[Mon Sep 26 16:22:39 2011] Detection parameters:
  Position = (100.1, 963.7) = 17 45 39.78 -29 0 22.4
  Extent = 1.0" x 0.7", rotation angle = 102 degrees
  Source counts = 1613.3 +/- 46.2
  Background counts = 517.7
  Rate = 0.02 +/- 0.0005

[Mon Sep 26 16:23:19 2011] Off-axis axis estimate = 0.25'
[Mon Sep 26 16:27:10 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:27:10 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Mon Sep 26 16:27:10 2011] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.849
[Mon Sep 26 16:27:10 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.41"
[Mon Sep 26 16:27:11 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src1.ximg exists
[Mon Sep 26 16:27:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src1.csv
[Mon Sep 26 16:27:11 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Sep 26 16:27:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src1.csv
[Mon Sep 26 16:27:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03665_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:27:33 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Sep 26 16:27:33 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Sep 26 16:27:33 2011] Fit fullrun_ccd3_acisf03665_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Sep 26 16:28:44 2011] Spatial fit model total counts = 1845.460000, observed total counts = 1847.000000
[Mon Sep 26 16:28:44 2011] Offset between fit and detection position for source 1 = 3.683078 pixels
[Mon Sep 26 16:28:44 2011] 1803.207000 total counts/ 1095.740000 bgd. counts: snr = 21.372357
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.683078 pixels
  Position = (100.2, 967.4) = 17 45 39.80 -29 0 20.9
  Extent = 1.0 (0.9-1.1)", rotation angle = 0
  Source counts = 707.5 +/- 42.5
  Background counts = 1095.7
  Rate = 0.008 +/- 0.0005
[Mon Sep 26 16:28:45 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:45 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:45 2011] Source does appear to be extended
[Mon Sep 26 16:28:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:54 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 16:29:54 2011] Initial guess for spatial extent in simple fitting = 0.97"
[Mon Sep 26 16:29:54 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.018
[Mon Sep 26 16:29:54 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.97"
[Mon Sep 26 16:29:56 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src1.ximg exists
[Mon Sep 26 16:29:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src1.csv
[Mon Sep 26 16:29:56 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Sep 26 16:29:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src1.csv
[Mon Sep 26 16:29:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03665_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:29:58 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Sep 26 16:29:58 2011] fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Sep 26 16:29:58 2011] Fit fullrun_ccd3_acisf03665_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Sep 26 16:30:59 2011] Spatial fit model total counts = 1672.970000, observed total counts = 1673.000000
[Mon Sep 26 16:30:59 2011] Offset between fit and detection position for source 1 = 0.128416 pixels
[Mon Sep 26 16:30:59 2011] 1647.352000 total counts/ 1033.800000 bgd. counts: snr = 19.082405
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.128416 pixels
  Position = (100.2, 967.5) = 17 45 39.80 -29 0 20.8
  Extent = 0.9 (0.8-1.0)", rotation angle = 0
  Source counts = 613.6 +/- 40.6
  Background counts = 1033.8
  Rate = 0.007 +/- 0.0005
[Mon Sep 26 16:30:59 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:59 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:59 2011] Source does appear to be extended
[Mon Sep 26 16:30:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:45:57 2011] Not overwriting source region fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src1_src.reg
[Mon Sep 26 16:45:57 2011] Extracting stamp from image fullrun_ccd3_acisf03665_pi14-548_cl_sm2.00.img.gz, (60, 927) - (140, 1008)
[Mon Sep 26 16:45:57 2011] Writing fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src1.gif
[Mon Sep 26 16:46:09 2011] ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src1_src.evt and ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Sep 26 16:46:09 2011] Size of ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src1_src.evt.gz[events] = 1325 counts
[Mon Sep 26 16:46:09 2011] Mean chipx,y = (949.91, 978.88)
[Mon Sep 26 16:46:09 2011] Mean tdetx,y = (4153.12, 4010.91)
[Mon Sep 26 16:46:09 2011] chipx,y range = (924.00-973.00, 956.00-1002.00)
[Mon Sep 26 16:46:09 2011] Size of ../../acisf03665/products/events/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 3514 counts
[Mon Sep 26 16:46:09 2011] ../../acisf03665/products/images/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src1_src.img and ../../acisf03665/products/images/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Sep 26 16:46:09 2011] ../../acisf03665/products/spectra/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src1_src.pi and ../../acisf03665/products/spectra/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Sep 26 16:46:12 2011] ../../acisf03665/products/lightcurves/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src1_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Sep 26 16:51:15 2011] Keeping rmf generated by specextract
[Mon Sep 26 16:51:15 2011] 205.101
[Mon Sep 26 16:51:53 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:53 2011] Error reading totcts from fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Sep 26 16:51:54 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:54 2011] Using photon index=1.80, rate=0.00682, arf fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src1.arf
[Mon Sep 26 16:51:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:54 2011] Updating source flux to 1e-13
[Mon Sep 26 16:55:27 2011] Reading fit data from acisf03665/analysis//spectral/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src1_pl.csv
[Mon Sep 26 16:55:27 2011] Spectral fit parameter nH value = 1.96329e+23
[Mon Sep 26 16:55:27 2011] Spectral fit parameter PhoIndex value = 2.4714
[Mon Sep 26 16:55:27 2011] Failed to get F(0.3-8.0) from acisf03665/analysis//spectral/fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Sep 26 16:55:27 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:55:27 2011] Using Nh = 2e+23, photon index=2.47, rate=0.00682, arf fullrun_ccd3_acisf03665_pi14-548_pass1_cl_src1.arf
[Mon Sep 26 16:55:27 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:55:27 2011] Updating source flux to 2.1e-13