[Mon Sep 26 16:22:30 2011] Detection parameters:
  Position = (461.9, 135.2) = 17 45 35.59 -28 59 0.5
  Extent = 0.5" x 0.5", rotation angle = 124 degrees
  Source counts = 20.3 +/- 5.5
  Background counts = 9.7
  Rate = 0.0002 +/- 6e-05

[Mon Sep 26 16:22:38 2011] Off-axis axis estimate = 1.67'
[Mon Sep 26 16:27:00 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:27:00 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Mon Sep 26 16:27:00 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.575
[Mon Sep 26 16:27:00 2011] Giving source the simple spatial ID 57 for pass 0, mean size = 0.40"
[Mon Sep 26 16:27:07 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src57.ximg exists
[Mon Sep 26 16:27:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src57.csv
[Mon Sep 26 16:27:07 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src57_1.ximg exists
[Mon Sep 26 16:27:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src57.csv
[Mon Sep 26 16:27:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:27:09 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src57.ximg exists
[Mon Sep 26 16:27:09 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src57_1.ximg exists
[Mon Sep 26 16:27:09 2011] Fit fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src57 appears to have run properly
[Mon Sep 26 16:28:31 2011] Spatial fit model total counts = 65.853000, observed total counts = 67.000000
[Mon Sep 26 16:28:31 2011] Offset between fit and detection position for source 40 = 0.768578 pixels
[Mon Sep 26 16:28:31 2011] 66.586900 total counts/ 46.231500 bgd. counts: snr = 2.993716
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.768578 pixels
  Position = (462.6, 135.6) = 17 45 35.59 -28 59 0.6
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 20.4 +/- 8.2
  Background counts = 46.2
  Rate = 0.0002 +/- 9e-05
[Mon Sep 26 16:28:31 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:31 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:31 2011] Source does appear to be extended
[Mon Sep 26 16:28:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:41 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Mon Sep 26 16:29:41 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.248
[Mon Sep 26 16:29:41 2011] Giving source the simple spatial ID 57 for pass 1, mean size = 0.41"
[Mon Sep 26 16:29:50 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src57.ximg exists
[Mon Sep 26 16:29:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src57.csv
[Mon Sep 26 16:29:50 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src57_1.ximg exists
[Mon Sep 26 16:29:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src57.csv
[Mon Sep 26 16:29:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:29:53 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src57.ximg exists
[Mon Sep 26 16:29:53 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src57_1.ximg exists
[Mon Sep 26 16:29:53 2011] Fit fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src57 appears to have run properly
[Mon Sep 26 16:30:46 2011] Spatial fit model total counts = 59.123600, observed total counts = 59.000000
[Mon Sep 26 16:30:46 2011] Offset between fit and detection position for source 40 = 0.021565 pixels
[Mon Sep 26 16:30:46 2011] 60.911000 total counts/ 39.319300 bgd. counts: snr = 3.443372
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.021565 pixels
  Position = (462.6, 135.6) = 17 45 35.59 -28 59 0.6
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 21.6 +/- 7.8
  Background counts = 39.3
  Rate = 0.0002 +/- 9e-05
[Mon Sep 26 16:30:46 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:46 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:46 2011] Source does appear to be extended
[Mon Sep 26 16:30:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:39:59 2011] Not overwriting source region fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src40_src.reg
[Mon Sep 26 16:39:59 2011] Extracting stamp from image fullrun_ccd2_acisf03665_pi14-548_cl_sm2.00.img.gz, (443, 116) - (482, 155)
[Mon Sep 26 16:39:59 2011] Writing fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src40.gif
[Mon Sep 26 16:43:41 2011] ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src40_src.evt and ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src40_bgd.evt exist, delete to re-create
[Mon Sep 26 16:43:41 2011] Size of ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src40_src.evt.gz[events] = 26 counts
[Mon Sep 26 16:43:41 2011] Mean chipx,y = (226.81, 961.69)
[Mon Sep 26 16:43:41 2011] Mean tdetx,y = (4022.69, 3859.19)
[Mon Sep 26 16:43:41 2011] chipx,y range = (207.00-243.00, 945.00-979.00)
[Mon Sep 26 16:43:41 2011] Size of ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src40_bgd.evt.gz[events] = 98 counts
[Mon Sep 26 16:43:41 2011] ../../acisf03665/products/images/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src40_src.img and ../../acisf03665/products/images/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src40_bgd.img exist, delete to re-create
[Mon Sep 26 16:43:41 2011] ../../acisf03665/products/spectra/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src40_src.pi and ../../acisf03665/products/spectra/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src40_bgd.pi exist, delete to re-create
[Mon Sep 26 16:43:41 2011] Not generating rmf since there are only 21 counts
[Mon Sep 26 16:43:44 2011] ../../acisf03665/products/lightcurves/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src40_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src40_bgd.lc exist, delete to re-create
[Mon Sep 26 16:45:55 2011] 202.563
[Mon Sep 26 16:51:51 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:51 2011] Error reading totcts from fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src40_src.pi.gz
[Mon Sep 26 16:51:52 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:52 2011] Using photon index=1.80, rate=0.00024, arf fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src40.arf
[Mon Sep 26 16:51:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:52 2011] Updating source flux to 3.7e-15
[Mon Sep 26 16:53:37 2011] Source 40 has fewer than 100.000000 counts, skipping spectral fitting