[Mon Sep 26 16:23:08 2011] Detection parameters:
  Position = (1058.4, 904.4) = 17 45 3.84 -29 0 51.3
  Extent = 3.0" x 1.7", rotation angle = 78 degrees
  Source counts = 110.1 +/- 12.5
  Background counts = 45.9
  Rate = 0.001 +/- 0.0001

[Mon Sep 26 16:23:19 2011] Off-axis axis estimate = 8.10'
[Mon Sep 26 16:27:10 2011] Using EEF radius (= 2.90 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:27:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 16:27:10 2011] Initial guess for spatial extent in simple fitting = 2.90"
[Mon Sep 26 16:27:10 2011] source mask rpix=5.9, npix_max = 163, mask sum = 169, frac = 1.035
[Mon Sep 26 16:27:10 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 2.90"
[Mon Sep 26 16:27:12 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src15.ximg exists
[Mon Sep 26 16:27:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src15.csv
[Mon Sep 26 16:27:12 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src15_1.ximg exists
[Mon Sep 26 16:27:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src15.csv
[Mon Sep 26 16:27:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:27:33 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Mon Sep 26 16:27:33 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Sep 26 16:27:33 2011] Fit fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Mon Sep 26 16:28:44 2011] Spatial fit model total counts = 180.975000, observed total counts = 181.000000
[Mon Sep 26 16:28:44 2011] Offset between fit and detection position for source 155 = 0.802164 pixels
[Mon Sep 26 16:28:44 2011] 181.673200 total counts/ 83.482000 bgd. counts: snr = 10.746725
Spatial fit parameters:
  Offset between fit and detection position for source 155 = 0.802164 pixels
  Position = (1058.0, 905.1) = 17 45 3.88 -29 0 51.2
  Extent = 2.4 (1.8-3.2)", rotation angle = 0
  Source counts = 98.2 +/- 13.5
  Background counts = 83.5
  Rate = 0.001 +/- 0.0001
[Mon Sep 26 16:28:45 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:45 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:45 2011] Source does appear to be extended
[Mon Sep 26 16:28:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:54 2011] Initial guess for spatial extent in simple fitting = 2.39"
[Mon Sep 26 16:29:54 2011] source mask rpix=4.8, npix_max = 114, mask sum = 100, frac = 0.874
[Mon Sep 26 16:29:54 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 2.39"
[Mon Sep 26 16:29:56 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src14.ximg exists
[Mon Sep 26 16:29:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src14.csv
[Mon Sep 26 16:29:56 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src14_1.ximg exists
[Mon Sep 26 16:29:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src14.csv
[Mon Sep 26 16:29:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:29:59 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Mon Sep 26 16:29:59 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Mon Sep 26 16:29:59 2011] Fit fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src14 appears to have run properly
[Mon Sep 26 16:30:59 2011] Spatial fit model total counts = 153.993000, observed total counts = 154.000000
[Mon Sep 26 16:30:59 2011] Offset between fit and detection position for source 155 = 0.290665 pixels
[Mon Sep 26 16:30:59 2011] 154.548300 total counts/ 76.369200 bgd. counts: snr = 8.946055
Spatial fit parameters:
  Offset between fit and detection position for source 155 = 0.290665 pixels
  Position = (1057.8, 905.4) = 17 45 3.88 -29 0 51.0
  Extent = 2.0 (1.5-3.1)", rotation angle = 0
  Source counts = 78.2 +/- 12.4
  Background counts = 76.4
  Rate = 0.0009 +/- 0.0001
[Mon Sep 26 16:30:59 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:59 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:59 2011] Source does appear to be extended
[Mon Sep 26 16:30:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:45:58 2011] Not overwriting source region fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src155_src.reg
[Mon Sep 26 16:45:58 2011] Extracting stamp from image fullrun_ccd3_acisf03665_pi14-548_cl_sm2.00.img.gz, (967, 815) - (1148, 996)
[Mon Sep 26 16:45:58 2011] Writing fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src155.gif
[Mon Sep 26 16:46:53 2011] ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src155_src.evt and ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src155_bgd.evt exist, delete to re-create
[Mon Sep 26 16:46:53 2011] Size of ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src155_src.evt.gz[events] = 155 counts
[Mon Sep 26 16:46:53 2011] Mean chipx,y = (37.70, 677.46)
[Mon Sep 26 16:46:53 2011] Mean tdetx,y = (4454.54, 3098.70)
[Mon Sep 26 16:46:53 2011] chipx,y range = (11.00-64.00, 648.00-705.00)
[Mon Sep 26 16:46:53 2011] Size of ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src155_bgd.evt.gz[events] = 429 counts
[Mon Sep 26 16:46:53 2011] ../../acisf03665/products/images/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src155_src.img and ../../acisf03665/products/images/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src155_bgd.img exist, delete to re-create
[Mon Sep 26 16:46:53 2011] ../../acisf03665/products/spectra/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src155_src.pi and ../../acisf03665/products/spectra/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src155_bgd.pi exist, delete to re-create
[Mon Sep 26 16:46:53 2011] Not generating rmf since there are only 78 counts
[Mon Sep 26 16:46:57 2011] ../../acisf03665/products/lightcurves/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src155_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src155_bgd.lc exist, delete to re-create
[Mon Sep 26 16:51:15 2011] 166.168
[Mon Sep 26 16:51:53 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:53 2011] Error reading totcts from fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src155_src.pi.gz
[Mon Sep 26 16:51:54 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:54 2011] Using photon index=1.80, rate=0.000869, arf fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src155.arf
[Mon Sep 26 16:51:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:54 2011] Updating source flux to 1.6e-14
[Mon Sep 26 16:54:00 2011] Source 155 has fewer than 100.000000 counts, skipping spectral fitting