[Mon Sep 26 16:23:00 2011] Detection parameters:
  Position = (572.2, 259.9) = 17 45 22.06 -29 6 8.6
  Extent = 1.9" x 0.9", rotation angle = 74 degrees
  Source counts = 32.3 +/- 7.3
  Background counts = 20.7
  Rate = 0.0004 +/- 8e-05

[Mon Sep 26 16:23:19 2011] Off-axis axis estimate = 7.18'
[Mon Sep 26 16:27:10 2011] Using EEF radius (= 2.29 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:27:10 2011] Initial guess for spatial extent in simple fitting = 2.29"
[Mon Sep 26 16:27:10 2011] source mask rpix=4.7, npix_max = 106, mask sum = 100, frac = 0.941
[Mon Sep 26 16:27:10 2011] Giving source the simple spatial ID 62 for pass 0, mean size = 2.29"
[Mon Sep 26 16:27:20 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src62.ximg exists
[Mon Sep 26 16:27:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src62.csv
[Mon Sep 26 16:27:20 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src62_1.ximg exists
[Mon Sep 26 16:27:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src62.csv
[Mon Sep 26 16:27:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:27:34 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src62.ximg exists
[Mon Sep 26 16:27:34 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src62_1.ximg exists
[Mon Sep 26 16:27:34 2011] Fit fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src62 appears to have run properly
[Mon Sep 26 16:28:44 2011] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 114 at 18.083749 pixels away
[Mon Sep 26 16:28:44 2011] Spatial fit model total counts = 123.313000, observed total counts = 122.000000
[Mon Sep 26 16:28:44 2011] Offset between fit and detection position for source 114 = 0.759697 pixels
[Mon Sep 26 16:28:44 2011] 122.691800 total counts/ 100.640000 bgd. counts: snr = 2.198157
Spatial fit parameters:
  Offset between fit and detection position for source 114 = 0.759697 pixels
  Position = (573.0, 259.8) = 17 45 22.05 -29 6 8.9
  Extent = 0.9 (0.7-1.3)", rotation angle = 0
  Source counts = 22.1 +/- 11.1
  Background counts = 100.6
  Rate = 0.0002 +/- 0.0001
[Mon Sep 26 16:28:45 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:45 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:45 2011] Source does appear to be extended
[Mon Sep 26 16:28:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:54 2011] Initial guess for spatial extent in simple fitting = 0.94"
[Mon Sep 26 16:29:54 2011] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.862
[Mon Sep 26 16:29:54 2011] Giving source the simple spatial ID 57 for pass 1, mean size = 0.94"
[Mon Sep 26 16:29:57 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src57.ximg exists
[Mon Sep 26 16:29:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src57.csv
[Mon Sep 26 16:29:57 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src57_1.ximg exists
[Mon Sep 26 16:29:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src57.csv
[Mon Sep 26 16:29:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:30:00 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src57.ximg exists
[Mon Sep 26 16:30:00 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src57_1.ximg exists
[Mon Sep 26 16:30:00 2011] Fit fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src57 appears to have run properly
[Mon Sep 26 16:30:59 2011] Spatial fit model total counts = 48.997300, observed total counts = 49.000000
[Mon Sep 26 16:30:59 2011] Offset between fit and detection position for source 114 = 0.068732 pixels
[Mon Sep 26 16:30:59 2011] 43.651000 total counts/ 16.620600 bgd. counts: snr = 6.630238
Spatial fit parameters:
  Offset between fit and detection position for source 114 = 0.068732 pixels
  Position = (572.9, 259.9) = 17 45 22.05 -29 6 8.9
  Extent = 1.0 (0.7-1.9)", rotation angle = 0
  Source counts = 27.0 +/- 6.6
  Background counts = 16.6
  Rate = 0.0003 +/- 7e-05
[Mon Sep 26 16:30:59 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:59 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:59 2011] Source does appear to be extended
[Mon Sep 26 16:30:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:45:59 2011] Not overwriting source region fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src114_src.reg
[Mon Sep 26 16:45:59 2011] Extracting stamp from image fullrun_ccd3_acisf03665_pi14-548_cl_sm2.00.img.gz, (526, 213) - (620, 307)
[Mon Sep 26 16:45:59 2011] Writing fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src114.gif
[Mon Sep 26 16:49:12 2011] ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src114_src.evt and ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src114_bgd.evt exist, delete to re-create
[Mon Sep 26 16:49:12 2011] Size of ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src114_src.evt.gz[events] = 47 counts
[Mon Sep 26 16:49:12 2011] Mean chipx,y = (669.51, 172.70)
[Mon Sep 26 16:49:12 2011] Mean tdetx,y = (4959.30, 3730.51)
[Mon Sep 26 16:49:12 2011] chipx,y range = (652.00-690.00, 152.00-193.00)
[Mon Sep 26 16:49:12 2011] Size of ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src114_bgd.evt.gz[events] = 188 counts
[Mon Sep 26 16:49:12 2011] ../../acisf03665/products/images/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src114_src.img and ../../acisf03665/products/images/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src114_bgd.img exist, delete to re-create
[Mon Sep 26 16:49:12 2011] ../../acisf03665/products/spectra/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src114_src.pi and ../../acisf03665/products/spectra/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src114_bgd.pi exist, delete to re-create
[Mon Sep 26 16:49:12 2011] Not generating rmf since there are only 27 counts
[Mon Sep 26 16:49:15 2011] ../../acisf03665/products/lightcurves/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src114_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src114_bgd.lc exist, delete to re-create
[Mon Sep 26 16:51:17 2011] 174.443
[Mon Sep 26 16:51:54 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:54 2011] Error reading totcts from fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src114_src.pi.gz
[Mon Sep 26 16:51:55 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:55 2011] Using photon index=1.80, rate=0.000301, arf fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src114.arf
[Mon Sep 26 16:51:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:55 2011] Updating source flux to 5.2e-15
[Mon Sep 26 16:54:00 2011] Source 114 has fewer than 100.000000 counts, skipping spectral fitting