[Mon Sep 26 16:23:11 2011] Detection parameters:
  Position = (391.0, 1038.2) = 17 45 28.88 -28 59 45.7
  Extent = 0.6" x 0.5", rotation angle = 106 degrees
  Source counts = 21.4 +/- 5.8
  Background counts = 12.6
  Rate = 0.0002 +/- 6e-05

[Mon Sep 26 16:23:19 2011] Off-axis axis estimate = 2.64'
[Mon Sep 26 16:27:10 2011] Using EEF radius (= 0.51 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:27:10 2011] Initial guess for spatial extent in simple fitting = 0.51"
[Mon Sep 26 16:27:10 2011] source mask rpix=1.0, npix_max = 9, mask sum = 12, frac = 1.254
[Mon Sep 26 16:27:10 2011] Giving source the simple spatial ID 96 for pass 0, mean size = 0.51"
[Mon Sep 26 16:27:32 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src96.ximg exists
[Mon Sep 26 16:27:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src96.csv
[Mon Sep 26 16:27:32 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src96_1.ximg exists
[Mon Sep 26 16:27:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src96.csv
[Mon Sep 26 16:27:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src96_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:27:35 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src96.ximg exists
[Mon Sep 26 16:27:35 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src96_1.ximg exists
[Mon Sep 26 16:27:35 2011] Fit fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src96 appears to have run properly
[Mon Sep 26 16:28:44 2011] Spatial fit model total counts = 61.293500, observed total counts = 64.000000
[Mon Sep 26 16:28:44 2011] Offset between fit and detection position for source 167 = 0.789385 pixels
[Mon Sep 26 16:28:44 2011] 60.229900 total counts/ 36.366300 bgd. counts: snr = 3.957185
Spatial fit parameters:
  Offset between fit and detection position for source 167 = 0.789385 pixels
  Position = (391.7, 1038.5) = 17 45 28.87 -28 59 45.9
  Extent = 0.8 (0.6-1.4)", rotation angle = 0
  Source counts = 23.9 +/- 7.8
  Background counts = 36.4
  Rate = 0.0003 +/- 9e-05
[Mon Sep 26 16:28:45 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:45 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:45 2011] Source does appear to be extended
[Mon Sep 26 16:28:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:54 2011] Initial guess for spatial extent in simple fitting = 0.84"
[Mon Sep 26 16:29:54 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.029
[Mon Sep 26 16:29:54 2011] Giving source the simple spatial ID 81 for pass 1, mean size = 0.84"
[Mon Sep 26 16:29:58 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src81.ximg exists
[Mon Sep 26 16:29:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src81.csv
[Mon Sep 26 16:29:58 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src81_1.ximg exists
[Mon Sep 26 16:29:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src81.csv
[Mon Sep 26 16:29:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src81_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:30:01 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src81.ximg exists
[Mon Sep 26 16:30:01 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src81_1.ximg exists
[Mon Sep 26 16:30:01 2011] Fit fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src81 appears to have run properly
[Mon Sep 26 16:30:59 2011] Spatial fit model total counts = 61.317300, observed total counts = 64.000000
[Mon Sep 26 16:30:59 2011] Offset between fit and detection position for source 167 = 0.005878 pixels
[Mon Sep 26 16:30:59 2011] 60.271100 total counts/ 36.551200 bgd. counts: snr = 3.923395
Spatial fit parameters:
  Offset between fit and detection position for source 167 = 0.005878 pixels
  Position = (391.7, 1038.5) = 17 45 28.87 -28 59 45.9
  Extent = 0.8 (0.6-1.4)", rotation angle = 0
  Source counts = 23.7 +/- 7.8
  Background counts = 36.6
  Rate = 0.0003 +/- 9e-05
[Mon Sep 26 16:30:59 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:59 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:59 2011] Source does appear to be extended
[Mon Sep 26 16:30:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:46:01 2011] Not overwriting source region fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src167_src.reg
[Mon Sep 26 16:46:01 2011] Extracting stamp from image fullrun_ccd3_acisf03665_pi14-548_cl_sm2.00.img.gz, (354, 1000) - (430, 1076)
[Mon Sep 26 16:46:01 2011] Writing fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src167.gif
[Mon Sep 26 16:50:32 2011] ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src167_src.evt and ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src167_bgd.evt exist, delete to re-create
[Mon Sep 26 16:50:32 2011] Size of ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src167_src.evt.gz[events] = 44 counts
[Mon Sep 26 16:50:32 2011] Mean chipx,y = (650.20, 970.84)
[Mon Sep 26 16:50:32 2011] Mean tdetx,y = (4161.16, 3711.20)
[Mon Sep 26 16:50:32 2011] chipx,y range = (628.00-668.00, 955.00-995.00)
[Mon Sep 26 16:50:32 2011] Size of ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src167_bgd.evt.gz[events] = 305 counts
[Mon Sep 26 16:50:32 2011] ../../acisf03665/products/images/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src167_src.img and ../../acisf03665/products/images/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src167_bgd.img exist, delete to re-create
[Mon Sep 26 16:50:32 2011] ../../acisf03665/products/spectra/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src167_src.pi and ../../acisf03665/products/spectra/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src167_bgd.pi exist, delete to re-create
[Mon Sep 26 16:50:32 2011] Not generating rmf since there are only 23 counts
[Mon Sep 26 16:50:35 2011] ../../acisf03665/products/lightcurves/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src167_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src167_bgd.lc exist, delete to re-create
[Mon Sep 26 16:51:17 2011] 196.831
[Mon Sep 26 16:51:54 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:54 2011] Error reading totcts from fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src167_src.pi.gz
[Mon Sep 26 16:51:55 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:55 2011] Using photon index=1.80, rate=0.000264, arf fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src167.arf
[Mon Sep 26 16:51:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:55 2011] Updating source flux to 4.1e-15
[Mon Sep 26 16:54:00 2011] Source 167 has fewer than 100.000000 counts, skipping spectral fitting