[Mon Sep 26 16:22:44 2011] Detection parameters:
  Position = (610.9, 781.2) = 17 45 20.62 -29 1 52.1
  Extent = 1.0" x 0.7", rotation angle = 66 degrees
  Source counts = 40.4 +/- 7.1
  Background counts = 9.6
  Rate = 0.0004 +/- 8e-05

[Mon Sep 26 16:23:19 2011] Off-axis axis estimate = 4.69'
[Mon Sep 26 16:27:10 2011] Using EEF radius (= 1.06 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:27:10 2011] Initial guess for spatial extent in simple fitting = 1.06"
[Mon Sep 26 16:27:10 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.060
[Mon Sep 26 16:27:10 2011] Giving source the simple spatial ID 53 for pass 0, mean size = 1.06"
[Mon Sep 26 16:27:19 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src53.ximg exists
[Mon Sep 26 16:27:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src53.csv
[Mon Sep 26 16:27:19 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src53_1.ximg exists
[Mon Sep 26 16:27:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src53.csv
[Mon Sep 26 16:27:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:27:34 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src53.ximg exists
[Mon Sep 26 16:27:34 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src53_1.ximg exists
[Mon Sep 26 16:27:34 2011] Fit fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src53 appears to have run properly
[Mon Sep 26 16:28:44 2011] Spatial fit model total counts = 56.490400, observed total counts = 56.000000
[Mon Sep 26 16:28:44 2011] Offset between fit and detection position for source 42 = 0.731537 pixels
[Mon Sep 26 16:28:44 2011] 57.465300 total counts/ 17.982900 bgd. counts: snr = 9.310514
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 0.731537 pixels
  Position = (611.3, 781.8) = 17 45 20.63 -29 1 52.1
  Extent = 1.0 (0.7-1.4)", rotation angle = 0
  Source counts = 39.5 +/- 7.6
  Background counts = 18.0
  Rate = 0.0004 +/- 8e-05
[Mon Sep 26 16:28:45 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:45 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:45 2011] Source does appear to be extended
[Mon Sep 26 16:28:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:54 2011] Initial guess for spatial extent in simple fitting = 0.96"
[Mon Sep 26 16:29:54 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.038
[Mon Sep 26 16:29:54 2011] Giving source the simple spatial ID 52 for pass 1, mean size = 0.96"
[Mon Sep 26 16:29:57 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src52.ximg exists
[Mon Sep 26 16:29:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src52.csv
[Mon Sep 26 16:29:57 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src52_1.ximg exists
[Mon Sep 26 16:29:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src52.csv
[Mon Sep 26 16:29:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:30:00 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src52.ximg exists
[Mon Sep 26 16:30:00 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src52_1.ximg exists
[Mon Sep 26 16:30:00 2011] Fit fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src52 appears to have run properly
[Mon Sep 26 16:30:59 2011] Spatial fit model total counts = 56.501000, observed total counts = 56.000000
[Mon Sep 26 16:30:59 2011] Offset between fit and detection position for source 42 = 0.051025 pixels
[Mon Sep 26 16:30:59 2011] 57.434000 total counts/ 18.860100 bgd. counts: snr = 8.882221
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 0.051025 pixels
  Position = (611.3, 781.9) = 17 45 20.63 -29 1 52.1
  Extent = 0.9 (0.7-1.3)", rotation angle = 0
  Source counts = 38.6 +/- 7.6
  Background counts = 18.9
  Rate = 0.0004 +/- 8e-05
[Mon Sep 26 16:30:59 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:59 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:59 2011] Source does appear to be extended
[Mon Sep 26 16:30:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:45:59 2011] Not overwriting source region fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src42_src.reg
[Mon Sep 26 16:45:59 2011] Extracting stamp from image fullrun_ccd3_acisf03665_pi14-548_cl_sm2.00.img.gz, (569, 739) - (654, 824)
[Mon Sep 26 16:45:59 2011] Writing fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src42.gif
[Mon Sep 26 16:48:57 2011] ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src42_src.evt and ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src42_bgd.evt exist, delete to re-create
[Mon Sep 26 16:48:57 2011] Size of ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src42_src.evt.gz[events] = 51 counts
[Mon Sep 26 16:48:57 2011] Mean chipx,y = (498.22, 669.90)
[Mon Sep 26 16:48:57 2011] Mean tdetx,y = (4462.10, 3559.22)
[Mon Sep 26 16:48:57 2011] chipx,y range = (482.00-518.00, 649.00-688.00)
[Mon Sep 26 16:48:57 2011] Size of ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src42_bgd.evt.gz[events] = 160 counts
[Mon Sep 26 16:48:57 2011] ../../acisf03665/products/images/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src42_src.img and ../../acisf03665/products/images/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src42_bgd.img exist, delete to re-create
[Mon Sep 26 16:48:57 2011] ../../acisf03665/products/spectra/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src42_src.pi and ../../acisf03665/products/spectra/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src42_bgd.pi exist, delete to re-create
[Mon Sep 26 16:48:57 2011] Not generating rmf since there are only 38 counts
[Mon Sep 26 16:49:00 2011] ../../acisf03665/products/lightcurves/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src42_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src42_bgd.lc exist, delete to re-create
[Mon Sep 26 16:51:17 2011] 185.477
[Mon Sep 26 16:51:54 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:54 2011] Error reading totcts from fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src42_src.pi.gz
[Mon Sep 26 16:51:55 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:55 2011] Using photon index=1.80, rate=0.000429, arf fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src42.arf
[Mon Sep 26 16:51:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:55 2011] Updating source flux to 7e-15
[Mon Sep 26 16:54:00 2011] Source 42 has fewer than 100.000000 counts, skipping spectral fitting