[Mon Sep 26 16:22:30 2011] Detection parameters:
  Position = (333.7, 167.4) = 17 45 40.40 -28 58 44.7
  Extent = 0.5" x 0.5", rotation angle = 58 degrees
  Source counts = 20.5 +/- 6.0
  Background counts = 15.5
  Rate = 0.0002 +/- 7e-05

[Mon Sep 26 16:22:38 2011] Off-axis axis estimate = 1.50'
[Mon Sep 26 16:27:00 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:27:00 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Sep 26 16:27:00 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.336
[Mon Sep 26 16:27:00 2011] Giving source the simple spatial ID 55 for pass 0, mean size = 0.39"
[Mon Sep 26 16:27:07 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src55.ximg exists
[Mon Sep 26 16:27:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src55.csv
[Mon Sep 26 16:27:07 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src55_1.ximg exists
[Mon Sep 26 16:27:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src55.csv
[Mon Sep 26 16:27:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:27:09 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src55.ximg exists
[Mon Sep 26 16:27:09 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src55_1.ximg exists
[Mon Sep 26 16:27:09 2011] Fit fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src55 appears to have run properly
[Mon Sep 26 16:28:31 2011] Spatial fit model total counts = 64.998700, observed total counts = 65.000000
[Mon Sep 26 16:28:31 2011] Offset between fit and detection position for source 42 = 1.158267 pixels
[Mon Sep 26 16:28:31 2011] 62.156300 total counts/ 43.649700 bgd. counts: snr = 2.801148
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 1.158267 pixels
  Position = (334.6, 168.1) = 17 45 40.38 -28 58 44.6
  Extent = 0.6 (0.4-0.9)", rotation angle = 0
  Source counts = 18.5 +/- 7.9
  Background counts = 43.6
  Rate = 0.0002 +/- 9e-05
[Mon Sep 26 16:28:31 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:31 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:31 2011] Source does appear to be extended
[Mon Sep 26 16:28:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:41 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Mon Sep 26 16:29:41 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.015
[Mon Sep 26 16:29:41 2011] Giving source the simple spatial ID 55 for pass 1, mean size = 0.60"
[Mon Sep 26 16:29:50 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src55.ximg exists
[Mon Sep 26 16:29:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src55.csv
[Mon Sep 26 16:29:50 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src55_1.ximg exists
[Mon Sep 26 16:29:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src55.csv
[Mon Sep 26 16:29:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:29:53 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src55.ximg exists
[Mon Sep 26 16:29:53 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src55_1.ximg exists
[Mon Sep 26 16:29:53 2011] Fit fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src55 appears to have run properly
[Mon Sep 26 16:30:46 2011] Spatial fit model total counts = 66.999800, observed total counts = 67.000000
[Mon Sep 26 16:30:46 2011] Offset between fit and detection position for source 42 = 0.023819 pixels
[Mon Sep 26 16:30:46 2011] 64.213300 total counts/ 46.425400 bgd. counts: snr = 2.610639
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 0.023819 pixels
  Position = (334.6, 168.0) = 17 45 40.38 -28 58 44.6
  Extent = 0.6 (0.4-0.9)", rotation angle = 0
  Source counts = 17.8 +/- 8.0
  Background counts = 46.4
  Rate = 0.0002 +/- 9e-05
[Mon Sep 26 16:30:46 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:46 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:46 2011] Source does appear to be extended
[Mon Sep 26 16:30:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:39:59 2011] Not overwriting source region fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src42_src.reg
[Mon Sep 26 16:39:59 2011] Extracting stamp from image fullrun_ccd2_acisf03665_pi14-548_cl_sm2.00.img.gz, (308, 142) - (361, 194)
[Mon Sep 26 16:39:59 2011] Writing fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src42.gif
[Mon Sep 26 16:43:35 2011] ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src42_src.evt and ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src42_bgd.evt exist, delete to re-create
[Mon Sep 26 16:43:35 2011] Size of ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src42_src.evt.gz[events] = 30 counts
[Mon Sep 26 16:43:35 2011] Mean chipx,y = (110.47, 902.97)
[Mon Sep 26 16:43:35 2011] Mean tdetx,y = (3963.97, 3975.53)
[Mon Sep 26 16:43:35 2011] chipx,y range = (89.00-125.00, 881.00-917.00)
[Mon Sep 26 16:43:35 2011] Size of ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src42_bgd.evt.gz[events] = 158 counts
[Mon Sep 26 16:43:35 2011] ../../acisf03665/products/images/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src42_src.img and ../../acisf03665/products/images/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src42_bgd.img exist, delete to re-create
[Mon Sep 26 16:43:35 2011] ../../acisf03665/products/spectra/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src42_src.pi and ../../acisf03665/products/spectra/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src42_bgd.pi exist, delete to re-create
[Mon Sep 26 16:43:35 2011] Not generating rmf since there are only 17 counts
[Mon Sep 26 16:43:38 2011] ../../acisf03665/products/lightcurves/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src42_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src42_bgd.lc exist, delete to re-create
[Mon Sep 26 16:45:55 2011] 205.374
[Mon Sep 26 16:51:51 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:51 2011] Error reading totcts from fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src42_src.pi.gz
[Mon Sep 26 16:51:52 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:52 2011] Using photon index=1.80, rate=0.000198, arf fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src42.arf
[Mon Sep 26 16:51:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:52 2011] Updating source flux to 3e-15
[Mon Sep 26 16:53:37 2011] Source 42 has fewer than 100.000000 counts, skipping spectral fitting