[Mon Sep 26 16:23:02 2011] Detection parameters:
  Position = (305.2, 442.4) = 17 45 32.08 -29 4 38.9
  Extent = 0.9" x 0.8", rotation angle = 123 degrees
  Source counts = 21.4 +/- 5.5
  Background counts = 8.6
  Rate = 0.0002 +/- 6e-05

[Mon Sep 26 16:23:19 2011] Off-axis axis estimate = 4.80'
[Mon Sep 26 16:27:10 2011] Using EEF radius (= 1.10 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:27:10 2011] Initial guess for spatial extent in simple fitting = 1.10"
[Mon Sep 26 16:27:10 2011] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 1.000
[Mon Sep 26 16:27:10 2011] Giving source the simple spatial ID 95 for pass 0, mean size = 1.10"
[Mon Sep 26 16:27:32 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src95.ximg exists
[Mon Sep 26 16:27:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src95.csv
[Mon Sep 26 16:27:32 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src95_1.ximg exists
[Mon Sep 26 16:27:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src95.csv
[Mon Sep 26 16:27:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src95_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:27:35 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src95.ximg exists
[Mon Sep 26 16:27:35 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src95_1.ximg exists
[Mon Sep 26 16:27:35 2011] Fit fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src95 appears to have run properly
[Mon Sep 26 16:28:44 2011] Spatial fit model total counts = 38.992800, observed total counts = 39.000000
[Mon Sep 26 16:28:44 2011] Offset between fit and detection position for source 123 = 1.063007 pixels
[Mon Sep 26 16:28:44 2011] 37.967400 total counts/ 13.265400 bgd. counts: snr = 6.782221
Spatial fit parameters:
  Offset between fit and detection position for source 123 = 1.063007 pixels
  Position = (306.0, 443.2) = 17 45 32.08 -29 4 38.8
  Extent = 1.1 (0.7-1.9)", rotation angle = 0
  Source counts = 24.7 +/- 6.2
  Background counts = 13.3
  Rate = 0.0003 +/- 7e-05
[Mon Sep 26 16:28:45 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:45 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:45 2011] Source does appear to be extended
[Mon Sep 26 16:28:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:54 2011] Initial guess for spatial extent in simple fitting = 1.10"
[Mon Sep 26 16:29:54 2011] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.203
[Mon Sep 26 16:29:54 2011] Giving source the simple spatial ID 80 for pass 1, mean size = 1.10"
[Mon Sep 26 16:29:58 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src80.ximg exists
[Mon Sep 26 16:29:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src80.csv
[Mon Sep 26 16:29:58 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src80_1.ximg exists
[Mon Sep 26 16:29:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src80.csv
[Mon Sep 26 16:29:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src80_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:30:01 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src80.ximg exists
[Mon Sep 26 16:30:01 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src80_1.ximg exists
[Mon Sep 26 16:30:01 2011] Fit fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src80 appears to have run properly
[Mon Sep 26 16:30:59 2011] Spatial fit model total counts = 38.520600, observed total counts = 39.000000
[Mon Sep 26 16:30:59 2011] Offset between fit and detection position for source 123 = 0.259417 pixels
[Mon Sep 26 16:30:59 2011] 38.208100 total counts/ 16.201400 bgd. counts: snr = 5.467372
Spatial fit parameters:
  Offset between fit and detection position for source 123 = 0.259417 pixels
  Position = (305.9, 442.9) = 17 45 32.08 -29 4 38.9
  Extent = 1.0 (0.7-1.6)", rotation angle = 0
  Source counts = 22.0 +/- 6.2
  Background counts = 16.2
  Rate = 0.0002 +/- 7e-05
[Mon Sep 26 16:30:59 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:59 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:59 2011] Source does appear to be extended
[Mon Sep 26 16:30:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:46:01 2011] Not overwriting source region fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src123_src.reg
[Mon Sep 26 16:46:01 2011] Extracting stamp from image fullrun_ccd3_acisf03665_pi14-548_cl_sm2.00.img.gz, (261, 398) - (351, 488)
[Mon Sep 26 16:46:01 2011] Writing fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src123.gif
[Mon Sep 26 16:50:27 2011] ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src123_src.evt and ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src123_bgd.evt exist, delete to re-create
[Mon Sep 26 16:50:27 2011] Size of ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src123_src.evt.gz[events] = 37 counts
[Mon Sep 26 16:50:27 2011] Mean chipx,y = (882.57, 416.89)
[Mon Sep 26 16:50:27 2011] Mean tdetx,y = (4715.11, 3943.57)
[Mon Sep 26 16:50:27 2011] chipx,y range = (862.00-905.00, 394.00-437.00)
[Mon Sep 26 16:50:27 2011] Size of ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src123_bgd.evt.gz[events] = 194 counts
[Mon Sep 26 16:50:27 2011] ../../acisf03665/products/images/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src123_src.img and ../../acisf03665/products/images/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src123_bgd.img exist, delete to re-create
[Mon Sep 26 16:50:27 2011] ../../acisf03665/products/spectra/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src123_src.pi and ../../acisf03665/products/spectra/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src123_bgd.pi exist, delete to re-create
[Mon Sep 26 16:50:27 2011] Not generating rmf since there are only 22 counts
[Mon Sep 26 16:50:32 2011] ../../acisf03665/products/lightcurves/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src123_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src123_bgd.lc exist, delete to re-create
[Mon Sep 26 16:51:17 2011] 188.442
[Mon Sep 26 16:51:54 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:54 2011] Error reading totcts from fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src123_src.pi.gz
[Mon Sep 26 16:51:55 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:55 2011] Using photon index=1.80, rate=0.000245, arf fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src123.arf
[Mon Sep 26 16:51:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:55 2011] Updating source flux to 4e-15
[Mon Sep 26 16:54:00 2011] Source 123 has fewer than 100.000000 counts, skipping spectral fitting