[Mon Sep 26 16:22:42 2011] Detection parameters:
  Position = (238.7, 763.3) = 17 45 34.58 -29 2 1.0
  Extent = 0.9" x 0.5", rotation angle = 163 degrees
  Source counts = 158.3 +/- 13.4
  Background counts = 20.7
  Rate = 0.002 +/- 0.0001

[Mon Sep 26 16:23:19 2011] Off-axis axis estimate = 2.23'
[Mon Sep 26 16:27:10 2011] Using EEF radius (= 0.46 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:27:10 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Mon Sep 26 16:27:10 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.105
[Mon Sep 26 16:27:10 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 0.46"
[Mon Sep 26 16:27:12 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src12.ximg exists
[Mon Sep 26 16:27:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src12.csv
[Mon Sep 26 16:27:12 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src12_1.ximg exists
[Mon Sep 26 16:27:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src12.csv
[Mon Sep 26 16:27:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:27:33 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Mon Sep 26 16:27:33 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Mon Sep 26 16:27:33 2011] Fit fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Mon Sep 26 16:28:44 2011] Spatial fit model total counts = 191.989000, observed total counts = 191.000000
[Mon Sep 26 16:28:44 2011] Offset between fit and detection position for source 38 = 0.916548 pixels
[Mon Sep 26 16:28:44 2011] 193.128900 total counts/ 49.933900 bgd. counts: snr = 20.264230
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.916548 pixels
  Position = (239.5, 763.8) = 17 45 34.57 -29 2 1.0
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 143.2 +/- 13.9
  Background counts = 49.9
  Rate = 0.002 +/- 0.0002
[Mon Sep 26 16:28:45 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:45 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:45 2011] Source does appear to be extended
[Mon Sep 26 16:28:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:54 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Mon Sep 26 16:29:54 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.980
[Mon Sep 26 16:29:54 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.50"
[Mon Sep 26 16:29:56 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src11.ximg exists
[Mon Sep 26 16:29:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src11.csv
[Mon Sep 26 16:29:56 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src11_1.ximg exists
[Mon Sep 26 16:29:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src11.csv
[Mon Sep 26 16:29:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:29:59 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Mon Sep 26 16:29:59 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Sep 26 16:29:59 2011] Fit fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Mon Sep 26 16:30:59 2011] Spatial fit model total counts = 191.999000, observed total counts = 192.000000
[Mon Sep 26 16:30:59 2011] Offset between fit and detection position for source 38 = 0.007026 pixels
[Mon Sep 26 16:30:59 2011] 192.055200 total counts/ 49.852200 bgd. counts: snr = 20.140331
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.007026 pixels
  Position = (239.5, 763.8) = 17 45 34.57 -29 2 1.0
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 142.2 +/- 13.9
  Background counts = 49.9
  Rate = 0.002 +/- 0.0002
[Mon Sep 26 16:30:59 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:59 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:59 2011] Source does appear to be extended
[Mon Sep 26 16:30:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:45:58 2011] Not overwriting source region fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src38_src.reg
[Mon Sep 26 16:45:58 2011] Extracting stamp from image fullrun_ccd3_acisf03665_pi14-548_cl_sm2.00.img.gz, (217, 741) - (262, 786)
[Mon Sep 26 16:45:58 2011] Writing fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src38.gif
[Mon Sep 26 16:46:42 2011] ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src38_src.evt and ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src38_bgd.evt exist, delete to re-create
[Mon Sep 26 16:46:42 2011] Size of ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src38_src.evt.gz[events] = 155 counts
[Mon Sep 26 16:46:42 2011] Mean chipx,y = (865.15, 747.19)
[Mon Sep 26 16:46:42 2011] Mean tdetx,y = (4384.81, 3926.15)
[Mon Sep 26 16:46:42 2011] chipx,y range = (845.00-885.00, 729.00-768.00)
[Mon Sep 26 16:46:42 2011] Size of ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src38_bgd.evt.gz[events] = 87 counts
[Mon Sep 26 16:46:42 2011] ../../acisf03665/products/images/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src38_src.img and ../../acisf03665/products/images/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src38_bgd.img exist, delete to re-create
[Mon Sep 26 16:46:42 2011] ../../acisf03665/products/spectra/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src38_src.pi and ../../acisf03665/products/spectra/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src38_bgd.pi exist, delete to re-create
[Mon Sep 26 16:46:46 2011] ../../acisf03665/products/lightcurves/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src38_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src38_bgd.lc exist, delete to re-create
[Mon Sep 26 16:51:15 2011] Keeping rmf generated by specextract
[Mon Sep 26 16:51:15 2011] 200.149
[Mon Sep 26 16:51:53 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:53 2011] Error reading totcts from fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src38_src.pi.gz
[Mon Sep 26 16:51:54 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:54 2011] Using photon index=1.80, rate=0.00158, arf fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src38.arf
[Mon Sep 26 16:51:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:54 2011] Updating source flux to 2.4e-14