:59 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:59 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:59 2011] Source does appear to be extended
[Mon Sep 26 16:30:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:45:58 2011] Not overwriting source region fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src60_src.reg
[Mon Sep 26 16:45:58 2011] Extracting stamp from image fullrun_ccd3_acisf03665_pi14-548_cl_sm2.00.img.gz, (266, 825) - (315, 874)
[Mon Sep 26 16:45:58 2011] Writing fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src60.gif
[Mon Sep 26 16:47:06 2011] ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src60_src.evt and ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src60_bgd.evt exist, delete to re-create
[Mon Sep 26 16:47:06 2011] Size of ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src60_src.evt.gz[events] = 91 counts
[Mon Sep 26 16:47:06 2011] Mean chipx,y = (795.16, 816.36)
[Mon Sep 26 16:47:06 2011] Mean tdetx,y = (4315.64, 3856.16)
[Mon Sep 26 16:47:06 2011] chipx,y range = (776.00-814.00, 799.00-837.00)
[Mon Sep 26 16:47:06 2011] Size of ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src60_bgd.evt.gz[events] = 34 counts
[Mon Sep 26 16:47:06 2011] ../../acisf03665/products/images/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src60_src.img and ../../acisf03665/products/images/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src60_bgd.img exist, delete to re-create
[Mon Sep 26 16:47:06 2011] ../../acisf03665/products/spectra/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src60_src.pi and ../../acisf03665/products/spectra/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src60_bgd.pi exist, delete to re-create
[Mon Sep 26 16:47:06 2011] Not generating rmf since there are only 80 counts
[Mon Sep 26 16:47:10 2011] ../../acisf03665/products/lightcurves/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src60_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src60_bgd.lc exist, delete to re-create
[Mon Sep 26 16:51:15 2011] 200.887
[Mon Sep 26 16:51:53 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:53 2011] Error reading totcts from fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src60_src.pi.gz
[Mon Sep 26 16:51:54 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:54 2011] Using photon index=1.80, rate=0.000899, arf fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src60.arf
[Mon Sep 26 16:51:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:54 2011] Updating source flux to 1.4e-14
[Mon Sep 26 16:54:00 2011] Source 60 has fewer than 100.000000 counts, skipping spectral fitting