[Mon Sep 26 16:22:46 2011] Detection parameters:
  Position = (228.1, 849.1) = 17 45 34.98 -29 1 18.8
  Extent = 0.7" x 0.5", rotation angle = 173 degrees
  Source counts = 78.5 +/- 9.8
  Background counts = 17.5
  Rate = 0.0009 +/- 0.0001

[Mon Sep 26 16:23:19 2011] Off-axis axis estimate = 1.66'
[Mon Sep 26 16:27:10 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:27:10 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Mon Sep 26 16:27:10 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.577
[Mon Sep 26 16:27:10 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 0.40"
[Mon Sep 26 16:27:17 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src26.ximg exists
[Mon Sep 26 16:27:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src26.csv
[Mon Sep 26 16:27:18 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src26_1.ximg exists
[Mon Sep 26 16:27:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src26.csv
[Mon Sep 26 16:27:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:27:33 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Mon Sep 26 16:27:33 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Mon Sep 26 16:27:33 2011] Fit fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src26 appears to have run properly
[Mon Sep 26 16:28:44 2011] Spatial fit model total counts = 128.995000, observed total counts = 129.000000
[Mon Sep 26 16:28:44 2011] Offset between fit and detection position for source 59 = 1.096621 pixels
[Mon Sep 26 16:28:44 2011] 128.158700 total counts/ 56.992900 bgd. counts: snr = 9.426728
Spatial fit parameters:
  Offset between fit and detection position for source 59 = 1.096621 pixels
  Position = (228.7, 849.9) = 17 45 34.98 -29 1 18.7
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 71.2 +/- 11.3
  Background counts = 57.0
  Rate = 0.0008 +/- 0.0001
[Mon Sep 26 16:28:45 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:45 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:45 2011] Source does appear to be extended
[Mon Sep 26 16:28:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:54 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Mon Sep 26 16:29:54 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.815
[Mon Sep 26 16:29:54 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 0.42"
[Mon Sep 26 16:29:56 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src25.ximg exists
[Mon Sep 26 16:29:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src25.csv
[Mon Sep 26 16:29:56 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src25_1.ximg exists
[Mon Sep 26 16:29:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src25.csv
[Mon Sep 26 16:29:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:29:59 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Mon Sep 26 16:29:59 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Mon Sep 26 16:29:59 2011] Fit fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src25 appears to have run properly
[Mon Sep 26 16:30:59 2011] Spatial fit model total counts = 129.997000, observed total counts = 130.000000
[Mon Sep 26 16:30:59 2011] Offset between fit and detection position for source 59 = 0.002897 pixels
[Mon Sep 26 16:30:59 2011] 128.700300 total counts/ 57.826900 bgd. counts: snr = 9.320051
Spatial fit parameters:
  Offset between fit and detection position for source 59 = 0.002897 pixels
  Position = (228.7, 849.9) = 17 45 34.98 -29 1 18.7
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 70.9 +/- 11.3
  Background counts = 57.8
  Rate = 0.0008 +/- 0.0001
[Mon Sep 26 16:30:59 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:59 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:59 2011] Source does appear to be extended
[Mon Sep 26 16:30:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:45:58 2011] Not overwriting source region fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src59_src.reg
[Mon Sep 26 16:45:58 2011] Extracting stamp from image fullrun_ccd3_acisf03665_pi14-548_cl_sm2.00.img.gz, (210, 831) - (248, 869)
[Mon Sep 26 16:45:58 2011] Writing fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src59.gif
[Mon Sep 26 16:47:29 2011] ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src59_src.evt and ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src59_bgd.evt exist, delete to re-create
[Mon Sep 26 16:47:29 2011] Size of ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src59_src.evt.gz[events] = 81 counts
[Mon Sep 26 16:47:29 2011] Mean chipx,y = (856.32, 834.32)
[Mon Sep 26 16:47:29 2011] Mean tdetx,y = (4297.68, 3917.32)
[Mon Sep 26 16:47:29 2011] chipx,y range = (836.00-873.00, 815.00-850.00)
[Mon Sep 26 16:47:29 2011] Size of ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src59_bgd.evt.gz[events] = 88 counts
[Mon Sep 26 16:47:29 2011] ../../acisf03665/products/images/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src59_src.img and ../../acisf03665/products/images/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src59_bgd.img exist, delete to re-create
[Mon Sep 26 16:47:29 2011] ../../acisf03665/products/spectra/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src59_src.pi and ../../acisf03665/products/spectra/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src59_bgd.pi exist, delete to re-create
[Mon Sep 26 16:47:29 2011] Not generating rmf since there are only 70 counts
[Mon Sep 26 16:47:32 2011] ../../acisf03665/products/lightcurves/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src59_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src59_bgd.lc exist, delete to re-create
[Mon Sep 26 16:51:15 2011] 204.412
[Mon Sep 26 16:51:53 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:53 2011] Error reading totcts from fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src59_src.pi.gz
[Mon Sep 26 16:51:54 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:54 2011] Using photon index=1.80, rate=0.000788, arf fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src59.arf
[Mon Sep 26 16:51:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:54 2011] Updating source flux to 1.2e-14
[Mon Sep 26 16:54:00 2011] Source 59 has fewer than 100.000000 counts, skipping spectral fitting